Automatic Washing Machine Dealers in Ahmedabad

AUTOMATIC LINEAR VIAL WASHING MACHINE, MODEL: HVW-80/150&250  GMP Suitable for washing of Vials (2ml to 30ml) (dia. 14mm to 35mm) All Contact parts made out from SS 316 Entire frame covers & non contact parts made out from SS 304 Needles enter in to the container during washing cycle to meet cGMP requirement Low water consumption Quick change over of parts for other size of containers Complete flexibility with user for washing cycle Machine provides 4 water washes, 3 air washes and 1 silicon (Optional)   OPERATION Containers feed from the decartoning station (optional) are received on a unscrambler through Visual Inspection Unit (optional). An infeed worm inverts container as neck down position and feeds them through specially design indexing device. The devicecarry the container forward and stops. Nozzles carrier enters into the container and activates the jet of water/air.  The air/water flow is deactivated after  the washing cycle is over. Device get indexing for next wash. A separate pumping station (optional) gives the right quantum of water at the desired pressure. In the absence of separate pumping station we can provide the recirculation & siliconising system on request. Washed container are again inverted to neck upward position to collect in trays/directly feed to tunnel.

Automatic External Vial Washing Machine is designed to wash the outer surface of round shaped Vials. Machine washes the outer sides of Vials and eliminates the particles that are formed on the vials, which are previously filled and sealed.   Salient Features Complete cGMP model Suitable for vial sizes from 5ml to 100ml without any change parts (No change parts required) No Vial – No Washing” system eliminates wastage of water & air Easy cleaning & maintaining Machine is equipped with PLC system. Stops supply of water & air when acrylic doors opened during operation. Indication & alarm in PLC. Normal water required for washing & no hot water required When there is no vial on conveyor, it stops the water & air supply. Infeed & outfeed Turn Tables. Imported Gear motor for main drive, unscrarnbler and scrambler Variable A.C frequency drive for main drive, unscrambler and scrambler Acrylic cabinet for machine.   Process Operation Form the in feed Turn Table the vials are fed into the External the Vial Washing Machine conveyors. The machine consists of two conveyors on which the vials are properly fed and transported from in feed Turn table for the washing operation. Two Operations are carried out on this machine. First the vials are washed by water jet and then dried by air jet. On the conveyor a set of spray nozzles are fitted on each on each conveyor for water Jet. One set of knife blocks are provided on each conveyor for air. The air sprayed through this knifes . The knifes are fitted in a inclined manner which ensures that is sprayed reaches each corner of the vial which are previously washer. After washing and drying the vials are guided to the out feed turn Table. Before reaching the out feed Turn Table a special arrangement is provided to dry the vial from the bottom side . A set of Syringes are provided on the sides of each conveyor at the exit end which sprays the air jet on the bottom part of vial resulting in the drying of the vials This machine is completely operated by PLC . A covering of Acrylic cabinet is provided in the machine which when opened up during the operation immediately stops the supply of water &air and shows the indication which alarm in the PLC.

We are offering automatic external filled vial washing machine. Complete cgmp construction & design can handle vial sizes from 5 ml (ø 25mm) to 100 ml (ø 54mm) with only change part of vial separators for proper positive feeding with required intervals 'no vial no washing' & 'no vial no air' system eliminates wastage of water & air. Machine is equipped with plc system. Has polycarbonate guards on machine. Machine stops if water in storage tanks's level goes below minimum & there is no inflow triggering alarms. Machine stops if the compressed air pressure drops below the set pressure and triggers alarms. Machine stops if any toppled vial inserts the track of the machine

We are supported by a well-managed and automated warehouse system wherein we store the entire lot in a secured manner. The automatic handling, storage and distribution of the goods thus become an ease. With stern quality examinations on varied stages of deigning and manufacturing, even the raw inputs used are completely examined by the professionals. This helps us in delivering the finest array of products with complete precision. Our Robotic Touchless Car Wash System uses robotic arms for high quality cleaning, uses high pressure water wash to clean dirty car, which is robust and easy to operate wash system.

As one of the pioneering manufacturers of Semi automatic multijet ampoule and vial washing machine, Harsiddh Engineering Co. offers products of highest quality standards. The S.S construction provides lucid operation while washing ampoules of 1ml to 25ml. additionally; the washing equipment also meets the washing demands of 2ml to 100ml vials. Microprocessor incorporation enhances the functioning of the entire unit.   The washing apparatus possesses incredible technical specifications. The needle quantity of the machine is classified in 30 cycles in every hour. With a power consumption capacity of 0.25HP, this particular equipment consumes very less power. The entire machinery works on the pressure cleaning mechanism and makes very less use of the washing media. Operators can also view the entire washing process with the acrylic cover placed on the top of this ampoule washing device. By using distilled water, this device ensures perfect cleaning for all kinds of vials and ampoules. Apart from that, the machine also offers lucid operation by loading 30 trays within an hour. Our machines have CE certifications.   Automatic re-start and stop process during the cyclic operation further enhances your convenience while washing. Additionally, all the contact parts of the equipment exhibit S.S 316 or HDPE polycarbonate materials, thus imparting robust strength. Silent Features Machine is suitable for washing of 2ml to 100ml vials. High pressure spray nozzles enter into the vials & ensure perfect wash. Totally fabricated from high quality SS materials including the basic frame. No change of parts required for washing of vials (5ml to 30ml), hence saving time of change over. All parts coming in contact with washing zones / jets are made from SS 316 material. Water re-cycling arrangement is possible as per customer’s requirement. Machine is totally robust and withstand continuos operation for long working hours without any trouble. Multijet ampoule and vial washing machine is equipped with PLC system & printing facility with passwords.  

We are offering automatic external vial washing & drying machine. Model no. nkew - 100 nkew - 200 direction left to right left to right production rate up to 100 vialsmin. (for 5 ml vial) up to 200 vialsmin. (for 5 ml vial) electrical supply 5.0 hp 5.0 hp power requirement 415 volts, 3 phase (4 wire system), 50 hz 415 volts, 3 phase (4 wire system), 50 hz height of conveyor 900 mm (approx) 900 mm (approx.) dimensions 3400 mm (l) x 915 mm (w) x 1400 mm (h) 3470 mm (l) x 980 mm (w) x 1400 mm (h)

The bottles are loaded on rotating platform where bottles are getting cleaned in a series of operations. The bottle holder i.e. nylon cups are specially designed to accommodate bottles with varying neck diameter and bottle diameter. The bottles are placed in an inverted position in cups. The external cleaning of the bottles is done by spraying showers. Solenoid valves are provided to enable the regulation of timings and sequence of various washing media to suit specific requirement.   Salient Features: The specially designed cups are provided on the platform to accommodate any size of Bottle from 100 to 1000 ml. Easy loading and unloading with two rows. Individual solenoid valve for each washing sequence Pumps and tanks are mounted on parable stand for easy maintenance – Compact GMP model. – Geneva mechanism. Four internal, one external and one air wash Washing Sequences and positioning of washing stations can be interchanged as required for liquid oral &injectable. Stationary nozzles eliminate contamination of water cycles.

The Automatic Linear Tunnel type Vial Washing Machines Model VIALWASH-240 is suitable for Round Vials sizes of appx. 5 ml to 30 ml pack size with maximum speed of 240 Vials per minute, Specially designed machine also available for 2 ml Vial Size. Machine construction is in Stainless Steel finish including frame structure. All parts coming in contact with Washing Zone and Jets are made from SS-316 Materials. Intermittent handling of Vials ensures the maximum time for washing and also saves the Water through No Container - No Water system. Machine also offers various customized options for washing sequence as per customers requirements. Washing process takes place with Five different Washing Zones each with 10 nozzles for optimum washing. Machine also equipped with external washing of Bottles.

The External Vial Washing Machine is designed to wash the outer surface of round shaped Vials [5ml to 100ml Vials]. This machine washes the outer sides of Vials and eliminates the particles that are formed on the vials, which are previously filled and sealed.   From the infeed Turn Table the vials are fed into the External Vial Washing Machine conveyors. The machine consists of two conveyors on which the vials are properly fed and transported from in feed Turn Table for the washing operation. Two operations are carried out on this machine. First the vials are washed by water jet and then dried by air jet. On the sides of the conveyor a set of spray nozzles are fitted on each conveyor for water jet. One set of knifes blocks are provided on each conveyor for air jet The air is sprayed through this knifes. The Knifes are fitted in a inclined manner which ensures that the air that is sprayed reaches each corner of the vial which are previously washed. After washing and drying the vials are guided to the outfeed Turn Table. Before reaching the outfeed Turn Table a special arrangement is provided to dry the vial from the bottom side. A set of syringes are provided on the sides of each conveyor at the exit end which sprays the air jet on the bottom part of the vial resulting in the drying of the vials This machine is completely operated by PLC. A covering of Acrylic cabinet is provided in the machine which when opened up during the operation immediately stops the supply of water & air and shows the indication with alarm in the PLC

Automatic Linear Bottle Washing Machine is used for washing of bottles. Bottles will be pushed from in feed tray and then move on wire woven conveyor belt, which align the Bottle in correct position, to enter in to the carrier pocket with help of oscillating guide rails. Oscillating arm deliver the Bottle inside pocket in mouth down position over spraying nozzles. Multi jet sprayers fixed at the top cause the total external and internal surface to be washed. To avoid any possible cross contamination between two different waters. Each washing station is provided with an independent circuit. Carrier pocket is moving with indexing motion. When the baskets have completed their motion the needles are lifted. They penetrate the bottle, spraying jets of water or compressed air then return down. The baskets movement then advances by one station. Each station of bottle passes through the washing cycles selected

Shree Bhagwati very critically reviewed vial washing operations in the parenteral section and found methods either very primitive or concepts with probabilities or too perfect and highly expensive. Considering above facts, a very imaginative vial washing machine Model SBVW-150 is devised to ensure simple & modular operation, where each individual vial is positively washed with maximum of seven washes. Operation: The Vial trays are directly un-loaded to the vial tray from which it is pushed on to the turn-table. The turn-table slowly and steadily feed vials to the two tracks feed worm, where vials are automatically inverted. The synchronized star-wheel places two vials, one by one to the two tracks indexing chain. The indexing chain positively carries inverted pair of vials through seven sequential washes. At the end of washing operations vials are reinvented back into original position and collected in the tray.   Salient Features Very compact, rigid, & modular construction. All contact parts with D.M. water and distilled water of S.S. 316 construction and argon arc welded. The unit built on S.S. square pipe frame and totally encompassed with S.S. coverings in pleasing matte finish to avoid corrosion and ease of cleaning even from inside. The washing section is totally covered with acrylic cabinet and collecting trays ensure total removal of water in the drain or recirculation tank Absolutely simple machine, with only six change parts, which can be changed within few minutes. All exposed parts are of S.S. 304 or hard chrome plated brass for corrosion free long life. The seven sets of nozzle enter into the vials mouth during the washing operation ensuring penetration of washing medias to the core A perfect washing principle. Fixed top nozzles at each washing station ensures external washing of vials at the same time of internal washing. The flow of washing medias stop during the indexing of chain, saving straight 25% on utilities. The system of solenoid valves and optional tanks, pumps and filters is engineered for long trouble free life & fool proof operation. The machine construction allows delivery of vials into a separate room or attach directly with tunnel.

Completely CGMP Model. Simple structure, Stable function, Easy operation and Virtually low maintenance cost. Very Compact & modular construction suitable for handling wash of 60ml to 250ml Bottles (without any change parts). Machine also suitable for different size of bottles up to 3 Litter Bottles. Machine is fitted with two emergency switches i.e one at out feed and other at infeed. Totally fabricated from SS materials with basic frame (cGMP Model). All parts coming in contact with washing zone are made from SS materials Machine equipped with safety devices to ensure smooth and silent operation with HIGH rated output. Machine totally rigid and withstands continuous operation for long working hours without any trouble. Washing chamber having various spray zones. The machine will be provided with SS pumps and SS tanks

KEY FEATURES : Geneva Mechanism. Four inner (Included one air wash) & one outer. Sequence of washes to customer's choice. Easy operation. Stationary nozzles eliminate contamination of water cycles. Easy loading and unloading. Individual solenoid valve for each washing sequence that eliminates carbon plate and other accessories reduces leakage and maintenance to minimum. Higher capacity centrifugal pumps to wash bigger bottles (500 & 1000 ml.). The stationary nozzles avoid chipping of bottle necks. Pumps and tanks are mounted on portable stand for easy maintenance. Bottle guide system especially for lightweight bottle. Pumps and Tanks are mounted on portable stand for easy maintenance. Separate panel control to avoid any short circuit due to spraying of water. S.S. glycerin fill pressure meter.

Description:"GMP" High Speed Linear Vial Washing Machine is most ideal for Round Vial and finds wide application in PHARMACEUTICALS INDUSTRIES. The automatic loading arrangement facilities loading of vials on to SS wire mesh conveyor through feed conveyor or vials are pushed manually from feed table. This saves manpower as vials are feed into pockets automatically. The automatic unloading mechanism consists of unloading vial continues on to turn table (Optional)   Three-cycle rinsing allows flexibilities of various wash cycles such as fresh water, dematerialized water etc. as per the rinsing requirement of bottle. All the pumps are made of SS and all the water contact parts are made of SS 316 on a heavy base of SS structure.In tunnel design is such that separation is maintained between feeding zone and discharge zone of the cleaned containers. All the mechanical drives are separated and isolated from the washing zone. Approved materials only are used for construction, together with a careful choice of components, thereby taking in to consideration all aspects of sanitation and consequence complying with the pharmaceutical G.M.P. requirements.The quality of rinsing is ensured through 3 sets of inner and 2 sets of outer nozzles accurately placed to direct the jet at center of the bottle and the bottle comes out with water totally drained with minimum droplets of water.   • High-pressure spray nozzles ensure perfect wash of Bottles. • Interchangeable wash sequences. • Totally fabricated from SS Materials, including the basic frame. • No change parts required for washing of round bottle saving time of change over. (Change Parts require forFlat bottles & if change of neck size.)   • All parts coming in contact with washing zones / jet are made from SS 316 materials. • The machine suitable for handling washes of round and flat glass bottle (With help of change parts). • Water re-cycling arrangement is possible as per customer’s need. • Machine is totally rigid and with stands continuous operation for long working. Hours without any trouble. • Higher capacity centrifugal pump to wash bigger container. • Third Tank & pump can be fitted (optional).

DESCRIPTION   Harsiddh semi-automatic rotary bottle washing machine is designed very compact on vibration free platform for easy operation. We are a leading manufacturer and supplier of wide array of bottle washing machines, which follow GMP norms and used in bottle cleaning process. The bottle washer is made from stainless steel 304 to define rotary platform, flow regulators, bottle holder cups, solenoid valve, pressure meter and specifically designed with Geneva mechanism.   Rotary Bottle Washing Machine held specific loading and unloading for easy operation. The panel control system is given separately to avoid electrical disturbances. Stationary nozzles are used to prevent any sort of contamination. The machine can be used for four inner and one outer wash. Our machines have been introduced after in depth research to ensure the containers aseptic and sterilized before filling. Our rotary bottle washers are CE certified.   SALIENT FEATURES  Geneva mechanism. Four inner, one outer and one air wash. Sequence of washes of washes to customer’s choice. Stationary nozzles eliminate contamination of water cycles. Easy loading and unloading with two rows. Individual solenoid valve for each washing sequence. Pumps and tanks are mounted on parable stand for easy maintenance. TECHNICAL SPECIFICATION Production Rate 60 to 100 Containers/Min. Input Specification Container Dia.: 25mm to 100mmContainer Height: Up to 280mm Power Specification 1 H.P., 3 Phase, 4 Wire System, 50 Hz Optional Accessories 2 Pumps – Pumping StationElectric Heater Tank Utility Fresh Water: 900 Liters/HourDM Water 300 Liters/ HoursAir 30 CFM @ 5 bar (5 Wash) Overall Dimension 1550 mm (L) X 1700 mm (W) X 1300 mm (H) Net Weight: 750 Kgs. Gross Weight: 1000 Kgs.