Gaskets Dealers in Ahmedabad

We offer a variety of PTFE seals and gaskets as per the user's specifications. PTFE seals are reliable, corrosion resistant, non - contaminating non-aging and can be used up to +250° C. Envelope Gaskets are named so as rubber or asbestos rings are sandwiched between PTFE flaps. These gaskets have the resilience of asbestos or rubber but have corrosion resistance of PTFE and are widely used in glass, glass-lined, carbon, porcelain or plastic equipment.

We offer a wide range of high quality gaskets that is a kind of mechanical seal used for filling the space between two adjoining surfaces. The gaskets are available in different designs based on various parameters like industrial usage, physical & chemical contact and budget of clients. Some gaskets require sealant on their surface, so as to ensure their efficient functioning. Furthermore, specifically designed gaskets may also contain some composition of asbestos.

Rubber Ring For RCC Pipe We are a prominent manufacturer and supplier of a comprehensive range of Rubber Ring for RCC Pipes and Prestressed Pipes NP 2, 3, 4. Our range has been manufactured in accordance with international standards. RCC and pre-stressed pipes are catering to the needs of various areas such as water supply, irrigation, drainage, power generation and rail transport. Our Rubber Rings are used for providing excellent sealing and leakage prevention of fluid.

we offer ptfe gasket. Ptfe gaskets are available in raise face size & full face size. Ptfe gaskets are also available as per client drawing specification.gasket are available in 1.5 mm, 2 mm & 3 mm, 4 mm, 5 mm  thick. Gaskets are manufactured to suite different flange standard  like; e/f table, ansib-16.5-150, 300 & 600. Class flange, “din”  standard flanges from 1/2” nb (15nb) to 28” nb. Ptfe gaskets  are available in raise face size & full face size. Ptfe gaskets are  also available as per client drawing specification.  

We manufacture tri-clover gaskets in : 100% pure food grade silicone rubber. Conforms to fda 21 cfr.177.2600 & usp class vi requirements. Silicone tri-clamp gaskets are available with collar for better‘ grip and also without collar. Available in red, white, black & transparent colors. Available in platinum cured silicone rubber.

Our company is counted amongst the dependable Cut Gaskets Suppliers in India. Meeting the specific requirements of the national as well as international clients, the company has acquired noteworthy position amidst the reliable Die Cut Gaskets Exporters. The use of optimum quality materials in the manufacturing of the Cut Gaskets ensures high durability, tensile strength and resistivity to adverse conditions. Additionally, customers are eased with the availability of the Custom Cut Gaskets in varied sizes and dimensions confirming to the specifications provided. Custom Design & Production : With in house tooling and a full range of ex-stock materials to match your specifications. Uni Klinger can deliver from on off, to major project quantilities, promptly and economically. Uni Klinger technical support is available when designing gaskets and specific design data on each grade of Uni Klinger materials can be provided whatever size shape or type of compressed fibre gaskets you need. Uni Klinger can produce them. Stock Gaskets : Uni Klinger manufactures and stocks a wide rang eof standard pie flange gaskets to IS, ANSI & DIN standards in both flat ring for raised face flanges or full face for flat face configurations. Anti-Stick : Klinger 3XA anti-stick property eliminates the need for application of graphite or grease. Use of graphite or grease impairs the creep resistance of all jointing and is not recommended. The ASTM F607 release test on Klinger 3XA shows more than a three - fold improvement compared to standard jointing. Anti-Corrosion : Klinger 3XA surface finish reduces the amount of reachable chlorides at the contact surface with the flange, thus substantially reducing the corrosive effect of materials with reachable chlorides over 100 ppm. The ASTM F64 corrosion test shows that our materials are classified in category 1 of 6 categories where 6 indicates the highest degree of corrosive attack. 3XA Improves Sealing qualities : 3XA completely conforms to the irregularities of the flange face giving better micro sealing. Klinger tests based on the DIN 3535 gas leakage test gives typical results of 0.2ml/min for 3XA finish).

Pipe flange gaskets are used for improved joint performance. They are considered much more superior than the conventional ring or full-face gaskets. Although pipe flange gaskets are usually used for all normal water and sewer service, they are especially useful in demanding services like in very large diameter flanged piping. For specially designed long-span installations, involving 2 or 3 or more lengths of pipe or with any underground flanges, flange gaskets are of great help because they could be subjected to undesirable beam loading. These gaskets are available in numerous standard materials in various thickness and hardness options for various flange sizes. Flange gaskets are also available with adhesive on one or both sides or without adhesive. Most materials are available starting at 1/32” thick and can be supplied up to 1” thick. Some manufacturers supply flange gaskets in wide rolls from which you can cut your flange gaskets to size. Flange gaskets are also available to your exact requirements. Pipe flange gaskets are being very frequently used for flanged joints which are subjected to extreme chemical attacks. Materials used:Flange gaskets are made of various materials like: Rubber: Neoprene, EPDM, Nitrile, EVA, Silicone, Cork and Cork Rubber Closed Cell Foam: Cross-linked Polyethylene, PVCPlant Fiber Cellulose FiberMetal: Steel, Stainless Steel, Aluminum, Copper, Cast iron etc.Wire Seal Flange Gaskets and Bolt Sets General: Nonrotatable flanges with clearance bolt holesNominal OD sizes: 12 3/8 to 27 1/8 inchesTube OD sizes: 10 to 24 inches Materials Flanges: 304 stainless steel (316L available upon request) Bolts: 18 - 8 stainless steel Vacuum range: >=1 x 10^-13 Torr - UHV Temperature range: -200°C to 450°CApplications of Typical Flange Gaskets:HVAC (Heating, Ventilation, and Air Conditioning) Industry: Usually, flange gaskets used in this industry are made of different types of rubber. They are usually supplied with adhesive on one or both sides in various shapes like round (I.D. x O.D.), rectangular and square outside shapes. Flange Gaskets are available for wide flange configurations.Plumbing Industry: Here, the standard ring and full face flange gaskets are available in various styles.Sheet Metal Enclosures: The flange gaskets used here are normally rectangular in shape. They come with adhesive on one side which is used as a gasket to seal out dust, liquids or air.Electronic, food, medical, chemical and packaging industries: The flange gaskets used here have a flat surface that is compressed between two flanges.  

  We are one of the leading manufacturers and exporters of qualitative Silicone Sponge Gaskets. These are offered in round square and rectangular cross section. We offer these gaskets in multiple color options such as white, red and orange. Our silicone sponge gaskets conform to the standards PDA 21 CER 177.2600. These gaskets are widely used in industrial segments like tractors & farm machinery, components/assemblies manufacturers’ hydraulic machinery and flanges and fittings.   These are widely appreciated for the following features:•    Accurate dimension•    Abrasion resistant•    High flexibility•    Longer service life 

Product Description Gaskets are sealing and cushioning material, frequently placed between two surfaces joined by bolts. Mechanics commonly replace a gasket when performing major work on the engine.

The basic properties of Rubber is elasticity, which functions in Rubber Gaskets to maintain a perfect seal after creating a pressure on a contacting surface. They are design to withstand a broad spectrum of temperature by choosing the right elastomer for their end use.