Paalsun Engineers (India) Pvt. Ltd. Ambattur, Chennai, Tamil Nadu

  • UF Skid And Piping System

    UF Skid And Piping System

    Request for Price

    We install UF skid and piping system in accordance with clients specification. Developed using SS (SS304 / 304L, 316/316L), the UF skid and piping system is extensively used in water purification industry. Features: • Easy to operate • High efficiency • Corrosion resistant • Sturdy

    ...more
    Get Best Price
  • steel diesel tanks

    steel diesel tanks

    Request for Price

    steel diesel tanks is fabricated using MS (IS2062), SS (SS304 304L, 316316L), CS (SA516) Features: • Leakage proof • Corrosion resistant • High efficiency • Sturdy

    ...more
    Get Best Price
  • Sewage Treatment Plants

    Sewage Treatment Plants

    Request for Price

    We offer sewage treatment plants that is designed for reprocessing of water for gardening, irrigation flushing purpose. The waste water of commercial and residential complex is treated by these sewage treatment plants. We install these sewage treatment plants as per the specification of client. Features: • Safe and sturdy • High performance • Easy to operate • Corrosion resistant

    ...more
    Get Best Price
  • Sand Filters And Carbon Filters

    Sand Filters And Carbon Filters

    Request for Price

    We offer sand filters and carbon filters which uses a natural media based filtration technology, which treats water or wastewater with turbidity, odor & color. In this different layers of graded sand & pebbles are used for filtration. In activated carbon filters surface area OS anthracite is increased to many folds by special process. this helps to trap unwanted odor, color & gases in water. Both PSF (Pressure Sand Filter) & ACF (Activated Carbon Filter) are offered in manual & automatic modes. Applications: •Industries(textile,dying,chemical,pharmaceutical etc.) • Hospitals • Schools & Colleges • Shopping malls • Housing colonies • Theaters

    ...more
    Get Best Price
  • Plate Separators

    Plate Separators

    Request for Price

    Lamella plate separators (LPS) consists of two main components, the upper tank containing the lamella plates inclined at 55 degree and the lower conical or cylindrical sludge tank. The feed for the LPS enters through vertical chambers on either side of the lamella packs and passes into each plate gap through slotted feed ports. Clarification takes place above the suspension inlet so there is no mixing of the clarified fluid with the incoming feed. Above each pack is a full-length overflow launder fitted with throttling holes to create a slight hydraulic back pressure on the incoming feed stream. This method of feed control guarantees equal distribution to all lamella chambers with minimum turbulence at the entry points. The solids settle onto and slide down each lamella plate to the sludge tank where the solids are further thickened and compressed with the assistance of the raking system. Advantages: • Heavy duty construction of tank, sludge hopper and lamella plate packs, as well as the rake system. Rake lifting mechanism as option. • Positioning of specifically designed feed ports for optimum ratio between clarification and thickening area • Wide spacing of lamella plates to handle high density feed pulps and coarse solid particles. • No short circuiting or surface turbulence • Integrated flocculator with variable speed stirrer Lower Installation Costs: • Delivered as one-piece unit or in prefabricated sections • Smaller foundations • less floor space • Square outline for easier planning and construction. Flexibility For Plant Changes Or Extension: • Can be installed in any system • Easy to relocate to adapt to process changes Simplified In Plant Installation: • Shorter pipe work runs. • High level installation for gravity feed to downstream Processes • Easier supervision. Small Internal Volume And Surface Area: • Easily insulated against heat loss or toxic fume emissions • Evaporative losses are minimized. Simple Construction Of Sheet Steel And Standard Profiles: • Special materials and coatings can easily be incorporated • Easy to maintain

    ...more
    Get Best Price
  • Piping Skids

    Piping Skids

    Request for Price

    We install UF skid and piping system in accordance with clients specification. Developed using SS (SS304 304L, 316316L), the UF skid and piping system is extensively used in water purification industry. Features: • Easy to operate • High efficiency • Corrosion resistant • Sturdy

    ...more
    Get Best Price
  • mixed bed vessel

    mixed bed vessel

    Request for Price

    Our mixed bed is based on latest technology and widely used in water purification industry. The mixed bed consists of strong acid cation exchange and strong base anion exchange resin that is used for purification of water. Features: • Long functional life • High efficiency • Corrosion resistant

    ...more
    Get Best Price
  • LP and HP Dosing System

    LP and HP Dosing System

    Request for Price

    We offer one of the finest engineered dosing systems manufactured with a mixture of materials such as carbon steel or stainless steel for base support frames, and pipe work in stainless steel or high alloys. These dosing systems are suitable for use in on and off shore industries including petrochemical, pharmaceutical, oil and gas, paper, food, nuclear power and bio-technology. Our range of HP dosing systems and LP dosing systems incorporate suction and discharge pipes which swiftly and safely deliver the chemicals to their destination and help our clients to reduce or prevent corrosion and deposition of the fluids being carried. These chemical dosing skids are manufactured to meet individual requirements and are both accurate and durable for all industrial applications. Product types include mixing, chemical dosing. Our chemical dosing skids can also be used in a range of applications where vessels, pipe work, valves, controls and filters among others combine. Key Features: • Meet international quality standards • Cost efficient and ensure the highest quality standards • Maximum dimensions per section • All products are fully welded and tested

    ...more
    Get Best Price
  • Heat Exchanger Skid

    Heat Exchanger Skid

    Request for Price

    We offer high quality heat exchanger skid which is used in water treatment plant. The heat exchanger skid boasts numerous benefits to the client which includes: • An intelligent valve actuator and controller • Stainless steel construction

    ...more
    Get Best Price
  • electrical control gears

    electrical control gears

    Request for Price

    Get Best Price
  • Effluent Treatment Plants

    Effluent Treatment Plants

    Request for Price

    We work for effluent treatment plants mostly all kind of industries, which generate mild to highly polluted waste water requiring simple to extensive treatment to meet the required level of treatment. We have achieved 100% success rate in treating industrial effluent and helped industries to achieve zero discharge. Our technologies for effluent treatment plants (ETP) includes from conventional chemical, activated sludge to most advance MBR, electro-cell process. Storage Tanks - We provide storage tanks, which is fabricated using CS (SA516), MS (IS2062), SS (SS304 / 304L, 316/316L). Based on latest technology, these storage tanks are used for storing solvents, chemicals and other liquids in apt manner. Due to excellent efficiency, these storage tanks are widely used in various industries. Features: • Low maintenance • Robust construction • Corrosion resistant • Easy to clean  

    ...more
    Get Best Price
  • Dosing Skids (Mounted Package Units)

    Dosing Skids (Mounted Package Units)

    Request for Price

    We offer one of the finest engineered dosing skids manufactured with a mixture of materials such as carbon steel or stainless steel for base support frames, and pipe work in stainless steel or high alloys. These dosing skids are suitable for use in on and off shore industries including petrochemical, pharmaceutical, oil and gas, paper, food, nuclear power and bio-technology. Our range of dosing skids incorporate suction and discharge pipes which swiftly and safely deliver the chemicals to their destination, and help our clients to reduce or prevent corrosion and deposition of the fluids being carried. These chemical dosing skids are manufactured to meet individual requirements and are both accurate and durable for all industrial applications. Product types include mixing, scrubbing, filtering, reactors, stripping, chemical dosing and cooking. Our chemical dosing skids can also be used in a range of applications where vessels, pipe work, valving, controls and filters among others combine. Key Features: • Meet international quality standards • Cost efficient and ensure the highest quality standards • All products are fully welded and tested

    ...more
    Get Best Price
  • Diamond Cutting Tools

    Diamond Cutting Tools

    Request for Price

    Get Best Price
  • Chemical Preparation Tanks

    Chemical Preparation Tanks

    Request for Price

    Our chemical preparations tanks is fabricated using MS (IS2062), SS (SS304 / 304L, 316/316L), CS (SA516). Available in high volume capacity, these chemical tanks ensures accurate formulation of chemicals. Features: • Leakage proof • Corrosion resistant • High efficiency • Sturdy

    ...more
    Get Best Price
  • Cable Jointing Kits

    Cable Jointing Kits

    Request for Price

    Get Best Price
  • Electrical Switch Gears

    Electrical Switch Gears

    Request for Price

    Get Best Price
  • Precision Component

    Precision Component

    Request for Price

    Get Best Price
  • Sheet Metal Component

    Sheet Metal Component

    Request for Price

    Get Best Price

Services

  • Reverse Osmosis Systems

    Reverse Osmosis Systems

    Request for Price

    We manufacture reverse osmosis systems, which are specifically used to eliminate excess TDS and harmful bacteria from water. Fabricated PVC/ SS (SS304 / 304L, 316/316L), Duplex SS, these reverse osmosis systems are used for treatment of water for reduction of high dissolved solids. Features: • High efficiency • Corrosion resistant • East to operate • Durable

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers
  • Year of Establishment 2001
  • No. of Employees Below 20
  • Annual Turnover Rs. 0.5 to 2.5 Crore Approx.

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Paalsun Engineers (India) Pvt. Ltd. - Retailer of Adhesive Tapes, Cable Jointing Kits, Cable Lugs, Cable Terminals, Diamond Cutting Tools, electrical control gears, Electrical Switch Gears, ht fasteners, Industrial Tools, Precision Component in Chennai, Tamil Nadu.
Read More »

Contact Information

Paalsun Engineers (India) Pvt. Ltd.

  • Mr.. K. Alagudurai
  • No:5,Balaji Nagar, Ambattur, Chennai, Tamil Nadu
top