Moisture Instruments Dealers in Ahmedabad

Dew point is defined as the temperature at which the water vapor pressure of a gas equals the saturated water vapor pressure. It is therefore the temperature at which condensation "just begins" to occur if a gas is cooled. Dew point is a fundamental unit and directly equivalent to water vapor pressure or parts per million. It is a very convenient measure of actual water content of a gas because it is not a function of temperature in the same way relative humidity is. Knowing the compressed air dew point is critical to many processes. Excessive moisture can result in poor product quality, significant downtime, or corrosion and damage to critical equipment resulting in expensive repairs and lost revenue. To minimize moisture problems, reliable on-line dew point measurement is a must.

Using a speedy moisture meter, the moisture content of soils, sand and other fine-grained material can be obtained quickly with reasonable accuracy. The test technique is based on the fact that water will react with calcium carbide to form acetylene gas and the quantity of gas formed is directly proportional to the water present, leaving a surplus of the chemical used in the test. The quantity of acetylene gas produced is indicated on a built-in pressure gauge, which is calibrated in percentage of moisture on wet weight basis. Range : 0-25% Gauge Division 1% Range : 0-50% Gauge Division 1%

We are one of the leading supplier, exporter and service provider of the various parameters of humidity meters in India. These meters are highly appreciated in the market for their efficiency, robustness, accurate results and durability. Moreover, these are widely supplied to various industries for material testing and quality control tests. Our Company follows the Standard Quality Management system as mandated for its regulation act. The offered humidity meter supplier is specifically designed keeping in mind the standards of the market using excellent quality of the material. This humidity meter is valued among customer due to its superior finish. Customers can easily avail this humidity meter from us in a confine them at nominal rates.

Model TL-101 With 2 pin type Electrode for testing Moisture content in cotton bale. With NIMH Re-chargeable Battery. Provided in a Carry Case Meter Model TL-102 With 2 pin type Electrode for testing Moisture content in cotton bale. With feather touch selection facility for testing of Cotton, wool, Viscose & polyester. With NIMH Re-chargeable Battery. Provided in a Carry Case Optional Electrodes available as under Roller type electrode for checking of Moisture in Moving Fabrics Two short Pin type electrode for checking of Moisture in Raw Cotton.

AIR-300: The AIR-300 is a microprocessor based air quality monitor/controller sensitive to a wide variety of air pollutants. FEATURES True Air Quality Monitor Microprocessor based controller Analog Stepped Output (ASO) 10 bit resolution Able to detect one in 15 m3 (530 cu. ft.)room Integral sensitivity adjustment Ability to directly control air handling unit Visual indication of air quality (internal) APPLICATIONS Schoolrooms Office buildings Parking garages Washroom ventilation fans smoke detectors DESCRIPTIONThe AIR-300 is a microprocessor based air quality monitor/controller utilizing a hot wire element sensor based upon the Taguchi principle. This is a full spectrum sensor sensitive to a wide variety of air pollutants such as carbon monoxide, smoke, benzene, alcohols, hydrogen, hydrocarbons, esters, etc.This sensor is better suited to measuring air quality than a sensor which measures only Carbon Dioxide. The AIR-300 yields a true indication of the actual air quality, rather than occupancy. For example, if a person were to smoke a in a room, the carbon dioxide sensor would be inadequate in detecting this, even though the air quality had significantly degraded. This same set of circumstances holds true for many other contaminants such as Solvents, Fuels, and even Carbon Monoxide, all of which are much more harmful than Carbon Dioxide.When measuring Air Quality, it is not so much the type of contaminant that is of concern, but rather the presence of any contaminants. This sensor does not indicate which contaminant is in the air, but indicates the presence and quantity of any contamination.The Greystone AIR-300 monitor/controller works by looking at the signal from a full spectrum sensor, automatically compensating for temperature and humidity effects, and judging the degree of pollution. For the unit to perform efficiently it must work as a monitor/controller, i.e. it must be able to act upon level changes. The output is represented as an analog, stepped or relay output with user adjustable settings. This output can be used to directly control an actuator, or be sent back to a Building Automation System (BAS).The AIR-300 can be configured to run in auto or manual mode and has an integral sensitivity adjustment to provide the user with the optimum settings to monitor a specified area. There are internal LED indicators to show microprocessor status and also a manual override feature to assist in installing the unit.

  Key Features  10 article memories, each containing 100 storage locations Different electrodes are available as per material Can calibrate itself automatically depending on the selection of fibre or blend

Features Supplied With solid state electronic Regulator Very easy to operate Accuracy of 0.2% by direct reading and 0.1% by estimation Complete with 'L' Bend thermometer with pans cap. Applications   This is very reliable and sturdy instrument for an accurate determination of the moisture content of materials which do not undergo chemical change, when exposed to infra red radiations. The instrument is specially useful for the substances, which quickly reabsorbs moisture after drying. Observations can be taken quickly and the results obtained are accurate.

Shimadzu-unibloc-electronic-moisture-balance-moc12h shimadzu-unibloc-electronic-moisture-balance-moc12h supports large sample pan to be placed for the best drying condition. Shimadzu-unibloc-electronic-moisture-balance-moc12h reliable unibloc weighing mechanism and unique conditions auto-tare system assure accurate measurements. Large sample pan and continuous auto-tare mechanism a large pan sample pan contribute to accurate measurements,but the larger heat capacity of oit normally results in a larger zero drift in the precious weighing mechanism which eliminates the zero drift continuously and assures high accuracy ,even with larger sample pan. Unibloc technology for precision weighing shimadzu’s unibloc cell is used as the core mechanism of the weighing part. Its uniform structure maintains the high performance of precision weighing under repeated heatingcooling mid-wave infrared quartz heater min-wave infrared quartz provides effective drying for a wide range of sample.besides the excellent drying performance ,it offeres a long operational life of 20,000 to 30,o00 hours.therefore the long term operation cost is much lower then halogen lamp heaters. Predictive measuring mode : the final result can be predicted from the drying process saving time in repeated from the drying process,saving time in repeated measurements. Windowsdirectwindowsdirect complete sample data and instrument setting can be directly typed into any application on windows and no interface software is required

dew point transmitters The exact monitoring of dew point temperature in compressed air systems, dryers for plastic and other industrial processes is becoming increasingly more important. EE371 series with a measuring range - 80 60°CTd (-112 140°FTd) and EE372 serieswith a measuring range- 40 60°C Td (-40 140°F) are the ideal solution for such applications. The core of the transmitter is the monolithic measurement cell type HMC01, developed by E+E Elektronik in thin-film technology. An autocalibration procedure which is integrated in the device and years of experience in low humidity adjustment make an accuracy of

Continuous particulate air monitors have been used for years in nuclear facilities to assess airborne particulate radioactivity (APR). In more recent times they may also be used to monitor people in their homes for the presence of manmade radioactivity. These monitors can be used to trigger alarms, indicating to personnel that they should evacuate an area. Our low profile fixed filter monitor designed to continuously collect and measure the quantity of radioactive beta particulates or gamma iodines in the sample stream. The system will monitor radioactive airborne levels in either working spaces, or via a process tubing connection to a remote stack, duct or other air space. SYSTEM FEATURES: System Skid Assembly, fully wired & plumbed. Measurement of alpha and/or beta particulate. Beta Scintillation Detector or Gamma Scintillation Detector. Isotopic Check Source (optional). Detachable head assembly for remote monitoring. Fixed filter or moving filter configurations available. Full alpha spectral analysis with unique radon-thoron peak fitting algorithm. Preamplifiers/HV Supply. Display and Control Units.

Our Dew Point Pressure Transmitter is highly demanded for offering accurate pressure measurement results. Dew Point Pressure Transmitter, offered by us is easy to operate and remains in use for a long time. Brand Name E+E Click Here For More Details

Application : Used for fast and accurate measurement of moisture and temperature in the process of allotment, acquisition, storage, packed grains, feedstuff, powder etc. Technical Details : Measurement range: moisture content 8-20% Temperature –10-55 Resolution: 0.1 Moisture: ±0.6%(UNDER 14%) ±0.8%(15%-18%) ±1(OVER 18) Temperature: ±0.8oc Grains: paddy, rice, corm, wheat Calibration: Automatic Uses Microcomputer LSI circuit and crystal time base that offers high accuracy measurement range & high resolution. Wide measuring range & high resolution. With HOLD function for easy read-out of data and viewing maximum value. Self-test function or self-calibration. Features extremely fast, accurate display and reading with no guessing or errors. Compact, light weight and easy operation. The use of durable, long lasting components including a strong, light weight ABS plastic housing assures maintenance free performance for many years. The housing has been carefully shaped to fit comfortably in either hand.