Gas Regulators Dealers in Ahmedabad

We offer Two Stage Pressure Regulator. Technical Specification Fluid Material All gases corrosive or non-corrosive or those requiring high purity regulations complete with materials or construction. Max. Rated Inlet Pressure 6000 PSIG Outlet Pressure Range 1-25, 2-50, 10-200, 20-300, 100-600 Flow Capacity 0.06 Inlet Outlet Port Size 14", 38", 12" NPTBSP

"Flow-Tek" FT-LPRV- Gas Back Pressure Regulator is the ideal valve for low-pressure gas regulation. The FT LPRV works in conjugation with the in a low-pressure tank blanketing valve system.LPRV can be used to vent gas from the tank to prevent the blanketing pressure from rising to a level that could damage the tank while maintaining a small, constant flow to keep the blanket fresh. During filling, It opens to allow gas to escape as the vapor space in the tank grows smaller. To size properly, find the rate of fill so that a regulator can be chosen based on it's ability to relieve the required amount of gas while sustaining desired blanketing pressure. The Mark 508 will also work well in any other type of low back-pressure gas application.   APPLICABLE STANDARD   Design Standard : MFG. STANDARD Face to Face : MFG .STANDARD End Connection : Flanged End to suit ANSI / DIN / BS / JIS / IS etc. Testing Standard : API 598 / CONTROL VALVE ANSI-FCI-70-2-2006 STD

Our organization is reckoned as one of the prime Manufacturers, Exporters and Suppliers of Brass LPG Three Key Regulator from Gujarat, India. Brass LPG Three Key Regulator is extensively used in various gas tanks and fire extinguishing system to control the oxygen emission. This Three Key Regulator is built special type non-return valve and main 'off- on' key is locked. It is available in variegated specifications to suit diverse requirements of the buyers.

We offer high efficacy Medical Gas Control and Automatic Changeover, which is highly acknowledged in the national as well as international markets. We have firmly positioned ourselves as one of the overruling central pipeline for Oxygen Supply System in India. Made as per international standards, our Oxygen Supply System is highly demanded due to its distinctive features mentioned below :

The Model 243 service regulator is a large capacity industrial service regulator designed for commercial, industrial, and gas distribution use. As a result of the union connection between the fully interchangeable bodies and the diaphragm case, they have remarkable field versatility. They are easy to install, adjust, inspect, and service in all piping arrangements. The model 243 can be used in a variety of applications such as: factories, foundries, district regulator stations, commercial laundries, and all types of gas fueled equipment including boilers, burners, furnaces, ovens, heaters, kilns, and engines.  

Technical Specification Application Air/Liquid/Gas Sizes 1/2"3/4" NPT Inlet Pressure-Max 5000 PSIG Outlet Pressure-Max 0 to 4000 PSIG Temperature Range 100 C Orifice Size 1/8", 1/4", 3/8", 7/16", 1/2"5/8", 7/8" Pressure Range 200, 300, 350, 450, 550, 1150*, 1650* PSI   Over pressurization protection : Protect the downstream piping system and the regulator's low pressure chambers against over pressurization due to possible regulator malfunction or failure to achieve complete lockup. The allowable outlet pressure is the lowest codes, state codes, Nu-Tech bulletin NEV-300 or other applicable standard. The method of protection can be relief valve, monitor regulator, shutoff device or similar mechanism.

Salient Features : Forged Brass Body Sintered Metal Filter for Very Low Maintenance High Quality Syntheetic Material Moulded Seat Valve Accurate Safety Valve For Safe Operation All Spare Parts Available

The gas governors are conformity with EN 88 standard (2009/142/CE gas regulation). The governors are suitable to systems' installation with automatic gas burners including mixed and combined systems and to in industrial distribution systems. TECHNICAL FEATURES Compensation diaphragm, operating diaphragm and safety diaphragm: an external breather outlet pipe is not necessary as the incorporated safety diaphragm ensures that, in the event of breakage of the operating diaphragm, no gas leakage (over 30 dm3/h) is possible inside the room (in compliance with par. 3.3.2. EN88 specifications). INSTALLATION Install the governor with the diaphragm positioned horizontally (on horizontal pipes). Be careful to follow always the direction of gas flow indicated by the arrow on the governor.Suitable tools must be used for the governor fitting on the inlet and outlet hubs. Never effect leverage on the sleeve of the upper cover when fitting the governor. For all models with the filter inside, the governor is best fitted at a comfortable height from the ground so as to facilitate the filter cleaning (fit always a suitable gas filter upstream the governor).Make sure that the pipes are clean and aligned so the governor is not under stress. Do not remove the perforated diaphragm breather cap (3) and do not obstruct the hole, otherwise the governor will not work. Install the governor so avoiding contact with plastered walls. Make sure that the governor is suitable to the intended use.