Concrete Admixtures Dealers in Ahmedabad

• Color: Dark Brown
• Chloride Content: Nil as per IS:456 BS-5075 Part 1
• Sp. Gravity: 1.20 + 0.02 @ 25 C
• pH: 7 to 9

Dubond’s Duplast NP is a normal plasticizer , a ready-to-use, liquid admixture used for making more uniform and predictable quality concrete. Recommended from M 15 Grade of Concrete to M 25 grade of concrete Dubond,s Duplast NP( Normal Plasticizer ) is based on processed a Sulphonated Naphthalene Polymer based formulation and is supplied as a brown liquid. Generally cement particles tend to clump together and Duplast NP works by improving the dispersion of agglomerates within in the concrete mix which ensures that cement is used more efficiently. Duplast NP is low cost water reducer which can be used to get one or combination of benefits. It may be used with all types of OPC and high alumina cements. Uses Light Weight concrete Pervious Concrete Precast concrete Pumped concrete Ready-mixed concrete Rheodynamic Self Consolidating Concrete (SCC) Shotcrete ( Guiniting ) Advantages & Benefits Better Compaction and Finishing by acting as Viscosity Modifier Breaks the Salinity of Water by converting them into Salt Crystals Chloride free Easier Placing Higher Cohesion Increases Extra Bonding Strength Increases Work ability Lower water requirement for given Work ability Lowers cement content for increase in specified Strength, Workability & Durability Reduce risk of Honey Combing Reduce risk of Segregation and Bleeding Reduce risk of Shrinkage Cracks due to Heat of Hydration Reduces the risk of Rusting of reinforcement by breaking the chain of Rust Electrons Typical Properties Duplast NP is formulated to meet : ASTM - C – 494 / C - 494 M requirements. Water Reducing Admixture for concrete complies to BS – 5075 : 1982 Part 1 IS - 9103 : 1999 and ASTM - C - 494 Type A & D. Type A Water - Reducing, Type B Retarding, Type D Water - Reducing & Retarding Admixtures Direction for useDuplast NP is a ready-to-use liquid which is dispensed into the concrete together with the mixing water. The plasticising effect and water reduction are higher if the admixture is added to the damp concrete after 50% to 70% of the mixing water has been addedDosageDuplast NP admixture is recommended for use at a dosage of 150ml to 250ml / 50 kg) of cementitious materials for Type A applications and up to 350 ml / 50 kg) for Type B and D requirements. Because of variations in atmospheric conditions, job conditions and concrete materials, dosages other than the recommended amounts may be required. In such cases, contact your local sales representative. The correct quantity of Duplast NP should be measured with recommended dispenser and should be thoroughly dispersed with approx. 25 % of the recommended water content (based on mix design by weight) Mix concrete constituents along with balance approx. 75 % of the recommended water content (based on mix design by weight) for 3 minutes. As soon as step 2 is over, the admixture dispersed in water (as in step-1) is to be added to the wet concrete and mix it further for 2-3 minutes to get a homogeneous mix. CompatibilityDuplast NP admixture may be used in combination with any Dubond admixture. When used in conjunction with other admixtures, each admixture must be dispensed separately into the mix. It is also compatible with slag and pozzolans such as fly ash, metakaolin and silica fume. Corrosivity:Dubond Duplast NP(Normal Plasticizer) shall neither initiate nor promote corrosion of reinforcing steel in concrete.Shelf lifeDuplast NP has a minimum shelf life of 6 to 12 months. Depending on storage conditions, the shelf life may be greater than stated below 40˚C . Please contact your local sales representative regarding suitability for use and dosage recommendations if the shelf life of Duplast NP admixture has been exceededSafety precautionsAs with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs (which can also be tainted with vapour until product fully cured or dried). Treat splashes to eyes and skin immediately. If accidentally ingested, seek immediate medical attention. Keep away from children and animals. Reseal containers after use. Do not reuse containers for storage of consumable item.

• Hi bonding, wel dispersing liquid: MakesRCC easy spread to minimise porosity

The company is enlisted among the topmost Manufacturers and Suppliers of BB Super Admix 21 in Ahmedabad, India. Our Super Admix 21 helps in enhancing the strength of concrete. It helps in reducing permeability, bleeding and segregation. Our Super Admix 21 improves the durability and strength of concrete. We can provide BB Super Admix 21 in small as well as bulk quantities to meet the diverse demands of buyers. Benefits BB SUPER ADMIX- 21 reduces water up to 15% - 20% It Improves slump and reduces permeability, Segregation and bleeding. Increase strength and durability of concrete   Areas Of Application Structural RCC construction BB SUPER ADMIX- 21 is particularly suitable for pre-cast industries It makes concrete pumping more efficient as improves flow ability.   Instruction for use BB SUPER ADMIX- 21 should be added at the rate of 0.5% to 1% by weight of cement Mixing should be continued for at least 2-3 minutes after add BB SUPER ADMIX- 21   Precautions : Don’t use BB SUPER ADMIX- 21 Direct to concrete Over dose may lead to over delay in setting time Avoid contact with eye or skin, If occur wash by plenty of water and consult doctor.

• Application: TILE ADHESIVE
• Brand Name: PEAK
• Raw Material: CEMENT
• Packing: 20 KG
• Main Raw Material: CEMENT
• Classification: Other Adhesives
• Usage: Construction
• Keywords: TILE ADHESIVE
• Name: PEAK TILE ADHESIVE
• Shelf life: 12 Months
• Place of Origin: Gujarat, India

• Packaging Size: 50kg
• Packaging Type: Drum
• Brand Name: Madhur Construction Chemical
• Usage/Application: Industrial
• Type Of Admixture: Snf Based Admixture

• Country of Origin: Made in India
• Color: Dark Brown
• Packaging Type: Barrel
• Packaging Size: 275 Kg
• Brand: Sika
• Usage/Application: Construction
• Grade Standard: Chemical Grade
• ADVANTAGES: High water reduction. Higher strength and density. Improved consistence retention. Improved durability. Improved water tightness. Improved surface finish. Improved cohesion properties.

Oxide Cement Colours for Tiles

e are among the reputed organizations, highly engaged in manufacturing and supplying a premium grade Non Metallic Floor Hardener (solid form). This hardener is a floor hardening agent, used for improving the hardness of concrete surface. The offered hardener is widely acknowledged by our clients for its long shelf life and proper composition. The provided hardener is well-processed by our highly experienced professionals using the modern processing techniques.Features : Precisely processed Highly effective Optimum purity

Non-Metallic Floor Hardener, Shali Seal PU II

• Packaging Type: PVC Barrel
• Packaging Size: 50-250 kg
• Form: liquid
• Brand Name: Micro Chem
• Usage/Application: Construction

Concrete Additives, Carbon Black, Calcined Alumina, Engineering Plastic

Super Plasticizer, Water Reducing Admixture, waterproof coating admixture.

UPVC Solvent Cement Adhesive, PVC Solvent Cement

Concrete Admixture, Acid Dyes, Veneer Edges, Dyes Intermediate

Concrete Admixture, Colour Polymer Grouts, Tile Adhesives

Non-Shrink Grout Admixture, Kem Brush, Structural Repairing Services

Super Plasticizer, Plastic Plasticizers, Plasticizers

Super Plasticizer, PVC Water Stop, Bituminous Expansion Joint

Concrete Admixtures, Concrete Curing Compounds, Construction Chemicals

Concrete Admixtures, Super Plasticisers, Dispersing Agent

Liquid Mortar Plasticizer for Cement Sand Plaster

Superplasticizers, Construction Chemicals, Epoxies, Epoxy Grout

Concrete & Mortar Admixtures

Cement Admixture, Gray Portland Cement, Furan Mortar

Concrete Admixture, Construction Chemicals, Water Proofing System, Sealants