Bottling Plant Dealers in Vatva, Ahmedabad

• Model No.: AIALF-40 / AIALF-80 / AIALF-120
• Brand Name: ASHIRVAD
• Filling Head: 4/6/8
• Machine Direction: Left to Right.
• Machine Dimension: 2440 mm (L) X 1220 mm (W) X 1450 mm (H).
• Production Speed: 20 to 60 Bottles / Minute. (Depend on Machine Model)
• Power Characteristics: 230 Volts/Single Phase/50 Hz./ 1440 RPM (Four Wire System)
• Machine filling range: 50 ml. to 1000 ml.
• Filling Accuracy: + 1% in single dose.
• Bottle Diameter: Up to 90 mm.
• Motor: Servo Motor
• PLC and HMI: Delta Make

• Output / Speed: 60 BPW
• Power Required: 3-5 HP, 440 V, 3 Phase, 50Hz.

linear bottle washing machine application & process : high speed linear bottle washing machine is most ideal for round bottles and finds wide application in pharma, food & beverages industries. The automatic loading arrangement facilities loading of bottles on to ss wire mesh conveyor through feed conveyor or bottles are pushed manually from feed table. This saves manpower as bottles are feed into pockets automatically. The automatic unloading mechanism consists of unloading bottle continues on to turn table (optional). three-cycle rinsing allows flexibilities of various wash cycles such as fresh water, dematerialized water etc. As per the rinsing requirement of bottle. All the pumps are made of ss and all the water contact parts are made of ss 316 on a heavy base of ss structure. In tunnel design is such that separation is maintained between feeding zone and discharge zone of the cleaned containers. All the mechanical drives are separated and isolated from the washing zone. Approved materials only are used for construction, together with a careful choice of components, thereby taking in to consideration all aspects of sanitation and consequence complying with the pharmaceutical g.m.p. Requirements. salient features : designed as per cgmp - current good manufacturing practices compliance machine is made from aisi 304. all parts coming in contact with washing zones / jet are made from ss 316 materials. simple structure, stable function, easy operation and low maintenance cost. very compact, rigid & modular construction meeting cgmp norms. the machine is suitable for wash of 60 ml to 250 ml round bottles without any change parts. change parts require for flat bottles & if change of neck size. washing chamber having various spray zones. high-pressure spray nozzles ensure perfect wash of bottles. interchangeable wash sequences. water re-cycling arrangement is possible as per customer's need. machine is totally rigid and sturdy for continuous trouble free operation for long working hours. higher capacity centrifugal pump to wash bigger container. variable speed drives.

Automatic volumatric vial bottles filling machine is working on the volumetric principle. The machine consists of diving nozzles. The machine is made up of stainless steel matt finish body. It is compact and versatile.   HOW IT IS SIMPLE AND QUICK : There is a twin pneumatically operated stopper system with feed below and filling nozzles. The conveyor belt moves the container to the filling nozzles. The reciprocating nozzles and stopper system can match for centering of the container below nozzles, to avoid the wastage of the liquid. The nozzle goes upwards from the bottom level to minimize the foaming. The fill size can easily set with a hexagonal bolt, below the syringe.      THE FEATURES : Very much accurate, ±1% filling accuracy. Vibration free construction Error code display The platform is provided with drain tray round it, and drip tray under the conveyor  The perfect pneumatic arrangement for bottle stopping The conveyor gear box, motor and pneumatic cylinders are provided with the safety guard. To prevent from the short circuit and over load, the MCB is given. For the voltage fluctuation and short circuit in A/C frequency drive there is inbuilt protection, with machine No bottle no filing system Trouble free performance with low maintenance Easy control panel Low friction wear surface, smooth and noiseless conveying.  It takes minimum time to change the apparatus The bottle height gauge is adjustable for the quick and easy setting The height of the conveyor belt is adjustable to align with other machine of the line No container no cap arrangement The single A/C drive is synchronizing the platform turret and capping bowl, conveyor and star wheel. The conveyor, star wheel and platform turret is synchronized by the single motor. The S.S. matt finished body S.S. cladding or hard chrome plating of all exposed parts. The UHMW-PE guide profile for low friction wears surface. It is self lubricating leads smooth and noiseless conveying. Depending on the gauges and size of caps, the sealing pressure can varied Noise level and power consumption are very low       SPECIAL FEATURES : The washing system of automatic chain for the conveyor belt There is afloat tank( holding tank) with or without stirrer In-built pre-inspection Nitrogen flushing Acrylic cabinet The cover of the conveyor is of acrylic   UTILITY REQUIREMENT : Electrical Supply : Three Phase + Neutral + EarthingElectrical Load : 2 KWAir Pressure : 6 bar pressure 0.5 CFM

We are delivering a premium quality range of High Speed Linear Bottle Washing Machine to our highly valued clients. These are highly admired for their accurate dimensions and varied application specific designs. Our machines efficiently eradicate germs & dirt from the bottles and operate on the rotary principle. We are able to give all type of different application. The machine can modified as per client requirement.We are known for our best service and quality managment. The machine technical detail is as below. We give more information on your request...... Machine Model: CPTLW - 120 (Tunnel Type) Vial:Min. 5 ml to Max. 30 ml. Output:120 Power Require:5 HP, 440 volts, 3 phase Net Weight :1250 Kg. Apx. Gross Weight:1450 Kg. Apx. Machine Model: CPTLW - 240 (Tunnel Type) Vial:Min. 5 ml to Max. 30 ml. Output:240 Power Require:5 HP, 440 volts, 3 phase Net Weight :1500 Kg. Apx. Gross Weight:17000 Kg. Apx.

Construction of S.S. matt finished body This is basically a inspection conveyor widely used for inspection empty bottles Special glass helps to show bottle in big size after washing of bottle to find out if any particles or dust or water is still there. Machine is synchronized with filling machine Vibration Free, Jerk Free, Noise less construction with the help

• Type: Volumetric Liquid Filling Machine
• Certification: ISO 9001:2008 Certified
• Application: Liquid Filling
• Weight: 100-1000kg
• Color: Metal Finish
• Voltage: 220V,380V,440V

volumetric liquid filling machine is compact, versatile and enclosed in elegantly matt finish body. this machine provides maximum output up to 200 bottles per min. this machine model is used in pharmaceutical, food, dairy, chemical, cosmetic and beverages industry.the speed of bottle filling machines depends on nature of liquids, container diameter, container height, container neck size and filling volume. machine construction in fully stainless-steel finish including machine frame structure as per cgmp guidelines. machine with optional turn tables at in-feed and out-feed with individual drives to match the speed of incoming and outgoing bottles for smoother operation. all contact parts of machine model are stainless steel 316 only.   special features: flow meter for high fill accuracy and repeatability built in plc with color touch screen operation tri-clover joint for easy maintenance no bottle - no fill system, no bottle - machine stop system all contact parts made of ss 316 material with easy removal system machine construction in ss 304 material diving nozzle for foam free filling very high fill accuracy of ± 1 to 1.5 ml for any fill volume up to 250 ml and ± 2 ml above 250 ml pack size. machine also available with option of high fill accuracy of ± 0.5 to 1 ml. suitable for syrup and suspension having higher viscosity. automatic infeed and exit of bottles minimum change over time unique free spinning bottle separator- no pneumatic operation built-in a.c. variable freq. drive system.

We offer a wide range of Inspection Machine available in varying length of 5 & 10 feet. With output capacity of up to 150 – 250 containers per minute, our inspection machine is widely used in the pharmaceutical industry for carrying out the inspection process on various tablets/capsules.   The Inspection Table is basically Quality Control Unit provided for visual inspection of filled and sealed bottles before the labelling operation. By the visual inspection the emphasis is on checking the following aspects, depending on individual’s requirements. a) Foreign Particles In case of transparent liquids only.b) Damaged seals on the bottle.c) Cracked bottles.d) Large volume variations. An S.S. belt provided on the center of the table brings in the bottles, which automatically bifurcates the path of bottles in two channels for two operators sitting on opposite sides. There is sufficient space provided for collection of bottles for inspection. The inspected bottles are kept back on moving belt in the center and these are further transported to the labeling machine.Main drive 0.5 H.P. motor 440 volts.

• Voltage: 230V (50/60Hz) 1 phase
• Power: 4 KW for fully auto machine
• Machine Weight: 500K.G. (Approx.)
• Cylinder Make: jenetics
• Timer: select and snaider sensor
• Sealing: hot bar with mushroom bled

We as a manufacturer, supplier and exporter of the Grouping machine provide comprehensive solution correlated with the packaging machinery, packaging tools and packaging materials bring forth highly efficient and continuous operation packing equipment configured by considering the thermal shrinkage property of the packaging film. Our water bottle packing machine is a good example of the implementation of advanced technology, which complies with all international standards. The machine is fully automatic in which array, aggregate and alignment of the bottles is achieved by automatic operation. In the water bottle packing machine bottles are counted by lines and rows as a preset, packed with the film and at last pass through heating tunnel where thermal shirking take place by heating, cooling and forming. The long term experience in the packaging domain enables us to produce the advanced technology based water bottle packing machine equipped with third generation sealing cutter which ensures even and longer life sealing. Furthermore adopting air circulation technology, we ensure heat insulation, high accuracy for controlling temperature and absolute packaging. The whole process of the bottle packaging machine is automatic, but to meet the requirement and budget, we offer a customization option and deliver the machine as per the customer’s specification at the leading industry rate.    Core Features of Water Bottle Packing Machine: High speed perfect finishing low maintenance sturdy construction   Note: We as a packaging machine manufacturer, supplier and exporter from India accept specifications from you, if any, and manufacture Water Bottle Packing Machine with your preferences at the best possible price as well as assist to determine the best machine for your application and budget.

• Brand Name: Prism
• Machine Type: Automatic
• Material: Stainless Steel
• Features: Designed as per cGMP - Current Good Manufacturing Practices compliance,A machine structure is made from AISI 304 with matt finish.High-speed visual inspection with high output.Length can make as per customer requirement.PVC black & white board as per GMP

• Automatic Grade: Automatic
• Warranty: 1 Year
• Driven Type: Electric
• Voltage: 220 V
• Material: Stainless Steel
• Usage/Application: Bottle Washing
• Phase: Single Phase

• Material: STAINLESS STEEL
• Brand Name: MULTIPACK
• Capacity: 20-28 BPM
• Machine Capacity: 20-28BPM
• Machine Type: Automatic
• Automation Grade: Automatic
• I deal in: New Only

• Main Motor: 0.5 HP / 415 Volts / 50 Hz
• Pump Two Nos.: 0.5 HP x 2 = 1 HP / 415 Volts / 50 Hz
• Electrical Heater: 3 Kw.

The Rotary Bottle Washing Machine is compact and highly efficient machine with elegant look. This multifunctional multi featured machine meets the GMP requirements of washing for glass and plastic bottles. The machine operates on the rotary principle with "GENEVA" mechanism and requires manual loading and unloading of bottles.

• Suitable for :: 30ml to 200ml Bottles,
• Bottle Size :: 32mm to 60mm Diameter and 38mm to 180mm Height*
• Washing type :: Linear Continues Motion with Stationery Drive
• Air Consumption :: 12 to 15 CFM
• Water Consumption :: 450 to 600 Litre per hour for each washing zone (depending on bottle size)
• Washing Zone:: Five zone can be set as per required sequence
• Pumps and Water Tank :: 2nos. Each 6000 Ltr. Per our capacity Centrifugal Pump and 50 Ltrs. Tank
• Compressed Air :: 30 CFM
• Electrical :: 415 VAC 3 Phase 50Hz and 220 VAC Single Phase Power Supply (50/60 Hz)
• Power :: 4.0 H.P.
• Speed :: Max. 120 Bottles per minute depending on Bottle Size
• Conveyor Height :: 815-940 mm
• Overall Dimensions :: 2700 mm (L) x 1400 mm (W) x 1550mm (H)

• Electric Heater Tank: 3 KW
• Total Load: 5 KW
• Dimensions: 1550 mm L X 1700 mm W X 1300 mm H

Geneva mechanism. Four inner, one outer and one air wash Sequence of washes of washes to customers choice With 96 Pocket for bottle holding Output :64 to 100 bottles per minute, Easy operation. Stationary nozzles eliminate contamination of water cycles. Easy loading and unloading with two rows. Individual solenoid valve for each washing sequence, which eliminates carbon plate and other accessories, reduces leakage and maintenance to minium. Higher capacity centrifugal pumps to was bigger bottles (500 & ml) The stationery nozzles avoid chipping of bottle necks. Pumps and tanks are mounted on portable stand for easy maintenance. Bottle guide system especially for light weight bottle.

We are one the leading manufacturers and suppliers of Bottle Washing Machine from Ahmedabad. Our manufactured Bottle Washing Machines has three water washes and two air washes for the perfect washing of bottles. These are suitable to wash glass bottles and pet bottles with the minimum use of labor and time. It is also known as Bottle Washer. These machines are designed for high outputs and for cleaning very dirty bottles with labels and foils. These machines are fabricated using excellent quality raw materials and latest technology.   This Bottle Washer has 3 to 4 multisoak tanks for soaking the bottles thoroughly as well as spraying inside, outside with high pressure sprays. The movements of the main carrier chain in these machines are continuous, giving high spraying and soaking times. Bottle Washing Machines that are offered by our company are widely used by a number of industries for fast and efficient washing, sterilizing and drying of bottles before being filled with solutions, liquids or powders. These machines are manufactured at our state-of-the-art manufacturing unit using world class raw materials and cutting edge technology in compliance with predefined industry standards. Our offered Bottle Washing Machines are known for their easy installation, robust construction, corrosion resistant nature and longer functional life. These machines are strictly tested on various quality parameters to meet the defined industry standards.     Process Operation   The bottles are loaded on the subsequent indexing part of rotating platform and are cleared in series of operations. A number of trays are provided in this machine. These trays are light weighted and designed such that bottles need not be kept one by one. These trays are directly overturned on to plastic crates containing the bottles. The bottles seat on PVC cups on the trays and the plastic crates are then removed. Specially designed bottle holders are provided to hold the bottles with their neck diameter. The bottles are placed in an inverted position in these cup shaped holders. A Hydraulic system pushes the trays into the machine at set intervals. The machine consists of various compartments for different washes. The first section is the hot waterCaustic Soda wash. Spraying showers does the external cleaning of the bottles. The Solenoid valves are provided to enable the regulation of wash timings, it also spraying water when bottle are stopped means ensure saving of water and sequence of various washing media to suit specific requirement. In the second, third and fourth sections the bottles are washed in plain water. If required, more sections can be added in this bottle washing process. Each section has its own monobloc set that pump the water in a high-speed jet. TheRinser nozzles are kept below the bottles as well as above the bottles. In each section two trays consisting of 24 bottles are washed at once. The rinsed water falls into a stainless steel tank below and is recycled by the pump. A fine mesh of stainless steel is kept above the tanks and all dirt and dust is collected. The meshes can be easily removed and cleaned at regular intervals.   Salient Features of Bottle Washing Machine     Geneva mechanism. Multiple soak tanks. Effective performance. 100% condensate recovery system. Automatic loading and unloading system. Easy loading and unloading with two rows. Bottle guide system especially for lightweight bottle. Continuous drive system with multiple gear drive chain. Four internal, one external and one air wash with shower. Stationary nozzles eliminate contamination of water cycles. Pumps and tanks are mounted on parable stand for easy maintenance. Fully automatic electrical panel and operator panel with digital readouts. Separate panel control to avoid any short circuit due to spraying of water. Higher capacity centrifugal pumps to wash bigger bottles (500 and 1000 ml.). Individual solenoid valve for each washing sequence that eliminates carbon plate and other accessories reduces leakage.  

• Filling Accuracy: ±1 %
• Machine height: 1700mm

utomatic Volumetric High Speed Six Head Bottle Liquid Filling Machine, Mode No: ALFT – 151. The machine consist of S.S. slat conveyor belt, reciprocating filling nozzle with self centering devices, S.S. – 316 Syringes, Silicon rubber tubings, easy –reach compact panel and with no container no filling system etc. It is compact, versatile. The un-scrambler has been designed in the machine to eliminate dead ends and difficult to clean spot. All its exposed parts are made of S.S. – 304. It is provided with co-eccentric nozzles, which allow quick and precise setting. Its height can be adjusted to match other machines for efficient synchronization.

We are offering automatic volumetric liquid bottle filling machine. Description automatic volumetric liquid bottle filling machine work on volumetric principle with diving nozzles. The unit is made compact,versatile and enclosed in stainless steel elegantly matt finish body, of s.s slat conveyor, reciprocating nozzle with self-centering devices & ss syringe. No container no filling system arrangement is standard feature of the machine. The main drive of the machine and conveyor drive consist of ac motor with synchronized variable ac frequency drive. Operation containers moving on s.s. Slat conveyor, feed below the filling nozzles through a settable twin pneumatically operated stopper system.the twin pneumatically operated stopper system and reciprocating nozzles can precisely match for centering of container below nozzles, to avoid spillage of liquid on container. To minimize foaming adjustable nozzle will reciprocate according to filling dose, nozzle will go upwards slowly from bottom level of bottle towards neck during filling.

With intention the best quality of Mineral Water, we design and install turnkey system of Mineral Water Plants incorporating the equipments & components. We offer a single convenient source for all system accessories, including pre treatment, filtration and disinfection of water. Reverse Osmosis Pretreatment Reverse Osmosis Plant RO Treated water Storage Tank UV disinfectant with Micron Cartridge Filter Tank for Ozonation Ozonator Capacity 1000 LPH to 50,000 LPH In single and multiple streams Roduce high quality mineral water Reverse Osmosis Pretreatment available in SS/FRP TDS rejection up to 95-99% High efficient UV disinfectant and Ozonation for best quality of Mineral Water Low operation and maintenance cost

Commercial Mineral Water Plant, which we offer, is the best since it is used for processing water for various industrial processes. Also, our workforce renders assistance in designing, production and packaging of mineral water to Mineral Water Units. Also, we have gained immense expertise in manufacturing Commercial Mineral Water Plants as per the requirements of the clients. We have developed some packages for the clients, which can be picked as per their needs. These packages are provided in the form of modules that can be upgraded later. Used For Processing Mineral waterJuicesSoft drinksBeer

FEATURES: Available in 2 or 4 head models filling range from 5ml to 1500ml.(with the help of different syringes) machine body is constructed in MS and covered by SS sheet. Accurate and continuous filling of all type of free flowing liquid in any shape of container. Filling speed 300 to 1500 fills/ Hr. (Depending on Volume / Viscosity of the Liquid be Filled) Provided with non return valves and HDPE piston rings.

With intention the best quality of Mineral Water, we design and install turnkey system of Mineral Water Plants incorporating the equipments & components. We offer a single convenient source for all system accessories, including pre treatment, filtration and disinfection of water. ·         Capacity 1000 LPH to 50,000 LPH In single and multiple streams ·         Produce high quality mineral water ·         Reverse Osmosis Pretreatment available in SS/FRP ·         TDS rejection up to 95-99% ·         High efficient UV disinfectant and Ozonation for best quality of Mineral Water  ·         Low operation and maintenance cost

The “N.K.INDUSTRIES” Rotary bottle washing machine is compact is and highly efficient GMP requirement of washing for glass and plastic bottles. The machine operated on the Rotary principle with GENEVA mechanism and requires manual loading and unloading of bottles.

• Material: Stainless Steel
• Country of Origin: Made in India
• Usage/Application: Industrial
• Machine Type: Automatic

• Suitable for :: 30ml to 200ml Bottles
• Bottle Size :: 32mm to 60mm Diameter and 38mm to 180mm Height*
• Washing type :: Linear Continues Motion with Stationery Drive
• Air Consumption :: 12 to 15 CFM
• Water Consumption :: 450 to 600 Litre per hour for each washing zone (depending on bottle size)
• Washing Zone:: Five zone can be set as per required sequence
• Pumps and Water Tank :: 2nos. Each 6000 Ltr. Per our capacity Centrifugal Pump and 50 Ltrs. Tank
• Compressed Air :: 30 CFM
• Electrical :: 415 VAC 3 Phase 50Hz and 220 VAC Single Phase Power Supply (50/60 Hz)
• Power :: 4.0 H.P.
• Speed :: Max. 120 Bottles per minute depending on Bottle Size
• Conveyor Height :: 815-940 mm
• Overall Dimensions :: 2700 mm (L) x 1400 mm (W) x 1550mm (H)

We offer a wide range of Bottle Inspection Machine available in varying length and output capacities, our inspection machine is widely used in the packaging, cosmetics and pharmaceutical industry for carrying out the inspection process in various medicines. Technical specifications No Change Parts required for change over of each vial sizeVery easy to operateLess Maintenance requiredLess voltage consumption Properties DurableCan inspect large amountsCorrosion resistantTensile strength abrasion resistant