Withdrawal Sleeves Dealers (327 products available)

We are known for our Metal Withdrawal Sleeves E.N. 8, which are available in different sizes, diameters and other technical specifications. Dismounting of bearings is possible with the help of these sleeves. Moreover, these sleeves can be operated at high speed and can also captivate heavy loads. Our Withdrawal Sleeves are also offered to the customers in required quantity.

Withdrawal sleeves product codes start with AH or AHX. The X refers to a DIN revision index, which has now become standard. The product codes for withdrawal sleeves with oil grooves and oil ducts use the letters AOH or AOHX. Withdrawal sleeves whose product codes contain AOH or AOHX always have oil ducts in the bore and on the taper.

Sleeves or Spiral Bands are spirally wound single ply of coated abrasive used on expanding rubber drums. The unique construction of sleeves provides smooth, chatter-free operation, thereby giving the operator greater control of the tool. Sleeves are ideal for grinding, blending, deburring, smoothing, finishing & polishing a wide variety of flat & contoured metal surfaces including the inside of holes & other hard-to-reach areas. Sleeves are also effective on hardware with contours or intricate shapes.

We are the main supplier of this product.

Prominent manufacturer of Bearing Withdrawal Sleeve. It is used to fix bearings with a tapered bore on supported shafts (lean), the shaft must have a thread so the nut can move the sleeve against the bearing.

We offer curring oven. Photo of uncured busbar with 'rachem sleeve.

Our organization is one of the reputed processors of large range ofNatural Rubber Sleeve. these are very soft and flexible. they has a tendency of abrasion resistance. they have a high degree of insulation properties such as protecting from hot and cold. they are used in lots of machinery auto appliances. they are providing good damping performance and has low maintenance. Features : * Durable * Very soft * Damping performance Specifications : * Temperature Range : Upto 60oC * Rated Voltage : 600

A roller bearing having a tapered bore is mounted on a straight shaft using either an Adapter Sleeve assembly, or a Withdrawal Sleeve. Mounting a bearing on a sleeve also permits maximum flexibility in the axial positioning of the bearing on the shaft and can accommodate light locational thrust loads. An Adapter or a Withdrawal Sleeve mounted bearing requires the correct reduction of Radial Internal Clearance of the bearing so as to prevent relative motion amongst the bearing inner ring, the sleeve and the shaft. Non-compliance with proper mounting procedures will invariably lead to hot running of the bearing and subsequently to it's premature failure. Both the Adapter and the Withdrawal Sleeves have cylindrical bore and tapered outer surface, with threading on one side of the outer surface, and are slit along the length. While the Adapter Sleeve has the threading on the small diameter side of the taper, the Withdrawal Sleeve has the threading on the larger diameter side. Thus, the Adapter Sleeve facilitates easy mounting of the bearing, while the Withdrawal Sleeve is normally used to ensure easy dismounting of the bearing, hence it's name. An Adapter Sleeve assembly consists of the Sleeve, a Lock Nut and a Lock Washer, because the Lock Nut is needed first to drive the bearing up the tapered sleeve, and then to lock it in position with the help of the Lock Nut. A Withdrawal Sleeve, on the other hand, does not necessarily need the Lock Nut and the Lock Washer for it's assembly with the bearing and the shaft, and hence is supplied without them. However, a Withdrawal Nut may required to remove the Withdrawal Sleeve from the bearing, and in that case, it has to be ordered separately. The life of a bearing not only depends on the quality of the bearing, but on several other factors as well, which are equally important, such as : A) MACHINING ACCURACY: For the bearing to achieve life, the contact between it's bore and the Sleeve as well as that between the bore of the Sleeve and the Shaft should be between 85% to 90% of the contact surfaces. Hence the correctness of the taper and cylindricity of the bore of the sleeve as well as the concentricity and finishing along with perfect roundness, play a great role in achieving the contact area parameter. B) MATERIAL : The Sleeves should be made from Carbon Steel as per established International Standard Imported FKL Sleeves are manufactured from originally processed raw material (C20/C30) and machined in CNC machines to achieve the required machining accuracy and the surface finish, so that contact area is fully maintained to provide projected service life to the Bearing. FKL Bearing Housing and Sleeve together is an ideal combination to meet and enhance service life criteria of Bearings.

This is used to mount tapered bore bearing on to a cylindrical shaft with diameter tolerances. To secure the bearing to the shaft, press the withdrawal sleeve into the bearing bore. When using larger bearings, considerable force is required to overcome the friction between the mating surfaces of the bearing and sleeve and of the sleeve and shaft. These withdrawal sleeves also facilitate secure and easy dismounting by simple pressure on the disassembly nut.  

Sleeves can be used on plain shafts allowing the bearing to be positioned as required and locked into place or on stepped shafts with a seating ring to set the bearing off a shoulder before locking it into position, We have in different kind of makes like MTN, RAJA and etc.,

We are well known for supplying of wide variety of Withdrawal Sleeves.

High dexterity Golden Yellow split cowhide leather Leather thickness 1.3/1.4 mm Over-shoulder sleeve with adjustable cuff KEVLAR stitched

We are one of the paramount Sleeves manufacturers and suppliers. All kinds of sleeves are available with us. Trustworthy and long-lasting are some of the salient features of our products. Different types of sleeves are easily available at the most acceptable price.

We are a well-known Automotive Sleeves Manufacturer in India whose products are of international standards. The Cylinder Sleeves are manufactured in the latest technology ensuring high level performance. These Sleeves are thats why highly in demand in the market. We are placed among the renowned Suppliers Cylinder Sleeves in India.

Withdrawal Sleeve are suitable where bearing with the tappered bore are to be located on cylindrical shafts. The tapered sleeve is pressed into the bearing bore until the required reduction in radial internal cleaerance is achieved. The bearing is abutted, for example against a shoulder on the shaft. The tensile strength of material atleat 430N/mm2. The outside surface of the sleeve has a taper of 1:12, in series AH240 and AH241 tapper is 1:30.

Applications Van Beest offers a wide range of sleeves, in both aluminium and carbon steel. Range Aluminium wire rope sleeves are manufactured according to DIN 3093 A. For safety in fabrication and application our sleeves are of seamless construction corresponding with the requirements of DIN 3093 A regarding material composition and mechanical properties. Prescon carbon steel sleeves are manufactured from carbon steel and feature the Swaging Verification System in which the colour changes intensity after swaging. This system helps the sling manufacturer to determine whether or not the sleeve has been pressed. The sleeves are of seamless construction and fit industry standard dies. Design Aluminium sleeves are self coloured. The smaller dimensions of Prescon sleeves, up to and including 16 mm, are colour coded, larger dimensions are self coloured. \

We are a foremost adapter sleeve manufacturer, originated in India. Different types of Withdrawal Sleeve can be easily obtained from single shop named as Michael International. We strictly use top quality raw material in the entire manufacturing process which is procured from the noted suppliers throughout the world. We are one of the well-known withdrawal sleeve exporters, presenting withdrawal sleeve. We have considerable expertise in the manufacturing and exporting of different types of withdrawal sleeve, adapter withdrawal Sleeve, adapter sleeve etc.

CNC sleeves are hardened steel and ground internally and externally, With either clamping slots or clamping screws in them. This CNC sleeve also Ensures the boring bar is on the correct center height of the CNC lathe. Customized design can be supplied upon request. We stand as one of the prominent, Wholesaler, Retailer, Trader, Distributor and supplier of Sleeves. These are highly appreciated for their superior performance and are known for their optimum quality. Our range of sleeves is designed to withstand extreme conditions. These are offered at affordable rates. These find their usage in different industrial application including Cement industries, Steel industries, Power industries, Engineering industries and other industries. Features : Appreciated for their superior performance Usage in different industrial application 

We are a leading manufacturer, supplier, and exporter engaged in offering Sleeves in India. These sleeves are made of high-quality steel and Aluminium alloys, cutting-edge technology and advanced machinery these sleeves are utilized for persistent covering all pipeline or inner covering from the welding procedure. Our sleeves are available to clients in many measurements to choose from. They are highly obliged for their high Rigidity, rust resistance and light weight. Additionally, our client can avail these products from us at a reasonable price. Features:- Easy to use Corrosion resistant Light weight Rust resistance Cost saving High Rigidity

• Material: Cast Iron

Withdrawal Unit with Gear Box offered are attached to the stand on a common base with main frame of welded steel construction so as to provide for durable finish quality. These units come with top rolls that are hydraulically adjustable as well as bottom rolls that are mounted on the frame. For superior functional value, these rolls are made of heat-resistant steel where each comes fitted with self-aligning spherical roller bearing, sealing ring and cover option mounted in the bearings housing.Features:    Features long-working life and easy to operate options Can be made available in different rod sizes including 10 To 30 mm

Shaft dia :- 200 to 600 mmExternal Taper 1:12 on ODMaterial: C20 / C30 Carbon SteelMfg. Standard: IS 8656-1977ISO 113/I-1979

• Color: Silver
• Material: Stainless Steel
• Finish: Polished
• Pack Type: Box
• Pack Size: 50 Piece
• Grade: 316

• Material: Cast Iron
• Country of Origin: Made In India
• Shape: Round
• Usage/Application: Forklift Part
• Thread Type: Half Threaded
• Size: 2 Inch

Withdrawal sleeves product codes start with AH or AHX. The X refers to a DIN revision index, which has now become standard. The product codes for withdrawal sleeves with oil grooves and oil ducts use the letters AOH or AOHX. Withdrawal sleeves whose product codes contain AOH or AOHX always have oil ducts in the bore and on the taper. Sleeves with the code numbers 240.. and 241.. have a 1:30 taper, all the others have a 1:12. Suffixes Since 1997, there have been withdrawal sleeves with the suffix G. The G indicates a change of thread size. With withdrawal sleeves and adapter sleeves having different thread sizes, attempts have been made to standardise them. These standardisation efforts are inspired by a desire to reduce nut variation.

• Brand Name: KT

Withdrawal sleeves product codes start with AH or AHX. The X refers to a DIN revision index, which has now become standard. The product codes for withdrawal sleeves with oil grooves and oil ducts use the letters AOH or AOHX. Withdrawal sleeves whose product codes contain AOH or AOHX always have oil ducts in the bore and on the taper. Sleeves with the code numbers 240.. and 241.. have a 1:30 taper, all the others have a 1:12. Suffixes Since 1997, there have been withdrawal sleeves with the suffix G. The G indicates a change of thread size. With withdrawal sleeves and adapter sleeves having different thread sizes, attempts have been made to standardise them. These standardisation efforts are inspired by a desire to reduce nut variation.

Withdrawal Sleeves, Adapter Sleeves, Plummer Block, Pillow Block

Withdrawal Sleeves, Adapter Sleeve, bearing lock washers