Muffle Furnace Dealers in Vatva, Ahmedabad

• Type: Automatic
• Material: Iron, Stainless Steel
• Certification: CE Certified
• Application: Heating Process
• Voltage: 220V
• Warranty: 1 Year

MODE OF HEATING :Rasayan muffle furnace is double walled convection heated unit. Outer body of the unit are made of heavy gauge CRC sheet duly pretreated with primers rust free well finished powder coated. The inner chamber made of special design ceramic material. The gap between both chambers filled with high density sera wool for super fast heating & reduces heat loss & power consumption.Other Details : Heating : Indirect heating system provided in our units compressing of air heater made of heavy gauge A-1 grade nicrom wire of suitable wattage (silicon carbide rod heating also available at optional.) Front Panel : Front panel of our unit comprise of ON/OFF switch, temperature controller, main cord, heater indication lamp etc. Features : Microprocessor based four digit seven segment Dual digital display type PID controller for accurate temperature controlling. Dual display upper display shows actual temperature & lower display shows set point High density sera wool insulation permits faster heat up, reducing heat loss & energy consumption Embedded heating element on top, bottom and both sides improves temperature uniformity Side opening door doubles as a shelf for loading and unloading Door safety switch stops power to heating elements when door is opened. (Optional) Thermocouple break protection cuts power to heating elements, preventing a •thermocouple failure runaway condition 0.95 cm (0.38 in) diameter port in chamber rear for monitoring temperatures with independent measuring devices Includes: Thermocouple, line cord and plug Alarm : Audio visual alarm facility when process complete at optionalTemperature Control / Range : Temperature Range: +5°C to 1000°C or 1100°C or 1200°CTemperature Sensitivity: +/- 2° c or betterOptional : PPI PID based programmable controller with original sensor Temperature Accuracy: < 0.5 °C: -Rate:

The Muffle Furnace, provided by us, is acclaimed for its sturdy and high durability. Our company has a convenient and noncomplex payment procedure. Patrons can make payments through a method with they are comfortable. We are open to receiving payment online or offline. In order to keep our offerings in safe and secure conditions, we have developed a storage unit and keep it updated with the defined industry standards.

A muffle Furnace In Historical Usage Is A Furnace In Which The Subject Material Is Isolated From The Fuel And All Of The Products Of Combustion Including Gases And Flying Ash. After The Development Of High-temperature Electric Heating Elements And Widespread Electrification In Developed Countries, New Muffle Furnaces Quickly Moved To Electric Designs. Today, A Muffle Furnace Is A Front-loading Box-type Oven Or Kiln For High-temperature Applications Such As Fusing Glass, Creating Enamel Coatings, Ceramicsand Soldering And Brazing Articles. They Are Also Used In Many Research Facilities, For Example By Chemists In Order To Determine What Proportion Of A Sample Is Non-combustible And Non-volatile . Some Digital Controllers Allow RS232 Interface And Permit The Operator To Program Up To 126 Segments, Such As Ramping, Soaking, Sintering, And More. Also, Advances In Materials For Heating Elements, Such As Molybdenum Disilicide, Can Now Produce Working Temperatures Up To 1,800 Degrees Celsius Which Facilitate More Sophisticated Metallurgical Applications. The Term Muffle Furnace May Also Be Used To Describe Another Oven Constructed On Many Of The Same Principles As The Box Type Kiln Mentioned Above, But Takes The Form Of A Long, Wide, And Thin Hollow Tube Used In Roll To Roll Manufacturing Processes. Both Of The Above Mentioned Furnaces Are Usually Heated To Desired Temperatures By Conduction, Convection, Or Blackbody Radiation From Electrical Resistance Heating Elements. Therefore There Is (usually) No Combustion Involved In The Temperature Control Of The System, Which Allows For Much Greater Control Of Temperature Uniformity And Assures Isolation Of The Material Being Heated From The Byproducts Of Fuel Combustion.

Double Walled with double insulation for minimum heat leakage & faster temp. Rise. The outer casing made of thick CRC Powder coated. Heating chambers consist of rectangular horizontal totally enclosed muffle bracket. Heating elements are made of Nichrome Kanthal wise wounded externally on the muffle.

system status- Digital Temperature controller- Micro processor based double display PID controller Heating- Through high grade nichrome wire Air circulation- ----------- Temperature range- Ambient to 950°C Temperature least count- 0.1°C Accuracy- ± 0.5°C Timer- Micro processor based double display digital timer (Optional) Timer range- 999.9 Seconds, Minutes or Hours Safety MCB- Available on electrical panel

Double walled with double insulation for minimum heat leakage & faster temperature rise. The outer casing made of thick CRC powder coated Heating chambers consist of rectangular horizontal totally enclosed muffle bracket Heating elements are made of Nichrome/Kanthal wise wounded externally on the muffle Temperature controlled by Micro Processors based Digital temperature Indicator cum Controller with CS/AI sensor. Maximum temperature 1000 Deg.C. working temp. 900 Deg.C. Various models with different temperature ranges are available.

This Furnace is used in different types of Laboratory experiments. This Muffle is well known in dental laboratory. Inherent features of this product are : Robust MS shell to withstand continuous operation. Heating elements operating on low surface load for longer elements life and continuous trouble free furnace operation. Refractory and insulation of high quality bricks / ceramic fiber for energy conservation. Heat loss prevention by Ceramic Fiber rope for door. Perfect temperature uniformity in the furnace useful space. Automatic temperature control by digital controller. Electrical switch gear items of reputed make, along with controller housed in aesthetic control panel. Safety interlocks and protection devices for safe furnace operation. Areas of application : Used in Heat Treatment, Laboratory Experiment, and Dental Laboratory Experiment based Applications Chamber Sizes Available in 3 sizes (9” x 4” x 4”) (10” x 5” x 5″) (12″ x 6″ x 6″) Heating Medium : Electrical Temperature Ranges : Up to 1000°C Control Panel Thyristor based Power Control Panel. Temperature Based Power Control Panel.

• Type: Muffle Furnace
• Material: Aluminum, Iron, Stainless Steel
• Color: Black, Blue, Brown, Green, Red, White
• Voltage: 220V
• Condition: New
• Application: Heating Process
• Driven Type: Electric
• Temperature: 0-1000 Degree C, 1000-2000 Degree C

• Power: Electronic
• Application: heating and melting

Construction Made of Heavy Gauge Mild Steel (M.S.) With Microporcessor based Digital Temperature Controller Cum Indicator. Maximum Temperature 900 C 1100 C. Working Size : - (1) 9" x 4" x 4" (2) 10" x 5" x 5" (3) 12" x 6" x 6" (4) 18" x 9" x 9"

We offer Muffle Furnace.

• Power Source: Electric
• Automation Grade: Automatic
• Color: White
• Use: Laboratory

horizontal sealed retort furnace, Pusher Furnace, Salt Bath Furnace

Muffle Furnaces, pvc pipe testing equipment, Opacity Testers, Water Baths

Universal tensile tester, Notch Cutter, VSP-HDT Tester, Cof Tester

Electric Ovens, Electric Diffusion Furnaces, Chamber Kilns

heating block, Laboratory Instruments, soxhlet extraction