Laboratory Hood Dealers in Ahmedabad

Complete Body are made of Mild Steel (M.S.) With Powder Coated. With Ducting System. Front side transprant glass door with handles. With Electrical switch board. Working Size : - 2' x 2' x 2' feet. 3' x 2' x 2' feet. 4' x 2' x 2' feet. 6' x 2' x 2' feet.

      Introduction Fume hoods are recommended for exhaust from the hood working area of gases, vapour, toxic particles & odour to improve working environment of people who regularly handle toxic substances. Theese eqipment reduce personal exposures and odor level in the laboratory. The Fume Hoods are designed to exhaust toxic or otherwise harmful vapors etc. for protecting laboratory personnel & equipments. A motor-blower exhaust system generates negative pressure within the hood, extracting the contaminated air from the working area and expelling it outside the building atmosphere and thereby preventing the fumes spreading into the room.   Construction The main body of the fumes hood is asbestos or FRP lined. The work surface (worktable) is of stainless steel sheet. A small S.S. Sink, water tap and water outlet are provided. A sliding door made of acrylic, moves vertically up/down with counter balanced weight operated by steel rope. Hood is provided with fluorescent light for easy working in the chamber. A metal clad socket and gas cock is also provided in the chamber. The control panel is fitted with on/off toggle switches for mains, motor-blower and tube light and mains indicator. Powerful exhaust assembly of 150 mm dia 20 feet long PVC ducting with rain guard. The additional length of PVC ducting will be at extra cost.   Working Area (Ft) L4 x D2 x H2L5 x D2 1/2 x H3L6 x D3 x H3

We are one of the well known manufacturers and suppliers of fume hood. This product is available in both wooden and steel finish and provides good work place. The offered product is absolutely risk free while performing any kind of experiment. Clients can avail this product in both standard and customized form as per their requirements. product features: • facilitated with complete exhaust system • inner body is chemical resistant • outer part is laminated with fine mica • working area of 2' x 2' x 2’, 3' x 2' x 2' • easy to install • efficient to use.

Fume hoods are recommended for exhaust from the hood working area of gases, vapour, toxic particles & odour to improve working environment of people who regularly handle toxic substances. Theese eqipment reduce personal exposures and odor level in the laboratory. The Fume Hoods are designed to exhaust toxic or otherwise harmful vapors etc. for protecting laboratory personnel & equipments. A motor-blower exhaust system generates negative pressure within the hood, extracting the contaminated air from the working area and expelling it outside the building atmosphere and thereby preventing the fumes spreading into the room. Construction The main body of the fumes hood is asbestos or FRP lined. The work surface (worktable) is of stainless steel sheet. A small S.S. Sink, water tap and water outlet are provided. A sliding door made of acrylic, moves vertically up/down with counter balanced weight operated by steel rope. Hood is provided with fluorescent light for easy working in the chamber. A metal clad socket and gas cock is also provided in the chamber. The control panel is fitted with on/off toggle switches for mains, motor-blower and tube light and mains indicator. Powerful exhaust assembly of 150 mm dia 20 feet long PVC ducting with rain guard. The additional length of PVC ducting will be at extra cost. Working Area (Ft) L4 x D2 x H2 L5 x D2 1/2 x H3 L6 x D3 x H3

LaboFab introduce complete fume hood solutions that integrate storage and work surfaces so that you’ll have a built-in solution when working with chemicals and other flammable materials. In addition, there are a variety of styles and designs that usually go along with choosing fume hoods or a completely integrated solution, such as those that have canopy or demonstration hoods as well as different sash types. LaboFab offers a wide range of fume hoods for every laboratory application including general purpose hoods. LaboFab fume hoods are manufactured from best quality C.R.C.A Sheets of 18/20G which are duly provides better protection from acid fumes in the lab. LaboFab fume hoods are aerodynamically designed considering most efficient airflow to the suction. Double wall feature provides easy access to utilities like Water, gas, vacuum & electricity. Fume Hood Design:   Bench Top Fume Hood Low Bench Fume Hood Walk-IN Fume Hood   Detachable base storage cabinets are provided with castors for easy maintenance, LaboFab offers variety of lining & work surfaces like Granite, ceramic, S.S., P. P. & FRP. Sash is provided with 6 mm toughened glass & counter balance is provided to achieve easy movement. High performance centrifugal blower is provided with different ducting materials like PP/PVC/HDPE etc.

Extensively used in pharmaceutical industries, research institutes, laboratories and public sector units, our Fume Hoods are designed in sync with the international quality standards.  We are reckoned among the prominent Manufacturers and Suppliers of Fume Hoods (HSW126) from Gujarat. Fume Hoods we make available protect laboratories from hazardous chemical gases and acid fumes. We are capable of delivering bulk orders of the Fume Hoods within the allocated time.

Laboratory Chemical Hood, Modular Lab Furniture, Hotel Metal Bed Fram

Laboratory fume hoods are a type of ventilation system with the primary function is to exhaust chemical fumes, vapors, gasses, dust, mist, laboratory hoods, SS fume hood and aerosol. Fume hoods also serve as physical barriers between reactions and the laboratory, offering a measure of protection against inhalation exposure, chemical spills, run-away reactions and fires.

Laboratory Fume Hood, Laboratory Furniture, Laboratory Tabl

Fume Cupboard, Steel Furniture, Lockers, Glass Door Cupboard