PIR Sensor Dealers

A NEGAVEEZ PIR occupancy sensor offers security and convenience in the areas that they cover. Occupancy sensor is an intelligent device which detects infrared rays emitted by human being and controls the on-off operation of electrical loads. Electrical loads can be lights, fans, Air conditioning units for energy saving application or siren, buzzer, feedback to home automation controller along with lights for security application. This highly sensitive sensor element detects human movement within its detection area and automatically turns the load on. The loads are kept on till the human movement persists in the room. The loads are turned off after preset time delay if no movement is detected within the set time it has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn on artificial light only when the ambient light condition (lUX level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient system along with security.   Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection DC 12 V/24 V versions are also available*** PIR Sensor: Highly Sensitive Quad Element Pyro Electric Sensor Time setting: Min 30 sec to Max 30 min to turn OFF loads after the last detected motion. Default time is 30sec. LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control on electrical loads during DAY Light, PARTIAL Light and NIGHT condition. Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load. For AC Control Use Additional Contactor of Suitable Rating. Sensor warm-up time: 1 Minute Sensing angle: 360 degrees Sensing distance: 4-5 Meters Operating Temperature : -10oC to 50oC Protection class: IP25 Enclosure is protected from environmental conditions that are water and dust. EMI protection: Protection against electromagnetic interference noise caused by cell phones, TV, tuners, audio players. Over Current/ Short Circuit Protection- 6.3Amps In built Protection circuit for lighting loads

We offer pir motion sensors for light with halogen lamp. The infrared induced lamp has an infrared detector with it. When the thermal body moving in the darkness the detector will light the lamp automatically and turn off after a period of time set in advance.

Wired Door & Window Sensor provides security alert when trespassed in armed state. We are counted among the reputed Suppliers of Wired Door & Window Sensor from Haryana, India. The Wired Door & Window Sensor that we offer sends alerts via SMS, IM chats, emails, ping on smartphones etc.

Specifications:   Rated Voltage: 230V AC 50Hz Load Wattage: Max.1500W incandescent bulb or Max. 300W fluorescent lamp Detection Area: Max. 5 Meters in radius Detection Angle: 360° around Time –delay: From 10 ± 5 seconds to 4 ± 1 minutes adjustable Protection Class: IP 20   Features:   Stand alone 220V AC operation Room Can switch light load of up to 300 Watts DetectionRange 5m in radius Lux Level Control & Time control Re-trigger Function Applications:   Offices / Conference Toilets Pantry Stores / Stairways Lifts / Lift Lobby Dining Area / Canteen Basement / Covered Parking Area Locker /Safe Room in banks/ Vaults ATMs - Colleges/ Schools/ Institutes Multi- Apartment Complexes Hospitals /Nursing Homes Malls And many more places…!

Compact 16 Zones. LED Display, Automatic Code Learning Technology, Home appliance switching facility. Built in Key Board, Alarm Time can be set, Built in Siren.All our systems have the facility to arm and disarm infrared separately. So you can arm the system but disarm infrared, if you think so, when you are within the homeofficeshop.

5 in 1 Stagnant Occupant Sensor, Bus Enabled, Energy Pilot, with Ultrasonic Cali ratable Distance sensor for occupancy, LUX, PIR, Security, and Energy Saving Distributed intelligence, for both automation and security use, (PIR Detection Angle = 110 Degrees, PIR Adjustable detection. Range 10 Meters diameter), (Ultrasonic Distance Adjustable 1-4 meters)

PIR Motion Sensor, which we offer, is a device that is used to switch on the lights connected with it whenever it senses motion of human body. This PIR Motion Sensor is very useful and energy saving device and can be used in Rooms , Stairs, Corridors, Galleries, etc., so when entering in the room, switch on the lights connected to it and while leaving the room it automatically switches of the lights. Details Ceiling Mounted, 500Watts incandescence load Capacity 300 Watt Fluorescent Load CapacityInstallation Height : 2.5 - 3.5 metersLux level adjustable by jumper setting as day mode, dusk mode and night mode - The unit can be Set to work only at day time / evening time to full night / at night time onlyVery attractive shape and compact sizeWhite ABS plastic bodyQuality sensor element (quad sensor element) Short circuit and supply surge protectionSupply notice filterImproved temperature compensationZero cross switchingRelay protection circuitCeiling / wall Mounting Option : Can be erected on ceiling or wallDetection range : 360 degree × 12 meterON time adjustable from 30 seconds to 20 minutesJumper settingDetection area adjustable by jumper setting as low, medium and high Manual mode : The unit can be set to remain ON for a period of 8 hours irrespective of any movement or ambient lux level – This features enable to use the unit in area like conference room etc.