FeaturesAll wetted pump components shall be constructed from stainless steel AISI 304 so that liquids that are compatible with AISI 304 material can suitably be pumped
The LCR, LCRI, LCRN pumps are non-self-priming Pressure Booster Pump. The vertical in-line design enables the pump to be installed in a horizontal plane single system where the suction and discharge connections are in the same horizontal plane (in-line) and have the same pipe sizes. This design provides a more compact pump design saving space and easy pipe work. Pressure Booster Pump consists of a base and a pump head. The chamber stack and the outer sleeve are secured between the pump head and the base by means of tie bolts. All pumps are equipped with a maintenance-free mechanical shaft seal of the bellow type as standard. These pumps are available in various material versions according to the pumped liquid.
APPLICATION
Water supply
Filtration and transfer at waterworks
Distribution from waterwork
Pressure boosting in high-rise buildings, hotels, etc.
Pressure boosting for industrial water supply
Industry Pressure boosting in…
Process-water systems
Washing and cleaning systems
Vehicle washing tunnels
Fire-fighting systems
Liquid transfer in…
Cooling and air-conditioning systems (refrigerants)
Boiler feed and condensate systems
Machine tools (cooling lubricants)Aquafarming Transfer of…
Oils and alcohols
Acids and alkalis
Glycol and coolantsWater treatment
Ultra-filtration systems
Reverse osmosis systems
Softening, ionizing, demineralizing systems
Distillation systems
Separators
Swimming bathsIrrigation
Field irrigation (flooding)
Sprinkler irrigation
Drip-feed irrigation
FEATURES
The LCR pumps are non-self-priming, vertical multistage centrifugal pumps.
The pump consists of a base and a pump head. The chamber stack and the outer sleeve are secured between the pump head and the base by means of tie bolts.
The base has suction and discharge connections on the same level (in-line).
All pumps are equipped with a maintenance-free mechanical shaft seal of the cartridge type as standard
LCR, LCRI and LCRN pumps are fitted with a totally enclosed, fan-cooled, 2-pole motor with principal dimensions in accordance with the EN standards.
Electrical tolerances according to EN 60034.
The LCR, LCRI, LCRN pumps are non-self-priming Pressure Booster Pump. The vertical in-line design enables the pump to be installed in a horizontal plane single system where the suction and discharge connections are in the same horizontal plane (in-line) and have the same pipe sizes. This design provides a more compact pump design saving space and easy pipe work. Pressure Booster Pump consists of a base and a pump head. The chamber stack and the outer sleeve are secured between the pump head and the base by means of tie bolts. All pumps are equipped with a maintenance-free mechanical shaft seal of the bellow type as standard. These pumps are available in various material versions according to the pumped liquid.
APPLICATION
Water supply
Filtration and transfer at waterworks
Distribution from waterwork
Pressure boosting in high-rise buildings, hotels, etc.
Pressure boosting for industrial water supply
Industry Pressure boosting in…
Process-water systems
Washing and cleaning systems
Vehicle washing tunnels
Fire-fighting systems
Liquid transfer in…
Cooling and air-conditioning systems (refrigerants)
Boiler feed and condensate systems
Machine tools (cooling lubricants)Aquafarming Transfer of…
Oils and alcohols
Acids and alkalis
Glycol and coolantsWater treatment
Ultra-filtration systems
Reverse osmosis systems
Softening, ionizing, demineralizing systems
Distillation systems
Separators
Swimming bathsIrrigation
Field irrigation (flooding)
Sprinkler irrigation
Drip-feed irrigation
FEATURES
The LCR pumps are non-self-priming, vertical multistage centrifugal pumps.
The pump consists of a base and a pump head. The chamber stack and the outer sleeve are secured between the pump head and the base by means of tie bolts.
The base has suction and discharge connections on the same level (in-line).
All pumps are equipped with a maintenance-free mechanical shaft seal of the cartridge type as standard
LCR, LCRI and LCRN pumps are fitted with a totally enclosed, fan-cooled, 2-pole motor with principal dimensions in accordance with the EN standards.
Electrical tolerances according to EN 60034.
FeaturesThe pump construction enables the rotating parts to be removed and serviced without dismantling the suction and discharge pipe work. The pump casing have material of construction of Cast Iron FG 260 or CF8.
Lubi Brand Submersible Motor is manufactured in ISO 9001 design with NEMA Standard. Submersible motor is available in Cast Iron, SS 304 & SS 316 construction. Submersible motors are built using advanced technology and components of superior quality that they ensure good mechanical strength and excellent electrical reliability. Submersible Motors are available in 50 as well as 60 Hz. Premium motors are the choice for dependable, maintenance-free operation and provide a long life for your submersible pump operation. Lubi Offers Submersible motor from 3” to 4” oil filled and from 3” to 10” water filled up to 250 HP
application
Water supply
Irrigation
Civil
Industrial
Fire fighting
3”, 4” & 6” Oil filled submersible motor.
Completely rewindable.
Cooling and lubrication by non toxic fluid.
Stainless steel outer shell and shaft.
Maintenance free lubricated ball bearings.
Mechanical shaft seal (Carbon/Ceramic) provided.
High efficiency electrical design (lower operating cost).
Tropicalized design (lower winding temperature).
Single phase motors are permanent split capacitor motors.
All single phase motors will require control box.
NEMA coupling flange.
Pressure compensation diaphragm
4” & 6” Water filled submersible motor.
Easily rewindable (wet wound) induction motor with PE insulated windings.
Corrosion resistant stainless steel stator jacket and shaft.
Water lubricated radial and axial thrust bearings.
Counter thrust bearing.
Motors are pre-filled with clean water + Glycol mixture.
High efficiency electrical design (lower operating cost).
Tropicalized design (lower winding temperature).
4” Single phase motors are capacitor start and run design.
All 4” single phase motors will require control box.
Pressure compensation diaphragm
NEMA coupling flange.
4″ & 6” Water filled stainless steel submersible motor.
Easily rewindable (wet wound) induction motor with PE insulated windings.
Completely stainless steel AISI 304 construction.
Water lubricated radial and axial thrust bearings.
Counter thrust bearing.
Motors are pre-filled with clean water + Glycol mixture.
Shaft extension made of stainless steel AISI 316.
High efficiency electrical design (lower operating cost).
Tropicalized design (lower winding temperature).
4” Single phase motors are capacitor start and run design.
All 4” single phase motors will require control box.
6″ NEMA coupling flange.
Pressure compensation diaphragm
6″ , 8” & 10” Water filled heavy duty submersible motor.
Easily rewindable (wet wound) induction motor with PE insulated windings.
Corrosion resistant stainless steel stator jacket and shaft.
Water lubricated heavy duty radial and axial thrust bearings.
Counter thrust bearing.
Motors are pre-filled with clean water + Glycol mixture.
High efficiency electrical design (lower operating cost).
Tropicalized design (lower winding temperature).
NEMA coupling flange.
Pressure compensation diaphragm.
Lubi Brand Submersible Motor is manufactured in ISO 9001 design with NEMA Standard. Submersible motor is available in Cast Iron, SS 304 & SS 316 construction. Submersible motors are built using advanced technology and components of superior quality that they ensure good mechanical strength and excellent electrical reliability. Submersible Motors are available in 50 as well as 60 Hz. Premium motors are the choice for dependable, maintenance-free operation and provide a long life for your submersible pump operation. Lubi Offers Submersible motor from 3” to 4” oil filled and from 3” to 10” water filled up to 250 HP
application
Water supply
Irrigation
Civil
Industrial
Fire fighting
3”, 4” & 6” Oil filled submersible motor.
Completely rewindable.
Cooling and lubrication by non toxic fluid.
Stainless steel outer shell and shaft.
Maintenance free lubricated ball bearings.
Mechanical shaft seal (Carbon/Ceramic) provided.
High efficiency electrical design (lower operating cost).
Tropicalized design (lower winding temperature).
Single phase motors are permanent split capacitor motors.
All single phase motors will require control box.
NEMA coupling flange.
Pressure compensation diaphragm
4” & 6” Water filled submersible motor.
Easily rewindable (wet wound) induction motor with PE insulated windings.
Corrosion resistant stainless steel stator jacket and shaft.
Water lubricated radial and axial thrust bearings.
Counter thrust bearing.
Motors are pre-filled with clean water + Glycol mixture.
High efficiency electrical design (lower operating cost).
Tropicalized design (lower winding temperature).
4” Single phase motors are capacitor start and run design.
All 4” single phase motors will require control box.
Pressure compensation diaphragm
NEMA coupling flange.
4″ & 6” Water filled stainless steel submersible motor.
Easily rewindable (wet wound) induction motor with PE insulated windings.
Completely stainless steel AISI 304 construction.
Water lubricated radial and axial thrust bearings.
Counter thrust bearing.
Motors are pre-filled with clean water + Glycol mixture.
Shaft extension made of stainless steel AISI 316.
High efficiency electrical design (lower operating cost).
Tropicalized design (lower winding temperature).
4” Single phase motors are capacitor start and run design.
All 4” single phase motors will require control box.
6″ NEMA coupling flange.
Pressure compensation diaphragm
6″ , 8” & 10” Water filled heavy duty submersible motor.
Easily rewindable (wet wound) induction motor with PE insulated windings.
Corrosion resistant stainless steel stator jacket and shaft.
Water lubricated heavy duty radial and axial thrust bearings.
Counter thrust bearing.
Motors are pre-filled with clean water + Glycol mixture.
High efficiency electrical design (lower operating cost).
Tropicalized design (lower winding temperature).
NEMA coupling flange.
Pressure compensation diaphragm.
Stainless steel submersible Pump 100% made out of high grade stainless steel they can withstand the harsh abrasive and corrosive environment during its life span. The octagonal rubber bearings and built in sand protection shields are designed to ensure that sand is removed from the pump and motor by the water that is being pumped. Submersible pumps made out of materials other than stainless steel can run very well in cold, clean & clear water. However ground water contains abrasives like sand which can quickly wear out both the pump & motor. Lubi has hence designed & developed the J & W series Stainless steel Submersible Pump which made completely out of high grade stainless steel & rubber of premium quality to ensure that the suspended particles do not wear out the pump.
APPLICATION
Water supply
Irrigation
Civil
Industrial
Fire fighting
FEATURES
Meeting all your water pumping needs
Material & Design for wear & corrosion resistance
Minimum cost of ownership
Low Installation costs
Application assistance
Reliable consistent Performance
Customized pumping solution
Stainless steel submersible Pump 100% made out of high grade stainless steel they can withstand the harsh abrasive and corrosive environment during its life span. The octagonal rubber bearings and built in sand protection shields are designed to ensure that sand is removed from the pump and motor by the water that is being pumped. Submersible pumps made out of materials other than stainless steel can run very well in cold, clean & clear water. However ground water contains abrasives like sand which can quickly wear out both the pump & motor. Lubi has hence designed & developed the J & W series Stainless steel Submersible Pump which made completely out of high grade stainless steel & rubber of premium quality to ensure that the suspended particles do not wear out the pump.
APPLICATION
Water supply
Irrigation
Civil
Industrial
Fire fighting
FEATURES
Meeting all your water pumping needs
Material & Design for wear & corrosion resistance
Minimum cost of ownership
Low Installation costs
Application assistance
Reliable consistent Performance
Customized pumping solution
Lubi brand Horizontal split case pump useful for high flow water pumping. Horizontal split case pump ideally suitable for industrial community water pumping, lift irrigation, Fire fighter and water distribution. The pumps are non self priming horizontal split case pumps with radial suction port and radial discharge port. The double suction design helps pump to balance the forces on impeller and split case design offer fast maintenance & lower down time. The pumps have horizontal pump shaft and the volute casing can be dismantled in the horizontal plane along the drive shaft. Horizontal split case pumps are available in two main designs. 1) Single stage 2) Two stage
APPLICATION
Water works.
Fire – Fighting.
Water Circulation.
Air Conditioning Plants.
Processing Plants.
suitable for Paper, Sugar & Textile Mills
Power Plants.
Storm water.
Sprinkler irrigation.
Waste Water Treatment Plants.
Fertilizer Plants.
FEATURES
The pumps are non self priming horizontal split case pumps with radial suction port and radial discharge port.
Standard flanges for suction and discharge ports will be PN 16 as per DIN standard EN 1092-2, PN 25 as per DIN standard EN 1092-2, ANSI 125 and ANSI 250 as per ASME B16.1 are available on request.
These pumps are long coupled pumps with TEFC squirrel cage induction motor with main dimensions complying to IEC standards and mounting designation B3 (IM 1001).
These pumps are available with gland packing as well as mechanical shaft seal.
These pumps have the discharge range from 20 to 1320 m鲁/hr and head range from 4 to 88 metres. Motor ratings are from 3 to 160 kW.
The pump impellers are dynamically balanced to grade 6.3 of ISO 1940.
These pumps can be supplied as a complete unit with motor, pump, coupling, coupling guard and fabricated steel base frame.
These pumps are available with our standard range of EFF2 motors. They can also be supplied with EFF1 motors on request.
The split case construction enables removal and dismantling of the internal pump parts e.g. bearings, wear rings, shaft seal and impeller without disturbing the motor & pipe work
Lubi brand Horizontal split case pump useful for high flow water pumping. Horizontal split case pump ideally suitable for industrial community water pumping, lift irrigation, Fire fighter and water distribution. The pumps are non self priming horizontal split case pumps with radial suction port and radial discharge port. The double suction design helps pump to balance the forces on impeller and split case design offer fast maintenance & lower down time. The pumps have horizontal pump shaft and the volute casing can be dismantled in the horizontal plane along the drive shaft. Horizontal split case pumps are available in two main designs. 1) Single stage 2) Two stage
APPLICATION
Water works.
Fire – Fighting.
Water Circulation.
Air Conditioning Plants.
Processing Plants.
suitable for Paper, Sugar & Textile Mills
Power Plants.
Storm water.
Sprinkler irrigation.
Waste Water Treatment Plants.
Fertilizer Plants.
FEATURES
The pumps are non self priming horizontal split case pumps with radial suction port and radial discharge port.
Standard flanges for suction and discharge ports will be PN 16 as per DIN standard EN 1092-2, PN 25 as per DIN standard EN 1092-2, ANSI 125 and ANSI 250 as per ASME B16.1 are available on request.
These pumps are long coupled pumps with TEFC squirrel cage induction motor with main dimensions complying to IEC standards and mounting designation B3 (IM 1001).
These pumps are available with gland packing as well as mechanical shaft seal.
These pumps have the discharge range from 20 to 1320 m鲁/hr and head range from 4 to 88 metres. Motor ratings are from 3 to 160 kW.
The pump impellers are dynamically balanced to grade 6.3 of ISO 1940.
These pumps can be supplied as a complete unit with motor, pump, coupling, coupling guard and fabricated steel base frame.
These pumps are available with our standard range of EFF2 motors. They can also be supplied with EFF1 motors on request.
The split case construction enables removal and dismantling of the internal pump parts e.g. bearings, wear rings, shaft seal and impeller without disturbing the motor & pipe work
End Suction Pump 60 Hz
LES are single-stage End-suction pump according to ISO 2858. Our range also includes several models of pumps which have been developed with duty condition which are not covered in ISO 2858. The volute casing of End suction pump is designed to be robust in construction to take the undue stresses offered by the pipe work. They have an axial suction port and radial discharge port. Standard flanges are PN 16 as per DIN standard EN 1092-2 and PN 25 as per DIN standard EN 1092-2. ANSI 125 and ANSI 250 as per ASME B16.1 are available on request
APPLICATION
Water Supply.
Pressure boosting for high rise buildings, hotels industry etc.
Industrial washing & cleaning systems.
Fire Protection systems.
Cooling & Air Conditioning systems.
Boiler feed and condensate transfer system.
Irrigation systems for fields including sprinkler & drip
irrigation systems
FEATURES
The pumps are non self priming horizontal end suction pumps with axial suction port and radial discharge ports.
Standard flanges for suction and discharge ports will be PN 16 as per DIN standard EN 1092-2, PN 25 as per DIN standard EN 1092-2, ANSI 125 and ANSI 250 as per ASME B16.1 are available on request.
Performance and dimensions comply to ISO 2858.
These pumps are close coupled pumps with TEFC squirrel cage induction motors with main dimensions complying to IEC standards.
These pumps are available with mechanical shaft seal only.
These pumps have the discharge range from 3 to 660 m鲁/hr and head range from 4 to 158 meters. Motor ratings are from 0.37 to 132 kW.
The pump impellers are dynamically balanced to grade 6.3 of ISO 1940.
These pumps are available with our standard range of motors complying with EFF2 motors. They can also be supplied with EFF1 motors on request.
End Suction Pump 60 Hz
LES are single-stage End-suction pump according to ISO 2858. Our range also includes several models of pumps which have been developed with duty condition which are not covered in ISO 2858. The volute casing of End suction pump is designed to be robust in construction to take the undue stresses offered by the pipe work. They have an axial suction port and radial discharge port. Standard flanges are PN 16 as per DIN standard EN 1092-2 and PN 25 as per DIN standard EN 1092-2. ANSI 125 and ANSI 250 as per ASME B16.1 are available on request
APPLICATION
Water Supply.
Pressure boosting for high rise buildings, hotels industry etc.
Industrial washing & cleaning systems.
Fire Protection systems.
Cooling & Air Conditioning systems.
Boiler feed and condensate transfer system.
Irrigation systems for fields including sprinkler & drip
irrigation systems
FEATURES
The pumps are non self priming horizontal end suction pumps with axial suction port and radial discharge ports.
Standard flanges for suction and discharge ports will be PN 16 as per DIN standard EN 1092-2, PN 25 as per DIN standard EN 1092-2, ANSI 125 and ANSI 250 as per ASME B16.1 are available on request.
Performance and dimensions comply to ISO 2858.
These pumps are close coupled pumps with TEFC squirrel cage induction motors with main dimensions complying to IEC standards.
These pumps are available with mechanical shaft seal only.
These pumps have the discharge range from 3 to 660 m鲁/hr and head range from 4 to 158 meters. Motor ratings are from 0.37 to 132 kW.
The pump impellers are dynamically balanced to grade 6.3 of ISO 1940.
These pumps are available with our standard range of motors complying with EFF2 motors. They can also be supplied with EFF1 motors on request.
FeaturesThese are High Head Pump with better discharge, Noryl Impeller with High Grade Engineering Plastic, Aluminium die cast body with excellent asthetic & colour. Light weight for easy handling
Flow rate up to 90 l/min (5.4 m³/h)Dynamic head up to 40 m.
APPLICATION
• clean liquids without abrasives, which are non-aggressive for the pump materials.• water supply.• As pressure boosting pumps for central water systems.• civil ad industrial applications.• watering gardens.• irrigation.
FEATURES
Other voltages.Available in three phase.Special mechanical seal.Higher liquid or ambient temperatures.Available in 60 Hz.
Flow rate up to 90 l/min (5.4 m³/h)Dynamic head up to 40 m.
APPLICATION
• clean liquids without abrasives, which are non-aggressive for the pump materials.• water supply.• As pressure boosting pumps for central water systems.• civil ad industrial applications.• watering gardens.• irrigation.
FEATURES
Other voltages.Available in three phase.Special mechanical seal.Higher liquid or ambient temperatures.Available in 60 Hz.
The Lubi LCF pumps are Self Priming Centrifugal Feed Pump for Reverse Osmosis (RO). Motor and pump are close coupled in a convenient and compact design for quick installation in limited space. The pumps have axial suction port and radial discharge port .
APPLICATION
• Reverse Osmosis (RO) systems• For clean liquids without abrasives, which are non-aggressive for the pump materials. (solids content up to 0.2%)• For water supply.• For heating, cooling, air-conditioning and circulation plants.• For civil and industrial applications.• For pressure boosting.• For watering gardens.
FEATURES
OPERATING CONDITIONS
Flow range : Up to 3.5 m³/hHead range : Up to 35 metresAmbient temperature : Max. +50°C Liquid temperature range : 0°C to +90°C
MOTOR
• 2-pole induction motor, 50 Hz (n = 2900 RPM)• Single phase 230V +5% -15% with thermal protection.• Insulation class F.• Protection IP 44.• Constructed in accordance with IEC 34.
The Lubi LCF pumps are Self Priming Centrifugal Feed Pump for Reverse Osmosis (RO). Motor and pump are close coupled in a convenient and compact design for quick installation in limited space. The pumps have axial suction port and radial discharge port .
APPLICATION
• Reverse Osmosis (RO) systems• For clean liquids without abrasives, which are non-aggressive for the pump materials. (solids content up to 0.2%)• For water supply.• For heating, cooling, air-conditioning and circulation plants.• For civil and industrial applications.• For pressure boosting.• For watering gardens.
FEATURES
OPERATING CONDITIONS
Flow range : Up to 3.5 m³/hHead range : Up to 35 metresAmbient temperature : Max. +50°C Liquid temperature range : 0°C to +90°C
MOTOR
• 2-pole induction motor, 50 Hz (n = 2900 RPM)• Single phase 230V +5% -15% with thermal protection.• Insulation class F.• Protection IP 44.• Constructed in accordance with IEC 34.
Lubi manufactures wide range of Submersible Pump with the help of innovative technology and latest CNC machines. Lubi produces reliable and quality products. These water pump and motor are as per international standard like CE. The Submersible pump range is manufactured in different type of materials and thus is divided in different types which are Stainless Steel Submersible Pump, Cast Iron Submersible Pump, Noryl Submersible pump. Lubi offers Noryl pump in 3” & 4”. High operating efficiencies of Noryl pumpset result into high water discharge rate and lower power consumption. The pump sets are compact and slim & can be easily installed in narrow wells.
FEATURES
All pumps have been designed using computational fluid dynamics to ensure maximum efficiency.
All pumps are designed using material which can work with sand found in the borewell.
All journal bearing and impeller wear rings are made of nitrile rubber to ensure that performance of pumps remain the same over a period of time.
On all bronze impeller are available in stainless steel to provide high abrasion resistance to sand found in bore well.
All pumps are provided with upthrust bearing to control axial movement of the impeller assembly during transportation as well as start-up.
Low friction non-return valve is provided on all pumps to reduce water hammer when the pump is stopped.
All Impellers are individually balanced to G 6.3 of ISO .
The entire shaft is protected by stainless steel which can be easily replaced when they wear out during maintenance.
All components are machined using state of the art CNC machines to ensure high dimensional accuracy which gives a longer life to the pump
APPLICATION
Water supply
Irrigation
Civil
Industrial
Fire fighting
Lubi manufactures wide range of Submersible Pump with the help of innovative technology and latest CNC machines. Lubi produces reliable and quality products. These water pump and motor are as per international standard like CE. The Submersible pump range is manufactured in different type of materials and thus is divided in different types which are Stainless Steel Submersible Pump, Cast Iron Submersible Pump, Noryl Submersible pump. Lubi offers Noryl pump in 3” & 4”. High operating efficiencies of Noryl pumpset result into high water discharge rate and lower power consumption. The pump sets are compact and slim & can be easily installed in narrow wells.
FEATURES
All pumps have been designed using computational fluid dynamics to ensure maximum efficiency.
All pumps are designed using material which can work with sand found in the borewell.
All journal bearing and impeller wear rings are made of nitrile rubber to ensure that performance of pumps remain the same over a period of time.
On all bronze impeller are available in stainless steel to provide high abrasion resistance to sand found in bore well.
All pumps are provided with upthrust bearing to control axial movement of the impeller assembly during transportation as well as start-up.
Low friction non-return valve is provided on all pumps to reduce water hammer when the pump is stopped.
All Impellers are individually balanced to G 6.3 of ISO .
The entire shaft is protected by stainless steel which can be easily replaced when they wear out during maintenance.
All components are machined using state of the art CNC machines to ensure high dimensional accuracy which gives a longer life to the pump
APPLICATION
Water supply
Irrigation
Civil
Industrial
Fire fighting
Secondary Business TypeManufacturer / Exporters / Wholesale Suppliers
Opening Hours
SUN : Closed
MON : 9:30 AM - 6:30 PM
TUE : 9:30 AM - 6:30 PM
WED : 9:30 AM - 6:30 PM
THU : 9:30 AM - 6:30 PM
FRI : 9:30 AM - 6:30 PM
SAT : 9:30 AM - 6:30 PM
Established in 1965 with a cast-iron foundry, located in heart of Gujarat India. This cast-iron foundry in span of 5 decade grew to evolve into state of art high technology 150 mio USD group. ISO 9001 Certified Factory within house designed foundry which makes it a unique pumps manufacturing company producing more than 4500 variety of water pumps & Motor. Lubi has flexibility to design and develop customized product to suite customer requirements. With dedicated team of over 2500 people, Lubi hold capacity to manufacture 700000 Units annually and manufacturing space of 300,000 square meters. Wide ranges of products are certified with CE or UL certificate and having a five star energy efficiency rating certified by BEE. With over 1000 dealers and 18 branches across the country today LUBI is market leader in more than 80 countries Our aim is to provide comprehensive pumping solution with superior quality & energy efficiency and becoming a world’s largest exporter. We are also committed to green environment movement by offering and continuously improving energy efficiency.
Reviews & Ratings
Write a Review
Post Free Ad