Colloid Mill Machine
50,000 - 5,000,000 Per Piece
1 Piece (MOQ)
Material : Stainless Steel
Power : 5 HP
Voltage : 415 V
Phase : Three Phase
Country of Origin : Made in India
Brand Name : Crown Pharma Machinery
Hopper Capacity : 15 L
Output : 1200 L
Particle Size Reduction : 5 to 10 Microns
Speed : 2850 RPM
Model Name/Number : CPM CM
Supply Ability : 0 Piece Per Week
Colloid Mill Machine
100,000 - 150,000 Per Nos.
Voltage : 110V, 220V
Automatic Grade : Automatic
Output * : 150 to 1500 Liters.
Particle size reduction * : 5 to 15 Microns.
Hopper capacity : 15 Liters
Main Electrical Motor : 3 HP / 2850 RPM / 3 Ph.
Silent Features : Coupling provided between motor shaft & rotor shaft for ease in maintenance Three oil seals between the Motor & the processing chamber to prevent liquid going in the motor winding, Resulting in the burning of the motor Modified design of semi concave teeth in rotor & stator reduces the motor HP & gives better performance in size reduction without damaging the product Extended bearing housing specially designed to facilitate fine adjustment of bearing clearances or back lash to avoid metal to metal contact of rotor & stator. This unique design provides smooth & consistence all round performance & long life of rotor & stator Leak proof neoprene sealing device Three way cock system for draining & recirculation of liquids provided as standard. Extra discharge spout provided as standard for viscous products DOL Starter with over load relay for protection against single phasing & low voltage Contact parts can be easily dismantled for cleaning Special design facilitates adjustments of the grinding gap by an exterior screw by means of handle even during operation Flame proof motor & Flame proof rotary switch can be provided on request at extra cost
Best Deals from Colloid Mill
700 Liter Colloid Mill
95,000 Per Piece
1 Piece (MOQ)
Power : 3 Phase
Material : Stainless Steel
Capacity : 700 Liter
Speed : 2800 RPM
Weight : 160 Kg
Brand : Venus Machinery
Colloid Mill Machine
140,000 - 180,000 Per Nos
10 Piece (MOQ)
Country of Origin : India
Brand Name : PMS
Material : MS,CASTING,SS 316 AND SS 304
Certification : ISO 9001:2008 Certified
Phase : Three Phase
Voltage : 440V
Condition : New
Operating Mode : Automatic
Packaging Type : Wooden Box
Specialities : Rust Proof, High Performance, Easy To Operate
Dimension (LxWxH) : 1.5 X 1.5 X2.5 FEET
Colloid Mill
Colloid mill machine is a perfect homogenizer cum emulsifier and can be used for various pharmaceutical applications like homogenizing, emulsifying, dispersing, grinding, mixing and extracting. Since decades, we are catering the needs of various industries by reflecting the quality and workmanship of our professional engineers. Colliod mill is ideal for small, medium and large scale tablet batching systems.
Colloid Mill
colloid mill is used for reducing size of solid particles suspended in a liquid. It acts as a good homogenizer and emulsifier in a solution. Colloid mill is also used in reducing the droplet size of a liquid that may be suspended in another liquid. The equipment is specially manufactured in a conical arrangement to achieve the required centrifugal force that maximizes the milling effect. The feeding system is efficient and the machine subjects the product to high forces of shearing, cutting and rubbing forces to create a homogenous mixture.
Colloid Mill
95,000 - 135,000 Per piece
Country of Origin : India
Type : Colloid Mill
Brand Name : ACUMAC
Corrosion Resistance : Yes
Phase : 3
Shape : Rectangular
Certification : CE Certified
Voltage : 440
Color : Metallic
Machine Structure : Horizontal
Condition : New
Operating Type : Automatic
Power : 1-3kw
Warranty : 1 Year
Driven Type : Electric
Material : SS
Dimension (LxWxH) : 375x190x285mm
Machine Weight : 100-200kg
Colloid Mill
:
Model : Colloid Mill -200
Output : 100 to 2000 kgs per hour
:
:
Motor : 15HP, 2920 RPM, 415 Volts, 3 Phase, flanged
Rotor Speeds : 3600/4000 RPM
Floor Space : 600 * 1200 mm
Net Weight : 385 kg (apprx)
Mounting : Anchor Fastener
Lab Colloid Mill
MODEL : PCDM - 50
Output : 50 Liter/Hour
Rotor Speed : 2850 RPM
Hopper Capacity : 5 Liters
Partial Size Reduction : 5 to 10 microns
Electric Motor : 1 HP / 0.75 kW
Overall Dimension (Cm) : 55 (L) X 83 (W) X 100 H
The Laboratory scale colloid mill is a machine that is used to reduce the particle size of a solid in suspension in a liquid, or to reduce the droplet size of a liquid suspended in another liquid. This is done by applying high levels of hydraulic shear to the process liquid. It is frequently used to increase the stability of suspensions and emulsions. The colloid mill is used for various applications such as Superfine grinding, homogenizing, emulsifying, dispersing, mixing and extracting of liquids, ointments and highly viscous products in pharmaceutical, cosmetics, suspensions & emulsion industry. The product is fed to the hopper which leads the product into the gap between rotor and stator. The product is subjected to a high degree of shearing, cutting and rubbing between two metal toothed surfaces of rotor and stator and towards the discharge section. The processed product continuously leaves the mill through drain pipe if required, it can be re-circulated by three way cock and re-circulating pipe assembly. New Design Features: Laboratory scale colloid mill is used for Homogenizing, Emulsifying, Dispersing, Mixing, Comminuting of Ointment, Liquid and highly viscous products research and development institutions, pharmaceutical laboratory, and pharmacy colleges. All contact parts are in S.S.316 non contact parts in S.S.304 Quality. Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316 & non contact parts AISI 304. Easy to adjustment gap between rotor and stator. Three way cock assembly with re-circulating pipe. Silicon food grade seal. Separate discharge spout for highly viscous products. Optional: Horizontal or vertical drive model, water cooling systems, Explosion proof electrical.
Colloid Mill
Hopper Capacity : 15 Liters.
All contact parts are made out of SS 304 (SS 316 on demand at extra charges). No casting are used for avoiding contamination problems. Coupling provided between motor shaft and rotor shaft for ease in maintenance – Vertical Model. Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor. Modified design of semi concave teeth in rotor and stator reduced motor HP and gives better performance in size reduction without damaging the product. Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator.
Colloid
Clit Colloid Mill is suitable for Homogenizing, Emulsifying, Dispersing, Mixing, Comminuting of liquids to highly viscous products. It is based on rotor-stator principle. It is available in plan as well as Water Jacketed model which is suitable for heat sensitive products. Flame Proof electrical can be supplied on demands.
Colloid GMP Model
Clit Colloid Mill is suitable for Homogenizing, Emulsifying, Dispersing, Mixing, Comminuting of liquids to highly viscous products. It is based on rotor-stator principle. It is available in plan as well as Water Jacketed model which is suitable for heat sensitive products. Flame Proof electrical can be supplied on demands.
Colloid Mill
Hopper Capacity : 15 Ltr
Output LTR-/ Hr. : 145 to 1400 Ltrs./Hr.
Colloid mill S. S. Fabricated Square Body on which Machine and Motor both are mounted, in Vertical Type Deluxe Model.Grinding accuracy of 5 – 10 micron due to the perfectly matched & specially designed Conical shaped stator & Rotor Assly.Circular Ring Shaped, internally Conical Stator having two different tooth stages, for higher accuracy.
Colloid GMP Mill
Clit Colloid Mill is suitable for Homogenizing, Emulsifying, Dispersing, Mixing, Comminuting of liquids to highly viscous products. It is based on rotor-stator principle. It is available in plan as well as Water Jacketed model which is suitable for heat sensitive products. Flame Proof electrical can be supplied on demands.
Lab Colloid Mill
MODEL : BHagwati - 50
Output : 50 Liter/Hour
Rotor Speed : 2850 RPM
Hopper Capacity : 5 Liters
Partial Size Reduction : 5 to 10 microns
Electric Motor : 1 HP / 0.75 kW
Overall Dimension (Cm) : 55 (L) X 83 (W) X 100 H
APPLICATION & PROCESS : The Laboratory scale colloid mill is a machine that is used to reduce the particle size of a solid in suspension in a liquid, or to reduce the droplet size of a liquid suspended in another liquid. This is done by applying high levels of hydraulic shear to the process liquid. It is frequently used to increase the stability of suspensions and emulsions. The colloid mill is used for various applications such as Superfine grinding, homogenizing, emulsifying, dispersing, mixing and extracting of liquids, ointments and highly viscous products in pharmaceutical, cosmetics, suspensions & emulsion industry. The product is fed to the hopper which leads the product into the gap between rotor and stator. The product is subjected to a high degree of shearing, cutting and rubbing between two metal toothed surfaces of rotor and stator and towards the discharge section. The processed product continuously leaves the mill through drain pipe if required, it can be re-circulated by three way cock and re-circulating pipe assembly. NEW DESIGN FEATURES : Laboratory scale colloid mill is used for Homogenizing, Emulsifying, Dispersing, Mixing, Comminuting of Ointment, Liquid and highly viscous products research and development institutions, pharmaceutical laboratory, and pharmacy colleges. Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316 & non contact parts AISI 304. Easy to adjustment gap between rotor and stator. Three way cock assembly with re-circulating pipe. Easy to Moveable and dismantle all contact parts for cleaning. Silicon food grade seal. Separate discharge spout for highly viscous products. Optional: Horizontal or vertical drive model, water cooling systems, Explosion proof electrical.
Colloid Mill
Model : BMCM - 15
Output : 150 to 1500 Liters. 5 to
Particle size reduction : 15 Microns
Hopper capacity : 15 Liters
Main Electrical Motor : 3 HP / 2850 RPM / 3 Ph.
*Depending upon material characteristics viscosity, density & micron size. R&D Model Available on Customer Demand. Totally leak proof design. Unique for small volume micronization. Modified design of stator-rotor assembly. Available in plain, water jacketed & flame proof options. Easy to dismantle for cleaning and maintenance
Colloid Mill Machine
Brand Name : Cemach
Model Number : CMCM - 5 &
All contact parts are made out of SS 304 (SS 316 on demand at extra charges). No casting are used for avoiding contamination problems.Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor.
Colloid Mill
We are backed by a well-structured and capacious storehouse that assists us in furnishing urgent and quick requirements of the clients. Moreover, we ensure complete safety of the stored items. Due to our commitment towards providing quality approved products to the clients, we source the raw materials only from the well-known and trusted vendors of the market. GMP Model Suitable for Homogenizing, Emulsifying Dispensing, Mixing, Commuting of liquids to highly viscous products Jacketed (Optional) It is based on rotor-stator principle Particle size reduction 5 to 10 micron Output-120 to 12000 Kg./shift 3.0 HP 440 volts Motor
Colloid Mill
SALIENT FEATURES: All contact parts are made out of SS 304 (SS 316 on demand at extra charges). No casting are used for avoiding contamination problems. Coupling provided between motor shaft and rotor shaft for ease in maintenance – Vertical Model. Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor. Modified design of semi concave teeth in rotor and stator reduced motor HP and gives better performance in size reduction without damaging the product. Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator. Three-way cock for draining and re-circulation of liquids provided as standard. Contact parts can be easily dismantled for cleaning. Special design facilitates adjustment of grinding gap by an exterior screw by means of handle even during operation. Flameproof motor and flameproof rotary switch can be provided on request at extra cost.
Colloid Mill
size : 5 to 10 Microns
Motor : 3 HP / 2850 RPM / 3 Phase
All contact parts are made out of SS 316. No casting is used for avoiding contamination problems.Three oil seals between the motor and the processing chamber to prevent liquid going in the motor winding, resulting in the burning of the motor.Extended bearing housing specially designed to facilitate fine adjustments of bearing clearances or backlash to avoid metal to metal contact of rotor and stator. This unique design provides smooth and consistence all round performance and long life of rotor and stator.