Nickel Dealers (228 products available)

We are one of the leading exporter & stockist of stainless steel, inconel, monel, hastelloy, titanium, cupro nickel, duplex & super duplex stainless steel ferrous and non ferrous metals such as pipe and SS pipe fitting. Engaged in exporting of steel tubes, steel pips, stainless steel pipes, stainless steel tubes etc. We are a professionally managed company started by a team of dynamic young entrepreneurs. We are in the business of exporting and importing of forged pipe fittings, nickel alloy pipe fittings, ferrous & non-ferrous metals products used in various core industries.

5CORE® presents BANANA-JACK-NICKEL with golden-plated RCA ends that keep the device safe and shockproof during an active connection. It renders electrical-resistivity and conductivity.    

• Material: Nickel
• Shape: Square
• Condition: New
• Usage: Manufacturing Projects, High end industry
• Surface: Polished
• Density: 8.9g/cm3

For high-quality cylinder locks and locking systems, cylinder cores are made from wear-resistant Cu-Ni Sheets (Cu-Ni Plates). As a supplier, stockiest, exporter and manufacturer, we provide these Plates, Sheets & Coils in custom-built thicknesses and sizes according to exact requirements of our well-regarded patrons.We offer the same at economical prices to our consumers.

Nickel 200 is commercially pure (99.6%) wrought nickel. It has good mechanical properties and excellent resistance to many corrosive environments. Other useful features of the alloy are its magnetic and magnetostrictive properties, high thermal and electrical conductivities, low gas content and low vapor pressure. The corrosion resistance of Nickel 200 makes it particularly useful for maintaining product purity in the handling of foods, synthetic fibers, and caustic alkalies; and also in structural applications where resistance to corrosion is a prime consideration.

Cupronickel (also referred to as "cupernickel" or copper-nickel alloy) refers to a group of copper-nickel alloys that are used in saltwater environments due to their corrosion resistant properties. The most common cupronickel alloys are: 90/10 Cupro-nickel (copper-nickel-iron) 70/30 Cupro-nickel (copper-nickel-iron) These alloys have good working properties, are readily weldable and considered insensitive to stress corrosion. Cupronickel is also resistant to biofouling, crevice corrosion, stress corrosion cracking and hydrogen embrittlement. Slight differences in corrosion resistance and strength generally determine which alloy grade is used for a particular application Corrosion Resistance: Cupronickel resists corrosion in seawater because its electrode potential is essentially neutral in such environments. Consequently, it will not form electrolytic cells when placed in close proximity to other metals within an electrolyte, which is the main cause of galvanic corrosion. Copper also naturally forms a protective oxide layer on its surface when exposed to seawater, which protects the metal from deterioration. Applications: Cupronickel is used in: tubes for light-duty condensors, feedwater heaters and evaporators used in power stations and desalination plants pipes carrying seawater to fire mains, cooling water systems and ship sanitary systems underwater fencing cabled tubes for hydraulic and pneumatic lines fasteners, crankshafts, hulls and other marine hardware used in boats silver-colored circulation coins silver-plated cutlery automobile parts jewelry cylinder cores in high-quality locks

Our Cupro Nickel Ingots are high quality metal products delivering unmatched results.The addition of nickel to copper improves strength and corrosion resistance while allowing the alloy to remain ductile. Other elements can be added to copper-nickel to increase strength, corrosion resistance, hardening, weldability and castability.

We offer Cupro Nickel Plates that find a number of applications in different industries. The Cupro Nickel Plates are made available in different sizes, widths and grades to suit the various industrial applications. Our Cupro Nickel Plates are sturdy, long-lasting and can bear climate effects quite efficiently.

Raw Nickel is a silvery-white lustrous metal with a slight golden tinge.  Raw Nickel is ferromagnetic around room temperature and therefore, it is used in the production of stainless steel. Headquartered in Kolhapur, we are involved in manufacturing and supplying superior grade Raw Nickel. Our Raw Nickel is suitable for manufacturing nickel cathodes, sheet, chis, uncut, pellets rpunds etc.

Swagat Steel And Alloy stock and supply a wide range of pressure vessel steel plate grades for working environments where safe operating pressure is critical. Our pressure vessel steel is of Western Europe and Indian origin which is the steel of choice for the world's boiler & pressure vessel fabricators.  Prosaic Steel & Alloys have a global reputation for the supply of high quality pressure vessel steel to these fabricators and many of them are suppliers to some of the world's largest gas, oil and petrochemical companies. The Following Grades We Serve in Pressure Vessel Steel Plates ASTM A285 | ASME SA285 | ASTM A516 | ASME SA516 | ASTM A537 | ASME SA537EN 10028 | BS 1501 | DIN 17155 |

Cupro Nickel It has very good corrosion resistance to clean moderately polluted marine or estuary water, even containing dissolved incondensable gases. This alloy is virtually immune from stress-corrosion cracking and hot spot denickelification.

With the assistance of our automated warehousing system, we are able to properly organize and stack the products in our well-structured warehouse. Thus, we ensure zero defects at buyer's end. We are recognized as a trustworthy Supplier presenting an extensive assortment of Saree Guard C D Down Nickel.

Trunk Lock

High Nickel Nickel which keeps it from being embrittled by intergranular precipitates at temperatures of 600° F to 1400° F in many processes. Typically, the elemental restrictions of both, nickel 200 and nickel 201, are combined into one, dual-certified chemistry resulting in a single alloy with the desired characteristics of both alloys, Nickel 200201.

• Application: Industrial
• Color: Black
• Physical State: Granules
• Grade Standard: Reagent Grade
• Shelf Life: One year
• Feature: Cost Effective

• Type: Tubs
• Material: Metal, 100% Copper
• Age Group: Adults
• Size: 72 x 30 x 30 Inches /Customized
• Finish: Copper Antique/ Polished/Black/Natural Copper
• Place of origin: Made In India
• Metal Type: Copper
• Model Number: SPT-003
• Supply Ability: 50 Piece/Pieces per Month
• Product: General Bath Barrel
• Port: Nhavasheva Mumbai (India)

• Size ( mm): 2.50

Ferro nickel for welding of cast iron having excellent operating characteristics like smooth and steady arc, minimum spatter, good positional welding capability and easy slag removal. Weld deposit possesses superior strength and deposit is machinable.

• Dinnerware Type: Dishes & Plates
• Shape: Square
• Material: Metal
• Feature: Eco-Friendly
• Quantity: 1

We are offering inco nickel. Specifications forms squares 4" x 4", 4" x 24" , 2" x 2", 1" x 1" full-sized cathodes typical chemical analysis nickel plus cobalt - 99.99% cobalt 0.05% sulfur 0.0002%

• Type: Urn
• Supply Ability: 2000 Piece/Pieces per Month
• Style: American Style
• Brand Name: Aromatic
• Model Number: 2406-L
• Place of Origin: Uttar Pradesh, India
• Port: Mumbai

We deal in manufacturing of a vast range of Cupro Nickel Plates, which finds applications in various industries, such as Petrochemicals Plants, Oil Refineries, Pharmaceuticals and Textile. These are manufactured using quality cupro nickel, which makes these plates corrosion resistant, durable with good tolerance level. Our range is available in a variety of sizes and can also be custom made as per client's specifications.  Features High corrosion resistance High strength and durable Light weight Sturdy construction Perfect finish

A high-purity nickel with a minimum temperature-coeffecient of resistance of 0.006/ºC over the range 0-100ºC. Made by the powder metallurgy process. Used for components of special valves such as hydrogen thyratons and for electric resistance thermometers and controls.

Since the process requires no electric current thus the result is a very Uniform Coating in each and every area of the job (like a blind holes, threads, channels, recesses or internal areas receive the same amount of plating as sharp corners, edges or flat surfaces). Thus plating ovality can be occur within 5 microns so that post grinding of machining to size can be eliminated.

• Type: Pure Nickel
• Material: Nickel
• Application: Construction, Electronics
• Color: Light Brown
• Technics: Welded Mesh
• Condition: New, Used
• Finishing: Non Polished, Polished
• Feature: Crack Proof, Easy To Fit, Excellent Quality, Fine Finished, High Strength, Perfect Shape
• Certifications: ISI Certified