Laboratory Hood Dealers in Ambala

(68 products available)
  • Premium
    Fume Hood Chamber

    Fume Hood Chamber

    Get Price Quote

    • Height5ft, 6ft, 7ft, 8ft
    • FinishingPolished
    • ApplicationLaboratory Use
    • ShapeRectangular, Square
    • MaterialMetal
    • Number Of FlowerChamber
    • Size10ft, 5ft, 8ft
    • Capitalizing on our state-of-the-art facility, vast experience and rich resources, we endeavor to proffer the Fume Hood Chambers that are impeccable in every aspect, be it designing, functionality or reliability. Our name figures amid the illustrious Manufacturers and Suppliers of the Fume Hood Chamber from Haryana, India. All needs of our clients are gratified by making available these Chambers in the choicest specifications at the unbeatable prices.\\nMore About Fume Hood Chamber :\\n\\nFume Hood Chamber is designed to contain and exhaust toxic, obnoxious or otherwise harmful gases, vapors, mist etc. to protect personnel and equipment.\\nThe motor driven blower of Fume Hood Chamber creates negative pressure within the chamber extracting the contaminated air from work area and expels it to the atmosphere.\\nThe hood is ventilated of the air drawn from inside the laboratory which is used effectively for through sweep out of the work chamber.\\nFume hood made of stainless steel or mild steel.\\nThe outer (size 3’ x 3’ x 6’ feet) is made out of S.S 304 grade, mild steel powder coated and wooden mica pasted finished and 316 grade inside acid resistant.\\nThe work surface is fitted with small wash basin with good quality tap.\\nA gas cock is also fitted for gas supply. A sliding slash made of glass moves vertically up and down with concealed counter balanced weight.\\nChamber is fitted with 20W fluorescent light.\\nSpace underneath the work station is provided with storage compartment.\\n15/5 Amp socket with switches is provided for light and exhaust system.\\nFume Hood Chamber is supplied with cord and plug to work on 220/440volts 1/3 phase 50Hz A.C. Complete with exhaust system PVC 4” x 10’ft round fume duct.\\nThe duct for exceeding above 10’ft length high CFC exhaust system provided optional.\\n\\n \\nFeatures :\\n\\nInbuilt centrifugal blower unit\\nFluorescent tubes with safety electrical\\nInitially located electric plugs.\\nGas and air connections.\\nCounter balanced sliding up & down front sash (door)\\n
    ...more
    www
  • Premium
    Mild Steel Fume Hood

    Mild Steel Fume Hood

    44,000 / Piece

    • MOQ1 Piece
    • MaterialStainless Steel
    • FinishingPolished
    • ShapeRectangular
    • ApplicationLaboratory Use
    • SizeStandard
    • Country of OriginIndia
    • Height5ft, 6ft
    • A chemical fume hood is a ventilated enclosure used to trap and exhaust vapors, gases, and nanoparticles. The exhaust fan is typically stationed at the top of the building and pulls air through the duct work connected to the hood and exhausts it into the atmosphere Hood.
    ...more
    www
  • Premium
    Lab Fume Hood

    Lab Fume Hood

    Get Price Quote

    • MOQ1 Box
    • Size10ft, 4ft, 5ft, 6ft, 8ft
    • MaterialMetal
    • ShapeRectangular
    • CertificationISO 9001: 2015
    • ApplicationLaboratory Use
    • ConditionNew
    • FinishingPolished
    • Height5ft, 6ft, 8ft
    • Our Lab Fume Hood, which is made up of plastic & polypropylene materia, finds application in chemical laboratory. We are capable of meeting bulk or urgent requirements effortlessly due to our latest inventory management system and automated management. By this, the stocks are piled up safely to ensure delivery without loss. Backed by an efficient network and trustworthy resources, we have emerged as a dominant supplier of Lab Fume Hood in the market.
    ...more
    www
  • Premium
    Fume Hood

    Fume Hood

    36,000 / piece

    • MOQ1 Piece
    • Number Of FlowerFume Hood
    • MaterialMetal, Stainless Steel
    • ShapeRectangular
    • ApplicationLaboratory Use
    • ConditionNew
    • Country of OriginIndia
    • ModelBPL-126
    • UsageLaboratories, Hospitals
    • Fabricated out of a thick wooden board. It is designed so as to throw out all toxic/harmful vapors & fumes thus protecting costly instruments and the persons working in the lab. Outer is finished with sunmica and inner epoxy painted. The working table top is acid/alkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counterbalanced weights. The unit is fitted with fluorescent light and a gas cock for gas/air supply. The front-facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. To work on 220/230 volts A.C. supply.   Working chamber size: 90x60x60cm 120x60x60cm 120x75x75cm 150x75x75cm   Product Details : Whole cabinet made of wooden board laminated with sunmica Whole cabinet made of Cold Rolled steel duly powder coated    Whole cabinet made out of Stainless Steel.   OPTIONAL : High CFM Exhaust System( for duct exceeding 10 feet in length ) PVC Fume Duct (per ft.)
    ...more
    www
  • Premium
    Fume Hood

    Fume Hood

    Get Price Quote

    • Size10ft, 5ft, 6ft, 8ft
    • Number Of FlowerFume Hood
    • MaterialMetal
    • ShapeRectangular, Square
    • CertificationISO 9001:2008
    • ApplicationLaboratory Use
    • FinishingPolished
    • Height5ft, 6ft, 7ft
    • Approx. PriceAir Volume
    • BLUEFIC INDUSTRIAL AND SCIENTIFIC TECHNOLOGIESis a leading name among the major Fume Hood manufacturers and suppliers based in Ambala City. The Fume Hood System manufactured by us is appreciated by our huge client base for... Made from thick wooden board Throws-out all toxic/harmful vapors & fumes Outer surface made from SUNMICA Inner surface epoxy painted Acid/alkali resistant table top Fluorescent light Optional Accessories :- High CFM exhausts System (for duct exceeding 10 feet in length) S.S. Lining on work bench PVC Fume Duct (per ft.)
    ...more
    www
  • Premium
    Fume Hood +2

    Fume Hood

    88,500 / pcs

    • MOQ1 pcs
    • Brand NameZoom
    • MaterialStainless Steel
    • FinishingPolished
    • ConditionNew
    • ShapeRectangular
    • CountryIndia
    •  the fume hood is  made up of mildsteel in side the  electronic switch and socket in bilit the fume hood, front slading glass door working table is made of stainless steel on instrument. one exaust system with exaust pipe.
    ...more
    www
  • Fume Hood

    Fume Hood

    36,500 / Piece

    • MOQ1 Piece
    • ConditionNew
    • ApplicationLaboratory use
    • Brand NameMOHIT SCIENTIFIC WORKS
    • Automation GradeSemi-automatic
    ...more
  • Laboratory Fume Hood

    Laboratory Fume Hood

    59,000 / Piece

    • MOQ1 Piece(s)
    • Size1200x850x2350 mm
    • MaterialStainless Steel
    • ShapeRectangular
    • ApplicationLaboratory Use
    • FinishingPolished
    • Voltage220 V
    • Weight120 Kg
    • Power Supply3 HP
    ...more
  • Fume Hood (wooden)

    Fume Hood (wooden)

    Get Price Quote

    • Power SourceElectric
    • TypeFume Hood
    • MaterialWooden
    • UsageContain And Exhaust Toxic, Harmful Gases, Vapours, Mist To Protect Personnel And Equipment
    • FeaturesGas Tap, Electric Plug, Fluorescent Tubes, Work Bench/Table With Cupboard And Drawer
    • CompatibilityLaboratory Use
    • Design AvailableMotor Driven Blower, Negative Pressure Chamber, Ventilated Hood, Counter Balanced Sliding Sash
    • Fume Exhaust hoods are designed to contain and exhaust toxic. Obnoxious or otherwise harmful gases, vapours, mist etc. to protect personnel and equipment. A motor driven blower created negative pressure within the chamber extracting the contaminated air from work area and expel it in to the atmosphere. The hood is ventilated of the air drawn for inside the laboratory which is used effectively for through sweep out of work chamber. Fabricated out of best quality thick weather resistant Duroboard clad in Mica Lamination from outside, Inner chamber finished in chemically-resistant Epoxy paint and work surface covered with glazed tiles and counter balanced slid ' ing Sash Fluorescent tubes are fitted inside. A gas tap and an electric plug is also provided to work on 220/230 V AC 50 Hz power plug.A work bench/ Table (optional) to install the equipment any where in the lab can be supplied. The work bench is fabricated out of square steel pipe or hard wood and have a cupboard and a drawer.
    ...more
  • Fume Hood

    Fume Hood

    Get Price Quote

    Fabricated out of thick wooden board or heavy gauge PCRC sheet mounted on sturdy angle iron frame. Fume Hoods are designed so as to throw-out all toxic/harmful vapors, thus protecting costly instruments and the person operating it. Outer is finished with sun mica or enamel paint and inner epoxy painted. Working tabletop is fitted with acid/alkali resistant tiles & a washbasin with connections provided inlet &outlet of water. the front door slides up &down on concealed counter balance weights. The unit is fitted with fluorescent light &gas cock for air/water supply. 
    ...more
  • Fume Hood

    Fume Hood

    Get Price Quote

    • Size10ft, 4ft, 5ft, 6ft, 8ft
    • MaterialMetal, Stainless Steel
    • ShapeRectangular, Square
    • CertificationISO 9001:2008
    • ApplicationLaboratory Use
    • ConditionNew, Used
    • FinishingNon Polished, Polished
    • Height5ft, 6ft, 7ft, 8ft
    ...more
  • Fume Hood

    Fume Hood

    Get Price Quote

    • ApplicationLaboratory Use
    • LightingFluorescent illumination lights
    • UtilitiesStorage cup board, 15/5 AMP Switches and socket.
    • Working Area Size60 X 60 X 60 cm.
    • Fume hoods are important laboratory safety devices created to keep users safe from harmful fumes, vapors, and airborne contaminants during chemical experimentation and handling. It provides a breathable space protecting from harmful contaminants, ventilates, and filters it out, rendering it paramount for research laboratories, the pharmaceutical industry, and educational set-ups.
    ...more
  • Fume Hood

    Fume Hood

    Get Price Quote

    We bring forth highly efficient Fume Hoods for the laboratories across the country and abroad. We are enlisted with the eminent Manufacturers, Exporters, and Suppliers of Fume Hoods from Haryana, India. These large pieces of equipment that we offer are made of wide wooden boards. They are designed and developed in absolute adherence to quality norms, so as to reduce the exposure of toxic vapors. Details : Outer finish is done with sun mica and inner with epoxy paintWorking table top is fitted with acid/alkali-resistant tiles and a small wash-basin with connections provided for inlet and outlet of waterThe front door moves vertically up and down with concealed counter balanced weightThe unit is fitted with fluorescent light and a gas cock for gas/air supplyThe space under the work station can be provided with storageCompartments for storage purpose at an extra cost (see Optional Accessories)The front-facing panel is fitted with 15/5 Amp socket and with switches for exhaust system and fluorescent light to work on 220/230 Volts A.C. Supply
    ...more
  • Fume Hood

    Fume Hood

    Get Price Quote

    We are into a business of manufacturing and offering the clients with huge range of Fume Hoods that is fabricated out of thick wooden board. It designed to throw out all toxic/harmful vapours & fumes and hence protecting costly instruments and the persons working in the lab. Outer wall is finished with sunmica and the inner portion with epoxy paint. Moreover, the working table top is acid/alkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weights. The unit is fitted with fluorescent light and a gas cock for gas/air supply. The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. It works on 220 volts AC. 50Hz supply.     Optional:   •High CFM exhaust System (for duct exceeding 10 feet in length) •S. S. Lining on work bench. •PVC Fume Duct (per ft.)   Also Available in :   1.M. S. Powder Coated 2.Stainless Steel
    ...more
  • Tissue Culture Hood

    Tissue Culture Hood

    Get Price Quote

    Item code: JCA-06Tissue Culture Hood/Aseptic Cabinet is an elegant equipment with overall dimensions 1220 x 610 x 610 mm having front horizontal swing door opening of 1050 x 405 mm (frame) fitted with transparent plexiglass. Complete with fluorescent lighting and germicidal ultra violet tube. Additional Information: Item Code: JCA-06
    ...more
  • Premium
    Fume Hood

    Fume Hood

    Get Price Quote

    • MOQ1 Piece
    • MaterialMetal
    • FinishingPolished
    • ShapeRectangular
    • ConditionNew
    • ApplicationLaboratory Use
    • Country of OriginIndia
    • SIS-1315   Laboratory fume hoods are one of the most important components used to protect laboratory personal from exposure to hazardous chemicals and agents used in the laboratory.    When used properly, they exhaust toxic, offensive or flammable materials when the containment of an experiment or procedure fails and vapors or dust escape from the apparatus being used.    Cabinet is made of Thick Ply Board / M.S Duly Powder Coated / Stainless Steel (304).   Interiors coated with Asbestos / Lead sheets and further coated with fire proof epoxy paint.    Working table upto 2 feet is covered with Glazed Ceramic Acid resistant tiles. Working table is covered with Granite/Tiles / S.S. 304.    Front door is made of 6mm clear toughened glass. Counter weight balance front door .    Vertical sliding facility & the front door can be stopped at any point.  Exhaust blower consists of single phase motor which is enclosed in a wooden casing connected with a PVC Exhaust Ducting.   OPTIONS:- Base Storage Cabinet & Fire Proof Tiles Stainless Steel Sink (Wash Basin) with water inlet outlet system Working Size:2’x2’x2’3’x2’x2’4’x2’x2’6’x2’x2’8’x2’x2’     Or ANY NON STANDARD SIZE 
    ...more
    www
  • Laboratory Fume Hoods +2

    Laboratory Fume Hoods

    25,000 - 160,000 / piece

    • MOQ1 piece
    • Country of OriginIndia
    • Availability0-100kg
    • Country of Origin110V
    • ConditionNew
    • Power1-3kw
    • Automation GradeAutomatic
    ...more
  • Fume Hood

    Fume Hood

    Get Price Quote

    Lyzer Fume Hood cabinet: Fabricated out.of thick c.r.c.a. sheet OR Wooden Board, double chamber, outer triple layer enamel painted and inner finished in apoxy & lined with compressed a asbestos sheet with strong blower exhaust system, light arrangement & counter balanced sliding sash. To work on 220 / 230V AC 50 Hz. Power plug with socket provided.Size- Wdt. Dpt. Ht. Exhaust Duct No. 12201 4' x 2.6'x 31/2'           3" dia02 5' x 3' x 31/2'             4"03 6' x 3' x 31/2'             4" 
    ...more
  • Laboratory Fume Hood

    Laboratory Fume Hood

    Get Price Quote

    • MOQ1 Piece
    • Size5-7 Feet
    • air velocity0.3 - 0.8 M/s
    • Mamimum Opening500-520 Mm
    • UsageLaboratory
    • PhaseThree Phase
    ...more
  • Fume Hood

    Fume Hood

    Get Price Quote

    Made of Mild Steel duly powder coated. Granite Working Platform. High-Speed Centrifugal Blowers. Front Sash with counterweights. Fluorescent illumination lights. Water tap and PP sink. Provision for gas and air Connection Storage cupboard. 15/5 Amp Switches and Socket.  Working Area Size 90x60x60cm.Working Area Size 120x60x60cm.Working Area Size 120x75x75cm.
    ...more
  • Tissue Culture Hood

    Tissue Culture Hood

    Get Price Quote

    Tissue Culture Hood Aseptic Cabinet is an elegant equipment with overal. Dimensions 1220 x 610 x 610 mm having front horizontal swing door opening of 1050 x 405 mm (frame) fitted. With transparent plexiglass. Complete with fluorescent lighting and germicidal ultra violet tube.
    ...more
  • Fume Hood

    Fume Hood

    Get Price Quote

    Fume Exhaust Hoods are designed to contain and exhaust toxic, obnoxious harmful vapours, mists etc. particularly for protecting laboratory personnel and equipment. A motor blower system generates negatives pressure within the encloser extracting the contaminated air from the work area and expels it into the outside atmosphere. Highly recommended in different laboratories like biochemistry, soil test, food microbiology pharmaceuticals units, printed circuit board etching and cleaning operations, miniature component assembly etc. These are capable of handling corrosive fumes of sulphuric & Hydrochloric acid etc. CONSTRUCTION: Fume Hoods are made of Stainless Steel 304 grade from outside with working space covered with stainless steel 316 Qlty. Acid resistant. The work surface is fitted with small wash basin of size 250 x 200 x 150 mm depth of Stainless Steel 316 Qlty. with good quality tap. A gas cock is also fitted for gas supply. A sliding slash made of glass moves vertically up and down with concealed counter balanced weight. Chamber is provided with Flourescent Lighting arrangement for easy working. The space underneath at the work-station is provided with storage compartment for proper uses. The front fascia is provided with a panel incorporating 15/5 Amp. socket with switches for light and exhaust system supplied with cord and plug to work on 220/440 Volt 1/3 phase 50 Hz A.C. Front opening of the Fume Hood will be H 585 x W 910 mm. Complete with Exhaust System having 38mm exhaust fan with stainless. steel deck & Duct to take out fumes
    ...more
  • Fume Hood

    Fume Hood

    Get Price Quote

    • MaterialMetal
    • ApplicationLaboratory Use
    • FinishingPolished
    • Height5ft
    • Weight50-100 Kg
    • We have gained huge accolades in the market for providing finest quality Fume Hood. Fume Hood that we offer is extensively used in laboratories, clinics, hospitals etc. among others. Supreme quality, sturdy structure and longer service life are synonyms to the range of Fume Hood dispatched by us. Specifications : Manufactured using thick wooden board Designed to throw-out all toxic/harmful vapors & fumes thus providing protection to the instrument and the labor Working table top is acid/alkali resistant and a small wash basin with connections facilitated for inlet and outlet of water Front facing panel is fixed with 15/5 Amp socket with switches for fluorescent light and exhaust system Outer is finished with Sunmica and inner epoxy painted The unit is fitted with fluorescent light and a gas cock for gas/air supply Front door moves vertically up and down with concealed counter balanced weights Suitable to work on 220/230 volts A.C supply Space beneath the work station is equipped with storage compartment Working Chamber Size : 3 x 2x 2 4 x 2 x 2 5 x 2½  x 2½ Optional Accessories : PVC Fume Duct (per ft.) High CFM exhaust system (for duct exceeding 10 feet length) S.S. Lining on work bench
    ...more
  • Lab Fume Hood

    Lab Fume Hood

    100,000 / Piece

    • Power SourceElectric
    • Speed1440 RPM
    • Frequency50/60 Hz
    • Voltage220/230V AC
    • PhaseSingle Phase
    ...more
  • Premium
    Fume Hood

    Fume Hood

    Get Price Quote

    • SizeCustom
    • Number Of FlowerFume Hood
    • MaterialMetal
    • ShapeRectangular
    • ApplicationLaboratory Use
    • FinishingPolished
    ...more
    www
  • Fume Hood

    Fume Hood

    Get Price Quote

    We Manufacture Fume Hood that is fabricated out of thick wooden board. It is designed so as to throw-out all toxic/harmful vapors & fumes thus protecting costly instrument and the persons working in the lab. Outer part is finished with Sunmica and inner is epoxy painted. Working table top is acid/alkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weights. The unit is fitted with fluorescent light and a gas cock for gas/air supply. The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. The space beneath the work station is provided with storage compartment for general purpose. It is ideal to work on 220/230 volts A.C. Supply. Working Chamber Size3’ x 2’x 2’4’ x 2’x 2’5’ x 2 ½â€™x 2 ½â€™ OptionalHigh CFM exhaust system (for duct exceeding 10 feet length) S.S. Lining on work benchPVC Fume Duct (per ft.)
    ...more
  • Tissue Culture Hood

    Tissue Culture Hood

    Get Price Quote

    we are offering tissue culture hood. tissue culture hood made of sun mica clad thick wooden board and sun mica clad working top. the unit has frame at front fitted with transparent flexi glass and has an arrangement for keeping the door open if desired. fitted with u.v. germicidal light and one fluorescent tube. optional: exhaust system stainless steel top sunmica top.
    ...more
  • Stainless Steel Fume Hood

    Stainless Steel Fume Hood

    Get Price Quote

    Our company offers a wide range of Stainless Steel Fume Hoods. The range of Stainless Steel Fume Hood made available by us is constructed using mild steel and is covered with SS sheet outer. The company makes Stainless Steel Fume Hoods available at the best prices in the market. Features Thick Mild Steel square pipe framework covered with SS sheet outerWorktable covered with SS 304 Sheet sinkProvided with water tap connectionProvision of water outletHeavy duty motor and blower assembly for roper exhaust Chamber Size 90 × 60 × 75 cm120 × 75 × 75 cm150 × 75 × 90 cm
    ...more
  • Fume Hood Model MIC-11720

    Fume Hood Model MIC-11720

    Get Price Quote

    • ModelMIC-11720
    • Safety FeatureEngineered For Laboratory Safety
    • Air Quality FeatureRemoves Harmful Fumes And Vapors
    • Workspace SecurityProvides A Secure Workspace
    • Optimize laboratory safety and air quality with our Fume Hood. Engineered to capture and remove harmful fumes and vapors, it provides a secure workspace for chemical processes, ensuring the well-being of laboratory personnel.
    ...more
  • Fume Hood

    Fume Hood

    Get Price Quote

    We are into a business of manufacturing and offering the clients with huge range of fume hoods that is fabricated out of thick wooden board. It designed to throw out all toxicharmful vapours & fumes and hence protecting costly instruments and the persons working in the lab. Outer wall is finished with sunmica and the inner portion with epoxy paint. Moreover, the working table top is acidalkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weights. The unit is fitted with fluorescent light and a gas cock for gasair supply. The front facing panel is fitted with 155 amp socket with switches for exhaust system and fluorescent light. It works on 220 volts ac. 50 hz supply. features: easy installation high load bearing capacity shear strength
    ...more
Filter by Locality
top