Marine Equipment Dealers in Bapu Nagar, Ahmedabad

• Packaging Type: Carton

• OMP Motor: BMR Motor
• OMS Motor: OMT Motor

we are offering hydraulic motors. hydraulic motor india we are dealing & equivalent replacement of hydraulic product like: sauer danfoss hydraulic motor danfoss hydraulic motor m+s hydraulic motor intermot hydraulic motor zihyd hydraulic motor sai india hydraulic motor kawasaki hydraulic motor eaton hydraulic motor parker hydraulic motor sai hydraulic motor jmdg hydraulic motor bosch rexroth hydraulic product range yuken hydraulic product range hydraulic motor - radial piston motors - orbital motors - gear motors - axial piston motors hydraulic pumps - gear pump - axial piston pump - variable piston pump - load sensing pump power packs - hydraulic manufacturing power pack - dc power pack - ac power pack hydraulic valves - solenoid operated direction control valves - hand operated direction control valves - check valves line mounted , sub plate mounted - pilot operated check valves threaded and sub plate mounted - pressure relief valves direct operated - pressure relief valves pilot and solenoid operated - low noise relief valves - back pressure valves - unloading relief valves - pressure reducing valves - sequence valves - balance valves - throttle and check valves - pressure compensated flow control valves - cam operated direction control valves - over center valves - modular pressure control valves - modular flow control valves pressure compensated - modular compound valves - modular direction control valves - zero leaque valves - threaded cartridge valves - propotional pressure relief valves - propotional pressure and flow control valves (pq blocks )

• Usage/Application: Paper Industry, Textile Industry,Lamination Industry, Packaging Industry,Plastic and Film
• Length: upto 6 Mtr.
• Brand Name: Anar
• Color: Black, Blue
• Size: Dia. 75 mm to 250 mm
• Temperature: upto 350 deg. celsius
• Surface Treatment: Rubber Coating
• Capacity: Length Upto 6 Mtr.
• Base Materials: M.S / S.S
• Working Load Limit: upto 3 Tons
• Diameter: 80-250 mm
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

• Color: Black,Blue,Grey, Brown
• Material: M.S,S.S,Rubber
• Diameter: upto 350
• Usage/Application: Textile,Plastic,Paper Industries
• Brand Name: Anar
• Working temperature: -10 to + 110 Degree C
• Length available: 70 mm- 3000 mm
• Shaft diameter: 35 to 60 mm
• Packaging Details: Standard
• Payment Terms: L/C (Letter of Credit)/T/T (Bank Transfer)

• Color: Black
• Hardness: 20-80 Shore A
• Material: Rubber
• Temperature: -100 to 280 Degree C
• Packaging Type: Plastic Bag

• Type: Diaphragm Valve
• Material: Stainless Steel
• Color: Silver
• Application: Fittings
• Pressure: Medium
• Feature: Accurate dimension, Easy to install, Robust construction

Reckoned for our extensive array of products, we efficiently serve our customers from Ahmedabad(India). We are supported by a reliable team of packaging experts who have immense experience in this domain and capable of catering to the standards and customized packaging requirements.

• Brand Name: CREST
• Material: CS ASTM A 216 GR. WCB

Since 22 years, we are manufacturing gateglobecheckballnrvstrainer valves. We are supply this material in all over the india.

• Brand Name: SIMEX
• Material: Cast Carbon Steel, CF8, CF8M
• Media: OIL, GAS STEAM, WATER
• Port Size: 1' To 450mm
• Place of Origin: INDIA
• Pressure: ASA 150# & ASA 300#
• Temperature Of Media: 500°F, 800°F

What is the gate valve?? How it works??? What are the applications of it??? Generally the gate valve is designed to start or stop flow, and when a straight-line flow of fluid and minimum flow restriction is needed. In service, these valves generally are either fully open or fully closed. Simex offers the gate valves to meet with the rising demands of industries. This valve has inside a gate that moves up-down perpendicular to the flow of the service. In the up position it will open and closed in the down position. The flow is straight through, and does not lend itself for use as a metering valve. The Gate valve is also available different types of Disc-Gate such as Double Disc Gate, Solid Gate, Flexible Gate, Parallel Slide Gate, Conduit Gate etc.

• Brand Name: VQ
• Material: C.I.; WCB; S.S.304; S.S.316
• Pressure: ND-16; ND-40; 150#; 300#
• Port Size: 25-300

Globe Valve Flange End M.O.C.: C.I.; WCB; S.S.304; S.S.316 Size: 1'' to 12'' Pressure: ND-16; ND-40; 150#; 300#

• Weight: 5Kg, 10kg
• Packaging Type: Wooden Box
• Structure: U Section
• Valve Size: 1inch, 1/2inch
• Voltage Range: 24 V AC
• Brand Name: SRK
• Material: Stainless Steel
• Color: White
• Finishing: Coated
• Diameter (mm): 40 Mm, 50mm
• Overall Length: 6-10 Inch
• Specialities: Non Breakable, Investment Casting, Heat Resistance, Durable, Casting Approved
• Diametre (milimetre): 100 To 1000 Mm
• Type: Industrial Valves
• Condition: New
• Automatic Grade: Manual

• Material: Rubber
• Color: As per requirement
• Brand Name: Arihant
• Usage/Application: Industrial
•  :  
•  :  

We are counted amidst the well-reputed Globe Valve Manufacturers and Suppliers in India. Customers from every nook and comer of India are placing bulk orders for the Globe Check Valve due to the unmatched quality and inexplicable performance in respective applications. The use of optimum quality materials in the manufacturing of the Globe Control Valve also ensure notable features like high durability, tensile strength and resistance to adverse conditions. Further to meet the requirements of the application, the Globe Check Valves are available in varied sizes and dimensions.

• BODY MATERIAL: CAST IRON, CAST CARBON STEEL (ASTM A 216 GR. WCB), FORGED CARBON STEEL (ASTM A 105), CF8 (SS 304), CF8M (SS 316), CF3M (SS 316L), SS 202, ALLOY STEEL & OTHERS.
• DESIGN: RISING SPINDLE, JACKETED, EXTENDED STEM & GEAR OPERATED , PNEUMATIC CYLINDER OPERATED ,
• End Connection: SCREWED, SOCKET WELD, FLANGED END, BUTT WELD END, RTJ.
• PRESSURE RATING CLASS: ASA 150, 300, 600, 800, 900, 1500, 2500, BS 10 TABLE D, E, F, H, ND 16, ND 40.
• Size Range: 15mm TO 400mm

The Globe Valve offered by us is used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Because of their spherical body shapes, these valves are named as Globe Valves. Our range of Globe Valve is widely appreciated by the customers owing to their high quality and durability.   Features - Durable- Highly efficient- Reliable performance- Precision engineered

  GV 20-300 Oil-sealed rotary vane vacuum pumps, 20-365 m³/h, 12-215 cfm Pump capacity: 0,30 - 6,08 m³/min

The globe valve is used for throttling flow control.  Shut off is accomplished by moving the disc against the flow stream rather than across it as in the case with a gate valve. The globe valve is an excellent valve to use for on-off service, but is highly suited for frequent cycling and control of fluids anywhere in amount or volume between the open and closed positions. OPERATING PRINCIPLES :- This is a valve which entails multiple turns during hand operation. It is basically a linear action valve that has a piston or disk which seats on a single shaped seat or flat.     They are mainly used to control the opening and closing of fluid flow.In the plumbing industry, globe valves are used to tightly seal when fully closed.This controls high pressure fluid streams in pipes. Fluid pressures vary from time to time while flowing. The valves have a stem that is vertically positioned in the body of fluid flow to control the changes in pressure. It has a globe-shaped body that is mainly separated by an inner baffle. It is the baffle which controls the flow and has two parts: ring shaped seat and the flat plug. we offer metal seatings so that the seating stress must not only high ,but also circumstantially uniform to achieve the desired degree of fluid tightness. SALIENT FEATURES : Body & Bonnet made from high quality casting with liberal sections. The castings are precision machined for high performance Rising Stem & Rising Hand Wheel Construction. Die moulded Graphite (Grafoil) Packing Rings, controlled clearance between stem, gland and bonnet bushing for guaranteed low emissions and also suitable for higher temperature. Deep stuffing box is providing for tightness and maximum long packing life. Swinging Eye Bolts facilitate easy access to the stuffing box. Back seating feature facilitates repacking of the stuffing box on line with the valve in fully open position. Seat Ring Screwed in to the body (Replaceable Type) or integral type. Stellited Disc, Seat Ring & Back Seat can also be offered on special request. Higher Pressure & Higher Size Valves are provided with Thrust Bearings and also with Gear drive arrangements.   SPECIAL OPTIONS :  Angle & Y Type Design Available Parabolic, Regulating, Guided & Soft Seating Disc (Plug) available Extended Bonnet design for low temperature and cryogenic services. Gland Seal Design (Water Seal) With Lantern Ring Non-Rising Hand Wheel on special request Bolted Bonnet / Pressure Seal Bonnet Gear / Pneumatic Cylinder / Electrical Actuator Operated Locking Arrangement With NACE MR 0175 Tailor Made Valve MATERIAL OF CONSTRUCTION:- Cast Iron                                : IS 210 Gr FG 200Cast Carbon Steel               : ASTM A 216 Gr WCBCast Stainless Steel            : ASTM A 351 Gr CF 8/CF 8MForged Carbon Steel          : ASTM A 105Forged Stainless Steel       : ASTM A 182 Gr F304 / F316End Connection                   : Screwed AS PER BSP/BSPT/NPTSocketweld                           : AS PER ANSI B 16.11Flanged                                 : AS PER ANSI B 16.5Pressure Rating              : ASA 125#, 150#, 300#, 600#, 800#, PN 16 & PN 40Engineering Option             : Gear Operated, Electrical Actuated,Size Range                           : 15mm to 300 mm   DESIGN & TESTING INTERNATIONAL STANDARD: Valve Design        : BS 5351 / ANSI B 16.34 / API 6DPressure Testing     : BS 6755-IFace To Face       : ANSI B 16.10Flange Drilling     : ANSI B 16.5 / BS 10 Table / DIN / IS 6392Butt Weld End      : ANSI B 16.25Socket Weld End     : ANSI B 16.11Screwed End        : ANSI B 1.20.1(BSP/NPT)

Backed by years of industry experienced we are engaged in offering a premium quality range of M.S. & E. N series ship shaft. The provided ship shaft is manufactured by our expert end using the best grade raw materials and advanced technology. Owing to its optimum strength and rigid construction the provided ship shaft is highly acknowledged by our clients.In order to provide the best quality our experienced quality control team will test this ship Shaft on various stages of Quality parameters. The size is available from diameter 100 mm to 1000 mm. To fulfill the diversified needs of patron we offer M.S. & E. N series ship shaft in numerous specification at reasonable price in market.

CASING :- Casing of tower is made of fiber glass/reinforced plastic. The cooling tower is designed and constructed for minimum maintenance and long life. You can operate in aggressive environment & resistant water born contaminats. P.V.C. FILL :- A pre-eminent quilaty and long life fill consists of modular block of PVC honey combs construction to create prolonged contact time of hot air with water for maximum heat transfer. The air pressure drop through the fill is negligible. SPRINKLER :- The uniform distribution of water over the honey combs fills this sprinkler, rotates by self propulsion and eliminates the need for atomising the water nozzles. The head side includes ball bearing requiring minimum maintenance. MOTOR :- Electo Magnetic designs of the entire range of New India and Bharat Motor covered by 3N series have been developed in keeping with the Latest national and international practices and confirm in general to 1 EC recommendations. FAN :- An aero-dynamically designed axial flow type fan is a well balanced construction. The fan blades are of case aluminium alloy. Fan with variable pitched blades is dynamically balanced for low vibration and high efficiency. Nozzles :- Nozzles are constructed of Brass/Plastic Nylon used in cooling tower. The design ensures a fine water spray system. CONSTRUCTION MATERIALS Top Section : Fiberglass Reinforced Plastic Casting : Fiberglass Reinforced Plastic C.W.Basin : Fiberglass Reinforced Plastic Fill : Regid P.V.C. H.W.Inlet & C.W.Outlet : Steel HDG Fan Blade : Aluminium/Fibre BranchArm : Polypropylene Motor Support : Steel HGD Hardwear : G.I./HGD Corrosion Free : To avoid corrosion on metal in water lines. Inspection Window : For Inspection of running position of sprinkler and fan blade. After Sale Service: After sales service for all cooling tower is guaranteed to all users. Our service enigineers are available at any time to assist consulting engineer, tower owners and tower operators.  Round shape Cooling Tower CapacitiesRound shape cooling tower gives 100% cooling efficiencies it’s give good appearance flow rate from 5 M³/Hr To 550 M³/Hr gives differences in temperature 4ºC To30 ºC Availability of Capacities from 5 TR T0 600 TR.FeaturesThe bottle shaped FRP cooling tower is utilized in several industries and has the following features. • All the components have a modular and compact design• The casing and the design has an exclusive circular design. Therefore no impact of the direction of prevailing wind is encountered.• This FRP water cooling tower has a very efficient sprinkler head system that is rotative and is made of aluminum alloy• Axial flow fans that are designed aerodynamically with adjustable pitch are used• The bottle shaped FRP cooling tower helps conserve power• Quiet operation is ensured• The sump is given easy access with a galvanized mesh of hot dip. This is done to avoid entry to foreign objects into the water basin• The possibility of corrosion and rust gets minimized due to the framework steel components that are galvanized hot dip Though the cooling tower maintenance is not difficult, it is important.Cooling Tower Maintenance• Efficient treatment of water• Prevent scale deposits• Do way with or clean spray nozzles that get clogged• Adequate air flow should be ensured• Adequate performance of pump also should be assuredRound shape Cooling Towers Spares• PVC Fill : A good quality fill and is of long life too.• Drift Eliminator: The carry over losses due to moisture drops.• Sprinkler: Due to the even water distribution over the honey comb fills.• Fan: flow type fan that is aero dynamically designed is of well balanced construction. we have availability of FRP fan and Aluminum fan

Shrenik Steel Corporation We are a unique entity in the industry, actively committed towards trading and supplying an alluring range of Ship Shaft.MS & EN Heavy Ship Shafting, EN Series Heavy Forged Round BarOwing to our enriched industrial experiences, we are devoted towards trading a wide variety of excellent quality MS & EN Heavy Ship.Backed by a team of adroit professionals, we are manufacturing, trading and supplying an extensive array of Heavy Ship Shaft,Our company is dedicatedly engaged in presenting a qualitative range of Heavy Ship Shaft. Additionally, vendors’ quality auditors test this Heavy Ship Shaft on varied parameters of dimensions.

• Shape/Size: 80 mm to 825 od, From Dia. 100 mm to 1200 mm.

MS & EN Heavy Ship Shafting, EN Series Heavy Owing to our enriched industrial experiences, we are devoted towards trading a wide variety of excellent quality MS & EN Heavy Ship Shafting, EN Used Ship Shafting, Propeller Used Shafting, Hot Rolled Round Bar, Forged Round Bar, M. S. Round Bar, Steel Used Shafting. We are offering our clients Ultra A grade Quality of Ship Round Bars used for precision work and accuracy. We offer a wide range of size and material grade of round bars, EN series and alloy steel. MS & EN Heavy Ship Shafting, EN Series Heavy Forged Round Bar Owing to our enriched industrial experiences, we are devoted towards trading a wide variety of excellent quality MS & EN Heavy Ship.

Salient Feature Meets design requirement of ASME B 16.34 / API 600 / API603 /API 6D and testing requirement API 598 / BS 6755 / API6FA / ISO 5208 Outside Screw and Yoke Construction Valves provided with back seating arrangement Solid, flexible, split wedge and parallel slide are available Renewable, seal welded seat ring or integral seat ( Cast SS. only ) available. Specially designed die formed graphite packing, controlled clearance between stem, gland and bonnet bushing for guaranteed low emissions meet 100 PPM maximum fugitive emission levels. Anti - friction ball thrust bearing in yoke sleeve for higher size and classes Grub Screw : Secures yoke nut in the bonnet Gress Nipple : Supplies lubricant to the mating parts Flanged End or butt welding end Flanged end dimensions conform to ANSI / ASME B 16.5 / API 605 / DIN / BS 3293 Butt welding end dimensions conform to ANSI / ASME B 16.25 Face to Face and End Dimensions conform to ASME / ANSI B 16.10 / DIN / BS 2080 Bi - directional shut-off. Option Extended bonnet provided for low temperature and cryogenic services (cold box and non cold box applications) to conform to requirement of BS-6364 Deep stuffing box - with lantern ring Self - aligning two piece gland Gear Box / Chain Wheel design available Electric or pneumatic actuator design available Ring joint facings available in higher classes Locking arrangement optional By-Pass, Drain Plug design available Stellited seating hard facing are provided on request Alloy-20, Monel, Hstelloy B & C, CF3 & CF3M Materials on request Application Petrochemical Industries Pharmaceutical Plants Oil Industries Petroleum Refinery Power Plants Thermal & Gas Fertilizers & Agro Chemicals Steel Plant Paper Industries Cement Industries Cryogenic Services

Banana Roller we offer is the best of its kind available in the market. Banana Rollers are extensively in the Textile, Plastic & Paper industries. Fulfilling the needs of various industries, the Banana Rollers have earned huge appreciation from the clients. Banana Rollers are obtainable at market leading prices and in tamper proof packing. Used For : Removing the crease & tightening the Clothes, Plastic & Paper. Specifications Size : 3"Diameter up to 10"Length : 50 mm to 6000 mm

With rich industry experience and knowledge, we are providing an excellent quality range of All types of Fittings.  

This Section Having the range of all types of Etched Yantras in 3'' & 6'', Meru Yantras and Sampurna Mahayantras with yantras of all the forms of Dus Maha Vidhya, Planets, Devis & also includes yantras for health, wealth & Success. Meru Yantras in Gunmetal, Gold Plated, Crystal Meru Yantra, Agate and Big Pieces Meru Yantras. Sampurna Mahayantra are the combination of yantras in one plate making it a combination of various yantras in 9 inch and 12 inch. Locket yantras for wearing in neck.

• Model NO: SE-05

Features STARTEK Cast Steel Gate Valves have been designed to meet the requirements of API 600 - ISO 10434 / BS 414/API 603/API 6D-IS014313/ASMEB 16.34 Face to Face and End to End dimensions conform toASME B16.10/ ISO 5752/ BS 20801 DIN End flange dimensions conform toASME B16.5/ ISO 7005-1/API 605/ BS 3293/ DIN Butt weld end dimensions conform to ASME 816.25 The stem nut design allows for the removal of the hand-wheel while keeping the Stem and Gate in a fixed position. Anti-frictional Ball bearings are provided in higher sizes and classes. The strength of Stem to Gate connection is stronger than the strength of the Stem at the root of the operating thread Outside screw and yoke construction All the valves provided with backseat arrangement The gland is of self aligning two piece type Bi-directional shut-off Deep stuffing box Body ports are streamlined, permitting unobstructed flow, reduces turbulence, results in lower pressure drop and lower erosion The Seat-rings are cylindrical bottom seated type having ample cross section for strength are provided with welded in and threaded Seat-rings will be supplied on request. In case of SS valves the Seat-rings are integral to Body The Body to Bonnet joint is fiat in ISO PN 20 /ASME 150# valves, a male and female joint is used in PN 50 300# & PN 1101 600# and ring joint is used in higher classes Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 771312 Option 4 Solid, flexible, split wedge, double disc and parallel Slide Gate configurations available For low temperature and cryogenic services (cold box and non-cold box applications) extended bonnet as per BS 6364 available 4 Locking arrangement Gear,Electrical, Hydraulic or Pneumatic actuator available. Materials Part Name Material Option Body   ASTMA216 WCB/A217 WC 6 /A217 WC9IA 217 C5 /A217 C12 /A351 CF8 /A351 CF8M/A 351 CF3 / A351 CF3M / A 352 LCB Bonnet   ASTMA216 WCB/A217 WC6 /A217 WC9 /A217 C5IA 217 C12 /A351 CF8 /A351 CF8M /A351 CF3I A351 CF3M IA 352 LCB Wedge   ASTMA216 WCB/A217 WC6 /A217 WC9 /A217 C5IA 217 C12 /A351 CF8 /A351 CF8M /A351 CF3/ A351 CF3M IA 352 LCB Stem   ASTM A276410 1A276304 /A 276304L /A276316 Seat Rings   ASTMA216 WCB/A217 WC6 /A217 WC9 /A217 C5IA 217 C12 /A351 CF8 /A351 CF8M /A351 CF3I A351 CF3M /A 352 LCB Back Seat Bushing   ASTM A276410 /A276 304L / A276 316L Gland   ASTM A276410 1A276304L1A276316L Gland Flange   Carbon Steel / Stainless Steel Stem Nut   ASM A439 Gr. D2 /Al. Bronz Lock Nut   Carbon Steel / SS 304 Gland Packing   Graphite Asbestos / Graphoil / PTFE Bonnet Gasket   Corrugated Soft Iron / Corrugated SS /Spiral Would SS 304 with Asbestos or Graphoil / Octagonal Ring Gland Eye - Bolt & Nut   Carbon Steel / Stainless Steel Cross Bolts & Nuts   Carbon Steel / Stainless Steel Hand Wheel   Carbon Steel Hand Wheel Nut   Carbon Steel Grease Nipple   Carbon Steel Grub Screw   Carbon Steel Studs / Bolts   ASTM A193 B7 / A 193 B7M IA 193 BBM /A320 L7 Nut   ASTMA1942H/A1948/A1948M/A1944 /7

• Body: S.S.304 / S.S.316
• Size: 1/2" to 4"
• Bonnet: S.S.304 / S.S.316
• Seat: NBR / VITON

Direct Activated Pressure Reducing Valve directly opens and close valve gate by the outlet pressure. When outlet pressure is under setting pressure,Valve gate automatically opens, to make valve gate fully open,adjustable pressure range and setting pressure are relative points.