Dosing System Dealers in Chennai

The HI900100 dosing pump can be used to provide an additional or replacement pump for either the HI901, HI902C, or HI903 automatic titration systems. With a simple one-step connection from the titrator cable to the pump connector, the HI900100 is ready to use. This 40,000 step piston dosing pump operates with a low backlash screw drive to precisely deliver titrant or reagent into a sample. The dosing pump is able to support each of the four burette sizes Hanna offers: 5 mL, 10 mL, 25 mL, and 50 mL. With ±0.1% full burette volume accuracy, the HI900100 is fully capable of dosing extremely small volumes, ensuring high accuracy titration results.

CYCLOMIX� electronic dosing to handle several colors: CYCLOMIX� Multi can handle up to 7 different bases and 3 catalysts. Modular design CYCLOMIX� Multi can be positionned in zone 1 or 2 (Directive ATEX). The control cabinet must be installed in safe zone (ATEX Directive). Programming and use are user-friendly by means of a large touch screen. For acid catalyst it exists specific references for a CYCLOMIX� Multi PH.

We Offer Dosing Pumps. in Water Treatment, Chemicals like Chlorine, Alum, and Anti- Scalants are Required to Be Added in Precise Amounts. this Work is Carried Out By Dosing Pumps Which are Highly Accurate in Dosing Small Amounts of Any Liquid Chemicals as per the Flow Rate and Capacity of the Plants. as These Pumps are Digital in Make They Require to Be Set Only Once, and are Completely Maintenance Free. the Capacities of These Pumps Vary from a Mere 0.1 Ltrs. /hr. upto 500 Ltrs. /hr.

PLC based Metering Pump - Flow can be adjusted with the help of 4 - 20 mA signal. This pumps is very useful in remote, hazardous, toxic and flamable areas. It can be controlled from control room by using your control panel.A metering pump is a pump used to pump liquids at adjustable flow rates which are precise when averaged over time. Delivery of fluids in precise adjustable flow rates is sometimes called metering. The term "metering pump" is based on the application or use rather than the exact kind of pump used, although a couple types of pumps are far more suitable than most other types of pumps.Although metering pumps can pump water, they are often used to pump chemicals, solutions, or other liquids. Many metering pumps are rated to be able to pump into a high discharge pressure. They are typically made to meter at flow rates which are practically constant (when averaged over time) within a wide range of discharge (outlet) pressure. Manufacturers provide each of their models of metering pumps with a maximum discharge pressure rating against which each model is guaranteed to be able to pump against. An engineer, designer, or user should ensure that the pressure and temperature ratings and wetted pump materials are compatible for the application and the type of liquid being pumped

The metering pumps are positive displacement reciprocating pumps provided with stroke adjustment mechanism to vary flow of liquid as per requirement. Accuracy of flow is controllable within + 1%. Of the two parts of the pump, the Drive End mechanism is enclosed in a housing filled with oil to minimise wear and tear. The Liquid End, being of critical importance, is made of material suitable for the liquid to be pumped. These pumps are self lubricating type, capable of pumping fluids of any viscosity at constant pressure, irrespective of the suction pressure variations. Pumps for continuous flow are also designed and supplied by us as per your specification. Zion Enviro offers a range of dosing systems for precise dosing of chemicals for Raw Water Alum, PAC, FeCl3, Lime, Soda ash etc Polyelectrolyte Waste water Treatment Lime,FeSO4,Alum PAC etc Acids or Alkali Polyelectrolyte Antifoaming agents Reverse Osmonics plants Antiscalant Anti oxidant Biocide Cooling Water treatment Acid /Alkali dosing Bio dispersant Antiscalant & Corrosion Inhibitors Boiler Water treatment Scale Inhibitors pH boosters Corrosion Inhibitors

Type – Electronic Metering Pump   Features – Compact design| Minimal maintenance | Longer working life   Application – To ensure non-adherence of scale

DDA: This high-end pump range is designed for complex and demanding applications such as degassing liquids. Flow: Maximum 30 lph Head: 16 Bar Flow control with selective fault diagnosis Auto Flow Adapt DDC The DDC pump range is Optimum solution for common applications. Flow: Maximum 15 lph Head: 10 Bar Turn-down ratio 1:1000 Flow control with selective fault diagnosis Auto Flow Adapt DDE The DDE offers Digital dosing with basic functions even for a low budget for easier application Flow: Maximum 15 lph Head: Maximum 10 Bar Capacity Setting: 0.1 – 100% Smooth Continuous Dosing Simple Pulse Operation Mode       Features: Powerful Variable – speed stepper motor Internal Stroke speed cont Smooth Continuous dosing Optimal for degassing liquids Slowmode function for high-viscosity liquids

The chemical dosing systems used in the water treatment are made of quality products and are designed for perfection. The range of products that are available from Canadian Clear are best known for its longevity, sturdy design and optimum performance.The chemical dosing system used is a Electro-Mechanical Unit provided with Pump Chemical Tank and used extensively for dosing various chemicals at required rate into the raw water / sewage water for treatment.Anti Scalent Dosing System : Anti Scalent is dosed in recommended quantities on line by a automatic doser to prevent scale formation on the RO membrane and eliminate chemical fouling. Chlorine Dosing System Ferric Cholrine Dosing System Alum Dosing System Poly Electrolite ACID Ph Correction Dosing System SMBS Dosing System

We offer one of the finest engineered dosing systems manufactured with a mixture of materials such as carbon steel or stainless steel for base support frames, and pipe work in stainless steel or high alloys. These dosing systems are suitable for use in on and off shore industries including petrochemical, pharmaceutical, oil and gas, paper, food, nuclear power and bio-technology. Our range of HP dosing systems and LP dosing systems incorporate suction and discharge pipes which swiftly and safely deliver the chemicals to their destination and help our clients to reduce or prevent corrosion and deposition of the fluids being carried. These chemical dosing skids are manufactured to meet individual requirements and are both accurate and durable for all industrial applications. Product types include mixing, chemical dosing. Our chemical dosing skids can also be used in a range of applications where vessels, pipe work, valves, controls and filters among others combine. Key Features: • Meet international quality standards • Cost efficient and ensure the highest quality standards • Maximum dimensions per section • All products are fully welded and tested

With the aid of our sophisticated packaging system, our skilled personnel are able to meet the standard as well as customized packaging requirements of the clients. Moreover, we check the entire lot before dispatch. We have a good rapport with the leading names in the industry from whom we source the basic material, required for manufacturing superior grades products.   Features : Perfect functionality Optimum performance Long lasting service life   Price Range : Rs 15000 - Rs 150000

We are recognized as one of the staggering Chemical Dosing Systems Manufacturers in India. The materials used in the manufacturing of the High Pressure Chemical Dosing System are of optimum quality that ensures high durability, tensile strength and resistivity to adverse conditions. The same has made the Chemical Dosing Systems ideal for the storage of HCL, H2SO4 and NaOH. Moreover, Automatic Chemical Dosing System is also available in the array with automatic pH control system including unloading, transferring & controlling techniques.

We offer Auto and Manual Dosing Systems for dosing coagulants like Lime, Ferrous Sulphate, Polyelectrolyte, Alum and Acids etc. Dosing systems are compact and rugged, engineered to handle and work efficiently under highly corrosive and varying conditions.   The dosing of water treatment chemicals needs to be precise if effective control of water treatment parameters is to be achieved. We have considerable experience in the selection of suitable dosing equipment. Years of water treatment experience means we can advise our customers on chemical dosing and help our customers ensure that their water treatment regime is operating as efficiently as possible.

Our clients can avail from us a wide range of Dosing Pumps, as we are engaged in offering these products in small as well as huge bulk. These pumps are easy to install and can be operated conveniently. Highly advanced technologies and modern machines are used while manufacturing these products. These products are noiseless and needs low power consumption. Features: Easy operation Low maintenance Smooth finishing

Pneumatic Metering Pumps are operated by compressed air, nitrogen or natural gas. As there is no electrical component involved in these pumps, they are very safe to operate in hazardous areas. It is compact in size and easy to maintain. The pneumatically operated positive displacement metering pumps can provide accuracies upto +/-2% satisfying API-675 standards. Flow Turn Down Ratio : Since metering pumps offer both stroke rate and stroke length adjustment, flow turn down ratios as great as 100:1 can be achieved. Pressure : These pumps can produce 10,000psi with only 100psi of air/gas supply pressure owing to the large differences in area between the air/gas piston and the plunger. Corrosion resistance: Plungers made of SS316 or ceramic with PTFE seals provide maximum corrosion resistance. Special materials such as Hastolly are also offered.

Keeping in-line with the globally accepted standards, the raw material used for production is of high-grade. Thus, we always keep a check on the final product to make sure that the same is defect free. All those who are looking for a responsible name supplying Dosing Pumps can get in touch with us!

We are offering highly efficient Skid Mounted Chemical Dosing System which can be directly connected to the process system components required for smooth & efficient dosing. All the components are manufactured and listed before assembly under the supervision of qualified engineers. Tank (as per required capacity), motorized agitator, level gauge with protector, dissolving basket, dosing pump with motor, pulsation dampner, pressure gauge, pressure relief valve, non-return valve, strainer and piping constitutes to the major components of the Skid Mounted Chemical Dosing System. Our wide range of Skid Mounted Chemical Dosing System offers a perfect solution for all chemical dosing problems. Moreover, our Skid Mounted Chemical Dosing System is fabricated using superior quality raw material and possess following parts and features : Solution preparation tank-single or compartment Single or multiple chemical dosing pumps Stirrer (agitator) Valves, fittings Interconnecting piping Instruments such as pressure gauges Level gauges Level switches PRV Sensors VFD, etc.

Our company is renowned for providing highly efficient Water Pre Filtration System, which is designed as per the international norms & standards. Our Water Pre Filtration System can be easily installed at the site and requires low maintenance cost. The Water Pre Filtration System is widely used in various industries. Application : Industries