Electronic Detectors Dealers in Ahmedabad

Product Description: Our company has gained a wide recognition as a prestigious organization to offer our clients the premium quality range of Fire Detector. Features: Perfect strength Rigidness Reliable usage

We supply highly advanced Hand Held Metal Detector in the market. Our Hand Held Metal Detector has a proper and user friendly grip handle. We always ensure that our Hand Held Metal Detector serve its purpose to the most. Hand Held Metal Detector that we offer are strictly made using the latest technology. Features Easy to useReasonable price rangeFull securityTamper resistant

Detection of explosive gases, toxic gases or oxygen Infrared XP version SIL 2 high reliability IP 66 Aluminum or Stainless Steel version The OLC/OLCT 100 range of fied detectors has been designed for detection of explosive gases, toxic gases or oxygen. At Oldham, our products are always application driven, solution-oriented. Options include: OLCT 100 transmitter with 4-20 mA output OLC 100 detector with a Wheatstone bridge output for detection of explosive gases. Available in explosion-proof or intrinsically safe versions, the OLC (T) 100 is suitable for detection of all gases in ATEX zones. The OLCT 100 is available in a stainless steel version, offering increased resistance to corrosive elements (ideal for marine, wastewater treatment plants, food processing activities…). This stainless steel intrinsically safe version is certifid for use in zones 0 (gas) and 20 (dust), whereas all other versions of the OLCT 100 are certified for use in zones 1 (gas) and 21 (dust).

Integration of metal detector with deduster and deduster in controlled by the metal detector. Highly effective dust removal, hence high quality dedusting and duburrring. Independent frequency and voltage (power) control for optimum dedusting & deburring. Drive unit of deduster is of international quality and not motorized one. Very low outside vibtrations. Very low audio noise. Superior vibrations of spirals. Multiple tumbling. Gas spring used for heigh adjustment. Provision made for lateral adjustment also. Extrmely easy for cleaning. Parts can dismantled and asseembled within minutes. Singel table also travel and cleared completely. One unit One plug for input supply. Interlocking.

Fire System Supply, install, test and commission FireRay Beam Detector-3000, which is end to end infrared Optical Beam Smoke Detector has been designed using the latest optical technology, incorporating modern industrial, electronic and software techniques.

Owing to our rich industrial experience we produce an array of Handheld Metal Detector for our prestigious clients. These can be used at domestic as well as for commercial purpose. These Handheld Metal Detectors can detect almost any kind of metal and potential danger. Furthermore, these are widely used at the entry pass of malls, pubs, cafes multiples so as no one can carry any dangerous material like weapons. We provide all tyep of metal detector (i.e. on request of customer).

Tempreture Detectors   Multisenor Detecotrs :     The Context Plus XP95 multisensor detector contains an optical smoke sensor and a thermistor temperature   sensor whose outputs are combined to give the final analogue value.   The multisensor construction is similar to that of the optical detector but uses a different lid and optical mouldings to accommodate the thermistor temperature sensor. The sectional view (below) shows the arrangement of the optical chamber and thermistor.   The signals from the optical smoke sensing element and the temperature sensor are independent, and represent the smoke level and the air temperature respectively in the vicinity of the detector. The detector’s microcontroller processes the two signals. The temperature signal processing extracts only rate of rise information for combination with the optical signal. The detector will not respond to a slow temperature increase – even if the temperature reaches a high level. A large sudden change in temperature can, however, cause an alarm without the presence of smoke, if sustained for 20 seconds.   The processing algorithms in the multisensor incorporate drift compensation. The control panel must not have a drift compensation algorithm enabled.   The sensitivity of the detector is considered the optimum for most general applications since it offers good response to both smouldering and flaming fires.Note: In situ testing of the multisensor should be carried out as for smoke detectors.   Optical Smoke Detectors:   The Context Plus XP95 optical detector uses the same outer case as the ionisation smoke detector and is distinguished by the indicator LED which is clear in standby and red in alarm. Within the case is a printed circuit board which, on one side, has the light proof labyrinth chamber with integral gauze surrounding the optical measuring system and, on the other, the address capture, signal processing and communications electronics.   An infrared light emitting diode within its collimator is arranged at an obtuse angle to the photo-diode. The photo-diode has an integral daylight-blocking filter.   The IR LED emits a burst of collimated light every second. In clear air the photodiode receives no light directly from the IR LED because of the angular arrangement and the dual mask. When smoke enters the chamber it scatters photons from the emitter IR LED onto the photo-diode in an amount related to the smoke characteristics and density.

The QRAE Plus is a full-featured, compact, one-to-four sensor confined space gas detector. Its features include easy-to-change, externally accessed battery packs

This camera lens and WiFi signal detector is proudly brought to you by the leaders in both spy and counter spy surveillance products.   At a Glance...Counter Surveillance Wifi Network locator Proximity detection alert Find Hidden camera lenses Detect Wireless Video Signals NEW!! Built-in Compass   Specification : Primary Function: Wifi Detector and Camera Lens Finder Material: Hard Molded Plastic Detecting Wave Distance: 920nm Receiving Range: 1MHz - 6500 MHz Optic Lens: Professional Grade IR Lens On Board Buttons: Retractable Antenna, - Sensitivity +/- Control, OFF, Audio Alarm, Proximity Alarm, LED Indicators Fro Proximity Detection Dimensions: L: 93 x W:48 x D:17 (mm)

A metal detector is a device which responds to metal that may not be readily apparent. The simplest form of a metal detector consists of an oscillator producing an alternating current that passes through a coil producing an alternating magnetic field. If a piece of electrically conductive metal is close to the coil, eddy currents will be induced in the metal, and this produces an alternating electric field of its own. If another coil is used to measure the electric field (acting as a magnetometer), the change in the magnetic field due to the metallic object can be detected.