Vial Washing Machine Dealers (83 products available)

Automatic linear vial washing machine, model: hvw-80/150&250  gmp suitable for washing of vials (2ml to 30ml) (dia. 14mm to 35mm) all contact parts made out from ss 316 entire frame covers & non contact parts made out from ss 304 needles enter in to the container during washing cycle to meet cgmp requirement low water consumption quick change over of parts for other size of containers complete flexibility with user for washing cycle machine provides 4 water washes, 3 air washes and 1 silicon (optional)   operation containers feed from the decartoning station (optional) are received on a unscrambler through visual inspection unit (optional). An infeed worm inverts container as neck down position and feeds them through specially design indexing device. The devicecarry the container forward and stops. nozzles carrier enters into the container and activates the jet of water/air.  the air/water flow is deactivated after  the washing cycle is over. device get indexing for next wash. a separate pumping station (optional) gives the right quantum of water at the desired pressure. in the absence of separate pumping station we can provide the recirculation & siliconising system on request. washed container are again inverted to neck upward position to collect in trays/directly feed to tunnel.

• Input Specification: Container Diameter: 15mm to 35mm
• Overall Dimension: 2300mm (L) X 850mm (W) X 915mm (H)

The Automatic Linear Vial Washing Machine is excellent for washing injectable glass vials of all varieties. This machine has been integrated with seven washing stations to speed up the regular process of washing with the best approach. This aspect of the machine can be customized based on the requirements of the customer. This Tunnel Type Vial Washing Machine offers four water washes and three air washes. It also offers the most positive and regulated pressurizing washes for vials. All the contact and noncontact parts are made of high quality stainless steel. The details of the variety of the material can be taken from the features that have been enlisted in the following few points. In accordance with the GMP requirements, vials are inverted into a neck down position and the nozzles are entered into vial during the completion of the washing cycles. For sterile vial filling lines, this Vial Washing Machine has proven to be the best solution till now.

Linear Vial Washing Machine is suitable for all kinds of bottles, vials, jars etc. It consists of following units. Brushing unit: Available in 2 or 4 heads. Have SS covered body and robust construction. Rotating Chucks are provided to hold the brushes of suitable size for brushing the bottles. Rinsing unit: each unit is made out of SS304, consists of 12 SS rinsers . valve is provided for controlling flow of water. Leak proof construction. Whole unit is constructed over a drainage tray to avoid spillage of water out of tank. Rubber corks are provided over rinsing tray to avoid chipping of bottles. SS tank with sink: Brushing and rinsing units are fitted on the SS tank. Waste water is stored or can be drained out by using sink. The whole structure is made out of 16 gauge SS. Motor Drive: 1HP, single phase. Output: up to 30 bottles with 2head, 1 rinsing unit.

Riddhi high speed vial washing machine with Grippers for washing of vials Having dimensions comprised in the specification. The in-line tunnel design is such that separation is maintained between feeding zone and discharge zone of the cleaned containers. All the mechanical drives are separated and isolated from the washing zone. A Top class materials only are used for manufacturing, with careful choice of components, thereby taking in to consideration of all aspects of sanitation and complying with the pharmaceuticals cGMP requirements.Salient Features The machine is suitable for washing of 2 ml to 100 ml vials. High Pressure spray nozzles enter in to the vials & ensure perfect wash Totally fabricated from S.S. Materials Including the basic frame. The entire washing process can be seen. No Change of Parts required for washing of vials - saving time of Change over All Parts coming in contact with washing zones / jets are made from S.S.316 material Water re-cycling arrangement is possible as per customer’s requirements Machine is totally sturdy and withstand continuous operation for long working hours without any trouble. Machine is with PLC system & Printing facility with passwords.

we are offering automatic high speed linear (tunnel type) vial washing machine description automatic vial washer is uses for the washing of pharmaceutical glass vials. machine is having six washing station for complete inner & outer washing of pharmaceutical glass vials. this model is most suitable for the online untouched aseptic filling line. salient features:- * provides production output up to 120 vials per minute. * all contact parts made from high quality stainless steel aisi ss 316l. * machine structure & other parts made from aisi ss 304 * ss tanks & trays made from ss 316l by argon welded with round corner. * ss pump made from ss 316l with mechanical seal monoblock pump. * ss filter housing made from ss 316l. * all nozzles made from ss 316l. * special pocket system ensures easy and trouble free washing of vials from outer and inner side. * indexing motion makes easier for syringes to move inside vial, when it is in stationery motion. * washing cycles can be adjusted as per customer requirement. * user friendly machine, even semi skilled operator can operate the machine very easily. * a special clutch device is incorporated for stoppage of machine in the event; vial is over turned or over diameter. * variable a.c. frequency drive for main drive and conveyor. * pumps with tank (60 litres each) 2 nos. * in feed wire woven belt for feeding of vials. * hdpe material vial pockets. * machine is totally robust and withstands continues operation for long working hours without any trouble. * machine is equipped with plc system & printing facility with passwords. * no change parts are required. * third tank & pump can be fitted (optional). process operation:- vials pushed from in feed tray and then move on wire woven conveyor belt, which align the vial in correct position, to enter in to the carrier pocket with help of oscillating guide rails. oscillating arm deliver the vial inside pocket in mouth down position over spraying nozzles. multijet sprayers fixed at the top cause the total external and internal surface to be washed. to avoid any possible cross contamination between two different waters, each washing station is provided with an independent circuit. carrier pocket is moving with indexing motion. when the baskets have completed their motion the needles are lifted. they penetrate the vials, spraying jets of water or compressed air then return down. the baskets movement then advances by one station. each station of vials passes through the washing cycles selected. the duly washed vials then delivered to the out feed tray with neck opening upward and then automatically re ordered to sterilizing tunnel with back pressure.

• Type: Vial Washing Machine
• Certification: CE Certified, ISO 9001:2008
• Application: Vial Filling
• Weight: 100-500kg
• Feature: Easy To Operate, Good Capacity, High Performance, Long Life, Low Maintainance, Rust Proof
• Voltage: 110V
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw
• Driven Type: Electric, Hydraulic, Mechanical
• Production Capacity: 10-50Tube/Minute, 100-150tube/Minute, 150-200Tube/Minute, 200-250Tube/Minute, 50-100Tube/Minute
• Warranty: 1year, 2years, 5years
• Country of Origin: India
• Brand Name: HMPL
• After-Sales Service Provided: Yes

• Driven Type: Mechanical
• Condition: New
• Automatic Grade: Automatic
• Power: 9-12kw, 6-9kw, 3-6kw, 12-15kw, 1-3kw
• Certification: ISO 9001:2008
• Feature: Rust Proof, Low Maintainance, Long Life, High Performance, Good Capacity, Easy To Operate
• Weight: 500-1000kg, 1500-2000kg, 1000-1500kg
• Warranty: 1year
• Vial Size: 2 ml to 30 ml Round Glass Vials
• Output Speed: 60 to 200 Vials/Minute
• Working Height: 875 ± 50MM Adjustable
• Air Consumption: 5 CFM
• Power Supply: 3 Phase + Neutral + Earthing / 415 V AC / 50Hz
• Wash Cycle: 7 Wash

The Linear Vial Washing Machine is specially designed to wash Vial with minimum contact of machine parts with Vials. We are an experienced organization engaged in offering our customers a perfectly designed Linear Vial Washing Machine. We customise our product as per client requirement.

We are offering automatic external filled vial washing machine. Complete cgmp construction & design can handle vial sizes from 5 ml (ø 25mm) to 100 ml (ø 54mm) with only change part of vial separators for proper positive feeding with required intervals 'no vial no washing' & 'no vial no air' system eliminates wastage of water & air. Machine is equipped with plc system. Has polycarbonate guards on machine. Machine stops if water in storage tanks's level goes below minimum & there is no inflow triggering alarms. Machine stops if the compressed air pressure drops below the set pressure and triggers alarms. Machine stops if any toppled vial inserts the track of the machine

• Type: Vial Washing Machine
• Certification: ISO 9001:2008
• Application: Vial Washing
• Weight: 100-500kg
• Feature: Good Capacity
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 1year
• Brand Name: LODHA
• After-Sales Service Provided: Engineers are available for service

We are a name to reckon with, when it comes to manufacture Automatic vial washing machines. These machines are flawlessly designed in sync with set industrial norms and standards. These are provided with high grade components and compatible for washing the pharmaceutical vials automatically and promptly. Our proficiency lies in customizing these machines in accordance with clients' specific demands Technical specifications Total cGMP ModelTotal machine Structure is made of S.S. PipeAll Water contract part will be Delrin / food grade materialBottom washing & Drying ensures Vials is cleanedChangeover time will be less then 10minNo Change parts required from 2ml to 100ml VialsMachine can be used for both Powder and Liquid Inject able LineSpecial Design Food grade Conveyor ensures water transfer from conveyor to drain tank, which does not allow water to transfer on drying station�No Vial � No Air/Water� Machine stop systemMachine Stop system�No Water� Machine Stop SystemCabinet door open machine stop systemPLC with touch screen HMISpecial micro Nozzles for bottom drying Properties Tensile strengthDurableSturdy designsLong lastingFlawless performanceCorrosion resistant

N.K Industries is pioneer in manufacturing range of Tunnel type Linear Vial Washing Machine. Various models are available to cater the requirement of Low production to Moderate and higher production as per the modern inject able plant requirement.

• Suitable for :: 5 ml to 30 ml Vials
• Air Consumption :: 12 to 15 CFM
• Water Consumption :: 450 to 650 Litre per hour
• Washing Zone:: Five zone can be set as per required sequence
• Water Tank :: 2 nos. Each with 50 Ltrs. Capacity
• Vial Diameter :: 20 mm to 32 mm*
• Electric Supply :: 220 VAC Single Phase Power Supply (50/60 Hz)
• Power :: 4.0 H.P.
• Speed :: Max. 90 to 120 Vials per minute depending on Vial Size
• Conveyor Height :: 815 to 940 mm
• Overall Dimensions :: 2800 mm (L) x 1675 mm (W) x 1675 mm (H)

The automatic linear vial washing machine is used for the washing of vials in the pharmaceutical industry. Linear vial washer comes in two models DLVW-150 and DLVW- 80. The model DLVW 80 has a capacity of washing 40 to 80 vials per minute where as DLVW-150 is capable of washing 60 to 150 vials per minute. Capacity of washing also depends on the size of vials or ampoules. Linear glass vial washer find application in a variety of industries like biotech, veterinary and pharmaceutical Industry. The machine is designed to consume less water and provide high efficiency. Different size of vials can be washed by the linear vial cleaning machine with the provision of change parts. Online vial washing machine is made up of stainless steel structure and covered with steel cabinet. Equipped with an infeed turn table, washing nozzles, conveyor and variable frequency drive the linear vial rinsing machine is ideal for washing of vials. Process of operation The vials are fed to the infeed tray and transferred to the conveyor belt which aligns the vials in the accurate position. The vials are inverted by an infeed worm and fed to an indexing device. Water nozzles enter the vials and sprays the jets of water inside the vials. The water stops after the completion of washing cycle. The vials are indexed by the indexing device for the next washing cycle. An optional pumping station offers the correct amount of water at required pressure.   Salient Features: Indexing device Adjustable washing cycles Safety clutch device Gear Motor for Main drive and conveyor Infeed conveyor belt system Change parts for different size of vials Contact parts made up of SS 316 4 Water Washes & 3 Air Washes

The Automatic Linear Tunnel type Vial Washing Machines Model VIALWASH-240 is suitable for Round Vials sizes of appx. 5 ml to 30 ml pack size with maximum speed of 240 Vials per minute, Specially designed machine also available for 2 ml Vial Size. Machine construction is in Stainless Steel finish including frame structure. All parts coming in contact with Washing Zone and Jets are made from SS-316 Materials. Intermittent handling of Vials ensures the maximum time for washing and also saves the Water through No Container - No Water system. Machine also offers various customized options for washing sequence as per customers requirements. Washing process takes place with Five different Washing Zones each with 10 nozzles for optimum washing. Machine also equipped with external washing of Bottles.

• Vial Dia.: 16mm to 38mm
• Power Requirements: 1 H.P. For Main Machine 0.5 H.P. For Un-scrambler (0.5 H.P. X 3 No) = 1.5 H.P. for Pumping station
• Vial sizes: 2ml to 30ml

Harsiddh engineering Co. is a recognized brand in the supply vial washing machines. The two popular automatic linear vial washing machines are the HLVW-150 and the HLVW-80 model. The HLVW- 150 has a throughput of 60-150 vials per minute while the HLVW-80 model has capacity of 40 to 80 vials per minute depending on vial size that ranges from 2ml to 20ml. Our vial washing machine has CE certification.The loading, cleaning and exit mechanisms are automatic and this increases the cleaning throughput and ensures minimum handling and contamination. The machines have a specially designed in-feed worm wheel that inverts vials and holds them on an indexing device ready for the first wash. The washing cycle is achieved through water and air nozzles that are directed on the inverted vials for maximum cleaning. The specially designed pumps supply water to nozzles at high pressure to effect the cleaning.

• Application: Ampoule Washing Machine
• After-Sales Service Provided: Engineers available to service machinery overseas
• Brand Name: Adinath
• Supply Ability: 5 Unit/Units per Month
• Model Number: AVRW-120
• Port: Mumbai

Automatic External Vial Washing Machine is designed to wash the outer surface of round shaped Vials. Machine washes the outer sides of Vials and eliminates the particles that are formed on the vials, which are previously filled and sealed. FeaturesComplete cGMP modelSuitable for vial sizes from 5ml to 100ml without any change parts (No change parts required)“No Vial – No Washing” system eliminates wastage of water & airEasy cleaning & maintainingMachine is equipped with PLC system.Stops supply of water & air when acrylic doors opened during operation.Indication & alarm in PLC.Normal water required for washing & no hot water requiredWhen there is no vial on conveyor, it stops the water & air supply. Infeed & outfeed Turn Tables.Imported Gear motor for main drive, unscrarnbler and scramblerVariable A.C frequency drive for main drive, unscrambler and scrambler Acrylic cabinet for machine. Form the in feed Turn Table the vials are fed into the External the Vial Washing Machine conveyors. The machine consists of two conveyors on which the vials are properly fed and transported from in feed Turn table for the washing operation. Two Operations are carried out on this machine. First the vials are washed by water jet and then dried by air jet. On the conveyor a set of spray nozzles are fitted on each on each conveyor for water Jet. One set of knife blocks are provided on each conveyor for air. The air sprayed through this knifes . The knifes are fitted in a inclined manner which ensures that is sprayed reaches each corner of the vial which are previously washer. After washing and drying the vials are guided to the out feed turn Table. Before reaching the out feed Turn Table a special arrangement is provided to dry the vial from the bottom side . A set of Syringes are provided on the sides of each conveyor at the exit end which sprays the air jet on the bottom part of vial resulting in the drying of the vials This machine is completely operated by PLC . A covering of Acrylic cabinet is provided in the machine which when opened up during the operation immediately stops the supply of water &air and shows the indication which alarm in the PLC.

• Type: Drying Machine
• Brand Name: Adinath
• Supply Ability: 5 Unit/Units per Month
• Packaging Details: Product & Transport Worthy Wooden Packing
• Model Number: AVRW-240
• Port: Mumbai
• Place of Origin: Gujarat, India

The Automatic Rotary Vial Washing Machine is specially designed to wash Vial with minimum contact of machine parts with Vials. Machine with specially designed Inverter system changes the direction to reverse / invert the vial and is feed to the infeed main star wheel, till the washing operation completed and again after washing release the vial on out feed Star wheel system in vertical position ensures positive wash of vials. Machine, is suitable for 2ml to 50ml Vials with the help of change parts, In special design it can be used for 100ml Vial Size also. Vial feeds through Turn Table to infeed Star Wheel and specially designed inverter wheel, that invert the vial and move it further on rotary moving system for Washing process. Machine suitable for application in Pharmaceutical Industries, The Vials traveling in neck down position in continuous motion above and along Washing Needles spraying by continuous jet for different washing cycles with the Needle bar ensures maximum time for washing. Machine with Standard Six or ten Different Washing Stations each of 6/10 Needle for optimum Washing and the sequence can be change as per customers requirement. Machine also having external wash for optimum washing of Vials. SPECIAL FEATURES:   All contact parts made of SS 316 material Machine construction in SS 304 Material Suitable for 2ml to 50ml and in special design up to 100ml size Washing sequence can be made as per customer requirements. Pumps with tank (60 liters each) 2 nos. Each washing zone with independent circuit to avoid contamination Automatic Infeed and Exit of Vials

The Automatic Rotary Vial Washing Machine is specially designed to wash Vial with minimum contact of machine parts with Vials. Machine with specially designed Inverter system changes the direction to reverse invert the vial and is feed to the infeed main star wheel, till the washing operation completed and again after washing release the vial on out feed Star wheel system in vertical position ensures positive wash of vials. Machine, is suitable for 2ml to 50ml Vials with the help of change parts, In special design it can be used for 100ml Vial Size also. Vial feeds through Turn Table to infeed Star Wheel and specially designed inverter wheel, that invert the vial and move it further on rotary moving system for Washing process.

• Frequency: 50 Hz
• Capacity: 120 bottle/min
• Voltage: 440 V
• Power: 2 HP
• Warranty: 12 Months
• Power Source: Electric
• Phase: Three
• Surface Finishing: Polished
• Body Material: Stainless Steel and Mild Steel

• Conveyor Height: 800 ± 50mm
• Power Supply: 5 to 7 HP, 3 Phase, 50Hz

Input Specification:- Std. 30m1 to 200m1 Bottles without any major change parts. Can accommodate different size of Bottles with the help of minimal change Parts. Special machines are available for other Size & Type of containers on request.

We are offering automatic external vial washing & drying machine. Model no. nkew - 100 nkew - 200 direction left to right left to right production rate up to 100 vialsmin. (for 5 ml vial) up to 200 vialsmin. (for 5 ml vial) electrical supply 5.0 hp 5.0 hp power requirement 415 volts, 3 phase (4 wire system), 50 hz 415 volts, 3 phase (4 wire system), 50 hz height of conveyor 900 mm (approx) 900 mm (approx.) dimensions 3400 mm (l) x 915 mm (w) x 1400 mm (h) 3470 mm (l) x 980 mm (w) x 1400 mm (h)

• Vial Dia: 15mm to 56mm
• Model: DAVW – 240
• Output: 30 to 40 Cycles/Hour (Each cycle’s time will be of 58 seconds)
• Ampoule Dia: 10mm to 21.5mm
• Ampoule Height: 60mm to 140mm
• Vial Height: 56mm to 110mm
• Overall Dimension: 1100 mm L X 1050 mm W X 1200 mm H
• Power Specification: 1.0 HP, 3 PHASE, 440 VOLTS, 50 Hz, 4 Wire System
• Change Part: – Multi-Jet Needles Plate
•  : – Comby Trays
• Utility: DM Water : 8 Liter/cycle
•  : WFI Water : 8 Liter/cycle (Depend Up-On Cycle Time)
•  : Air
• : 20 CFM @ 5 Bar: Internal /External Washes
• Washing Media: 1st Wash
• D. Water: 2nd Wash
• Air: 3rd Wash
• DM Water: 4th Wash
• Air: 5th Wash
• WFI Water: 6th Wash

• Features: Geneva Mechanism, Four inner (Included one air wash) & one outer., Sequence of washes to customer's choice, Easy operation, Easy loading and unloading
• Electrical supply: Three Phase + Neutral + Earthing
• Electrical load: 2 KW + 3KW for heater
• Air Pressure:  6 bar pressure 5 CFM

• Suitable for :: 5 ml to 100 ml Vials
• Air Wash :: Machine with Separate External Air Wash system
• Water Consumption :: 250 to 400 Litre per hour depending on vial size
• Air Consumption :: 5 CFM
• Washing Zone:: Washing zone can be set as per required sequence
• Water Tank :: 1 nos. with 25 Ltrs. Capacity
• Vial Diameter :: 20 mm to 44 mm*
• Electric Supply :: 220 VAC Single Phase Power Supply (50/60 Hz)
• Power :: 3.0 H.P.
• Speed :: Max. 60 Vials per minute depending on Vial Size
• Conveyor Height :: 815 to 940 mm
• Overall Dimensions :: 1850mm (L) x 650 mm (W) x 900 mm (H)

• Production Rate: 30 to 110 Vials/Min.
• Model:: AAVW-340
• -: 90 to 160 Ampoules/Min.
• Input Specification: -
• Ampoule Dia:: 10mm to 21.5mm
• Ampoule Height:: 60mm to 140mm
• Vial Dia.:: 15mm to 56mm
• Vial Height:: 56mm to 110mm
• Power Specification: 0.25 H.P.
• Electrical Characteristics: 440 Volts, 3 Phase, 4 Wire System, 50 Hertz
• Utility: -
• Distilled Water:: 2 kg/cm²
• Air:: 20 CFM @ 5 bar
• Overall Dimension: 990mm (L) X 860mm (W) X 940mm (H)

• Type: Automatic Linear Vial Washing Machine,Vial Washing Machine
• Application: Vial Filling
• Weight: 100-500kg
• Feature: Easy To Operate
• Voltage: 450V
• Condition: New
• Automatic Grade: Automatic,Fully Automatic
• Driven Type: Mechanical
• Production Capacity: 50-100Tube/Minute
• Warranty: 2years
• Country of Origin: India
• Brand Name: Vial In Injection
• Installation: 2years
• After-Sales Service Provided: Supine
• Product: Red
• Product: Red
• Product: Red