Keshar Automation Changodar, Ahmedabad, Gujarat

This machine is designed to glue the PE liner (it’s called liner opener) for the big bag by hot melt glue system.Liner opener Folder Models: KALO-125 In this machine we can adjust liner size as liner size for from it shape are square shape Of the liner min 30 cm to 125 cm and body length we adjust up to 220 cm as per requirements Will gluing time liner sucked in position by 3 hp blower and wile insert the bag its blow air on one 3 hp motor and opening system pneumatic 2 cylinders And its rotated 360 degree continues by any on direction

Modern FIBC industry for food grade should be neat and clean, i.e. There should not be any foreign particles OR loose threads or other inside the bags and which is very difficult to clean manually. For this we offer automatic cleaning M/C by which we can clean the bags from BOTTAM, from TOP and from TOP & BOTTOM respectively. Air is pre filtered with static discharge and is blown through the bag so that all dust and foreign particles settled in the bag should come out of bag. After cleaning the dust and foreign particles like loose thread will be collected in the dust collection box Which can be easily taken out and the dust collection box is provided with micro filter so that dust should not come out of the dust collection box.In these machines we provide camera on top and bottom. For we can see the inside of the bag. Machine is controlled by high-resolution microprocessor controller, which is user friendly by which you can set different operations The delivery time of the Automatic FIBC cleaning Machine is approximately 30 to 45 days. Salient Features         High efficiency.     Provided static discharger.     Provided camera with LED monitor.   Provided with high pressure blower.   Provided with micro pre filter for incoming air.   Provided with micro filter to dust collection box for avoiding the cleaned dust and foreign partials going out of the box.   Provided with high-resolution microprocessor controller.

For economical and efficient storage or transportation, the finished bags should be pressed and packed properly.Our hydraulic palletizing press is specially designed for packing on the pallets as well as in the form of bales. To prepare palletized bales, first a wooden pallet is placed on the base of the press. Then the bags are properly stacked on the pallet inside the empty cabin. Piston can be activated vertically by pressing a button. Maximum pressing capacity of our standard press is 100 tons. This power can be increased or decreased upon request. During the operation, when it reaches the maximum pressure, the piston automatically stops and locks itself. One man can operate the whole process. Plastic straps are recommended for binding the finished pallet. With the moveable side door, it makes it easily when pushing the pallets out. Ready pallets are discharged out of the cabin automatically with a discharge piston, without needing a forklift.  Salient Features         High efficiency with accuracy.     Rigid construction of top & bottom beds.     Automatic ejection system for finished pallets & bales.   Door opening from three sides.   Provided with heavy duty power pack.   Provided with heavy duty hydraulic cylinders.   Pressure adjustable system.

Dimension (LxWxH) :  

Width : 1150 mm (can be changed upon request)

Height : 2300 mm (can be changed upon request)

Width : 280cm (W1:90cm + W2:150cm + W3:40cm)

Height : 410 cm

Our Auto FIBC Fabric cutting machine higher output of fabric in an hour with one worker without any error, this is the right machine for your request.Once you set the required cut length the machine works automatically till it reaches the set quantity, on HMI In This machine we can be optionally designed for Round Spout cutting, Plus, U shape Web alignment system. Its stacking is done manually Ones, after its self alleging its self As this Machine is running with modern microprocessor controller manual counting is not required. This counter is having built in shift counter, error setting, set roll Qty etc. Loading of fabric roles up to 1.2 metric ton is done by one operator by pneumatic Arrangement. The delivery time of the fabric-cutting machine is approximately 30days.In this machine we develop new technology for heat cutting system no need to cartage heaters We using very thin martial for cutting fabric with transformer with adjustable amperes to cut the fabric  Salient Features         High efficiency with accuracy.     Heavy duty fabric feeding roller.     Online fabric tension control device.   Easy load and unload of roll by pneumatic system   Positive grip for feed rollers by pneumatic system.   fabric with transformer with thin blead   Complete modern high-resolution micro processor control system.   High accuracy length and spout cutting system   Easy setting through HMI (Human machine inter face).   Sharp edge cutting with thin blade   Spout cutting facility (O. U. X.+ optional).