Sanghavi Group Makarba, Ahmedabad, Gujarat

MYMIX Sealer 210 is a liquid with specialized formulation (water based) to seal the porosity of all types of concrete surfaces. MYMIX Sealer 210 has unique water repellent properties that acts as invisible barrier and provides resistance to moisture and reduce staining, effect of efflorescence, while allowing vapour to escape. advantages: Acts as a penetrating sealer Preserves the natural look Ready-mix & easy to use U. V. transparent and non-yellowing Can be applied on Interior and exterior surfaces Method of Application: Clean the surface with a dry cloth and start applying the sealer with the help of a normal paint brush or with cotton cloth with strokes in single direction covering the surface uniformly. Allow the surface to touch dry before application of the second coat. The time between two coats should be approx 15-30 mins. After the second application allow the surface to dry again naturally. Clean excess sealer from the concrete surface or stone with the help of a dry cotton cloth. If needed buffing has to be done. Protect the surface for curing, taking care that no traffic is allowed on the floor area till the prescribed time limit which is 24 to 72 hrs for curing. Area of Application: All kinds of natural stones, marbles, granites, limestone, bricks and concrete products. Packing Details: Available in 500m1, 1 Liter, 5 Liter, 20 Liter. Bigger packingsizes are available on request. Shelf Life: Best before 12 months from the date of manufacturing, in unopened condition and stored in dry area. Avoid directsun light. Coverage Approx. 65 to 75 sq. ft. per litre (two coats).  

UTA (Universal Tile Fixing Adhesive) Product Decription: "MYMIX – UTA (Universal Tile Fixing Adhesive)" is a Cementitious ready mix which is a thin bed polymer modified tile adhesivefor interior and exterior application. Its unique properties make it ideal for fixing ceramic tiles, vitrified tiles, natural stones and granite to most building substrates Application: Specially for interior & exterior floors and walls installations All types of tiles and stone Enquiry Advantages: Easy to Apply, Single component adhesive More open time Dual purpose for floor and wall with good adhesion workability Suitable Substrates: Concrete wall and floor area Brick Masonry Cement mortar beds High Shear Bond Strength Superior adhesion for porcelain and vitrified tiles Tile‐on‐tile application Cement Plaster Thin-set Cementitious Screeds Packing: 25 kg bag and Project packing of 40 kg bag is available on demand Colour: Available in Grey & White Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area How to apply: Add 25 kg of “MYMIX‐UTA (Universal Tile Fixing Adhesive)” to approx. 6.5 to 7.5 liters Of cool and clean tap water and stir properly for 5 minute by hand or an electric stirrer to get a smooth and homogeneous mixture After stirring wait for 10 minutes, stir once again and apply the adhesive on the subfloor with the recommended adhesive notch trowel Press the tiles within 15 to 20 minutes with a shuffling movement onto the adhesive. Check regularly to ensure that the back of the tile is in full contact with the adhesive. Remove excess adhesive immediately from the joints The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish. The surface should be flat with a tolerance of 4mm over a distance of 2 meters. It is essential to waterproof wet areas prior to tiling. New concrete is recommended to be 1 month old for every 25mm thickness and completely dried before tiling Under normal circumstances, i.e. a temperature of 20°C and a relative humidity of 65%, the joints may befilled after minimum 24 hours

STA (Stone Tile Adhesive) Product Descrption: "MYMIX - STA (Stone Tile Adhesive)" is a polymer modified heavy duty thin-set adhesive for fixing vitrified tiles, natural stones, Marble, granite for interior and exterior floor and wall applications as well as building facades. High flexibilityand superior bond strength makes "MYMIX - STA" the best choice for vertical stone cladding. Application: Specially for interior floors and walls Small and medium size tiles fixing For Internal use and External use Advantages: Single component adhesive mixed with water High bond Strength Suitable for exterior application of various tiles & stones High flexible adhesive   Non‐Skid adhesive Water – resistance properties Long open time with good workability Suitable Substrates: Concrete Cement Plaster Cement mortar beds Brick Masonry Ceramic tile & stone Cement Terrazzo Concrete masonry Gypsum wall board (Interior application) Suitable for vertical cladding of vitrified tile and stones` How to Apply: Planning your layout is essential. Choose your starting point to create a balanced visual appearance. Trowelling should be done horizontally. Spread the adhesive on to the wall, working on small areas at a time. Tiles must be fixed before the surface of the adhesive forms a skin. The tile is then adjusted to its final position with an up & down movement so that full coverage is obtained to the back of the tile. The size of trowel used should be approximately as mentioned. Add 25 kg of “MYMIX ‐ STA (Stone Tile Adhesive)” to approx. 6.5 liters. To 7.5 liters. Of cool and clean tap water and stir properly for 5 minute by hand or an electric stirrer to get a smooth and homogeneous mixture. After stirring wait for 10 minutes, stir once again and apply the adhesive on the subfloor with the recommended adhesive notch trowel Press the tiles within 15 to 20 minutes with a shuffling movement in to the adhesive. Check regularly to ensure that the back of the tile is in full contact with the adhesive. Remove excess adhesive immediately from the joints The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish. The surface should be flat with a tolerance of 4mm over a distance of 2 meters. It is essential to waterproof wet areas prior to tiling New concrete is recommended to be 1 month old for every 25mm thickness and completely dried before tiling. Under normal circumstances, i.e. a temperature of 20°C and a relative humidity of 65%, the joints may be filled after minimum 24 hours. Packing: 25 kg bag and Project Packing of 40 kg bag is available on demand Colour: Available in Grey & White Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturingin unopened condition stored in dry area

RITEPOXY GLITTER STARTM Stain - free Grout   RITEPOXY GLITTER STARTM Grout is epoxy base tile grout designed specially for floor & wall areas, where aesthetics is of utmost importance such as hotels, restaurants, kitchens, showrooms, living room, swimming pools & Shopping Mails. RITEPOXY GLITTER STARTM is a three component epoxy based grout and easy to mix joint filler available in 24 shades in Gold, Silver and Copper finish.   Features : For interior and exterior floors and walls Colour fast and 100% Stain free Available in Gold, Silver and Copper colour finish Chemical Resistant with non-toxic properties Anti-bacterial and Anti-fungal Strong, durable and easy to clean Ideal for waterproof grouting Application Preparation : Clean application area & remove dirt, dust & excess adhesivefrom tile joints. Mix Part A & Part B in a bucket thoroughly and slowly add Part C (filler Powder) to make a homogenous mixture. Using rubber float fill-up the tile joints. Wait for 30-45 mins for joints to harden. Begin initial clean-up with water & gently use scrub pad in circular motion to remove excess material from the tile/ stone surface. Use plenty of clean water until excess grout is cleared from surface. To remove excess material from the tile surface use wet towel at 45 degree to the grout joints. Wait for 2-3 hrs before giving smooth finish to grout surface with a sponge & hand-glove finger with mild shampoo water. Wait for 24 hrs and finally clean the surface with water to remove the epoxy marks. Surface is now ready to use. Area of Application : Swimming Pools Lounges Residential and commercial Coverage : Varies with width and depth of joint. Packing Detail: Available in 1 kg and 5 kg units Shelf Life : 24 months from the date of manufacturing.

SLU (Self Leveling Underlayment) Product Description: "MYMIX - SLU (Self Leveling Cement based Underlayment)" is a blend of specially selected cements, graded aggregates, synthetic polymers and workability aids. It is supplied as a dry powder requiring only, the addition of water to produce a smooth free flowing and self leveling smoothing coat, which can be laid to a feather edge. When thickness greater than 10mm is required, washed concrete sand can be added in equal proportions (if sand is added the product becomes trowellable and is no longer self leveling). Advantages: Easy to use, simply add measured Quantity of water Time saving, Self levelling giving quick easy lying Excellent Bond, content ensures built in adhesion and a firm bond to substrate Rapid Hardening, Enables early fixing of floor covering Application: For leveling out uneven RCC floor surfaces prior to covering with floor finishes. e.g. tiles, carpeting, linoleum, rubber and other sheet flooring How to Apply: Clean Application Area from dust & grease Pour 4.5 to 5.5 litre water in a bucket Add 25 kg product in the Bucket Mix thoroughly preferably with mechanical stirrer or manually Do not mix more material that can be laid in 10 minutes Ensure that next mix is ready to pour without any interval Pre‐wet application area, avoid direct sunlight Pour the prepared mix on to the substrate with trowel Do not attempt to float the setting surface If mix stiffens before it has been spread it must be discarded Wait for 24 hours before use Packing: 25 kg bag and Project packing of 40 kg bag is available on demand Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area.

Product Description: "MYMIX - PPR (Plaster)" is a strong durable pre-mixed powder/render with high quality polymer additives suitable for plastering over all types of concrete surfaces (old or new), clay bricks, fly ash bricks and ACC blocks. It is normally applied to masonry interiors and exteriors to achieve a smooth and even surface. "MYMIX - PPR (Plaster)" contains processed and fine graded sand which gives better quality of plaster.   Advantages: Under coating and plastering over existing concrete and brick/block walls Use as a leveling plaster for correction of surface undulation in bare concrete block and other cementitious substrates Basic leveling of concrete, light weight blocks and bricks Filling holes and irregularities, leveling walls and ceilings Create a leveled surface from uneven masonry or concrete wall Least rebound loss in comparison to traditional plastering Minimizes cracking & shrinkage free Saves both manpower & time with better work yield per day Suitable Substrates: Masonry Wall AAC Block wall RCC wall surfaces Enquiry How to Apply: Surface should be cleaned by removing Dirt, soil and roof runoff stains Start at the top and wash the dirt (pre‐wetting of surface) down the wall before applying plaster Proper hacking is to be done prior to application in concrete surface Take 5 to 5.5 litre of water on a bucket and gradually add MYMIX‐ PPR (25 kg) in it. Approx. ration 20 – 22% by weight Mixing can be done manually or by electrical stirrer (for better result) till homogenous mix is obtained. After proper mixing leave the paste for 5 to 10 minutes for polymeric dispersion before application Use mixture within 1 hour of preparation of mix. Hard & set plaster should not be mixed again Correct ratio of water and PPR is essential for better results

Product Description: "MYMIX - NMF (Floor Hardener)" is a ready to use non-metallic floor hardener based on very high quality natural hard non metallic aggregates. These aggregates play an important role in attributing properties of abrasion and wear resistance.It renders tough, wear resistant, dust free, anti—skid, long lasting and maintenance free floors. It bonds monolithically to the base concrete and is suitable for existing as well as new floors. Suitable Substrates: Concrete floors, residential & commercial area All types of cementitious screeds Advantages: Hardwearing and dust proof floor toppings. Anti-skid and anti-slip in case of oil spillages. Good water proofing properties, hence suitable for rooms and exteriors that are constantly wet. Non-rusting and therefore trouble free Resistant to petrol, diesel and vegetable oils. Abrasion resistant is twice as good as normal concrete. Increases strength and impact resistant. Substantial increase in service life and therefore works out economical Has extremely low shrinkage. Extremely high abrasion resistance. How to Apply: NMF Floor Hardener dry mix is usually applied in two stages. The concrete / compensating under screed base should be free from excess water and sufficiently hardened to allow light foot traffic Two‐ third (about 65 ‐ 70% )of the dry mix should be sprinkled evenly by hand or scoop horizontally And once the material becomes evenly dark, it is floated by wooden float The surface should not be over worked Immediately thereafter, the remaining one – third (30 ‐35%) of the dry mix should be evenly sprinkled in the similar manner vertically, and should be spread evenly Final finish can be done by troweling to give the desired finish with power‐float The weight of power – float should not be less than 60 kg. Particular attention should be paid to edges and corners to ensure full compaction Final troweled floor surface should be cured with conventional curing methods   Packing: 25 kg. Project packing of 40 kg size is available on demand Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area.

MYMIX RITESEALTM (Waterproofing System) is powder based single component, high polymer modified, elastomeric, waterproof coating for all kind of cementitious surfaces. It has very high water permeability against hydrostatic pressure with standing capacity. It is to be mixed with water and applied by paintbrush. Suitable Substrates: All cementitious RCC plastered surfaces Interior and Exterior wet areas Coverage: Two coats 1 sq. mt./ kg. Application: Swimming pool waterproofing Toilets and bathrooms sunk area All cement based basements Overhead & Underground water tanks Roof and slabs Dam, water towers, Reservoirs and channels ACC blocks and cement boards Advantages: Excellent adhesion to cement surfaces Excellent Waterproofing and crack – over bridging ability Highly effective for positive & negative sides of hydrostatic pressure It was high water permeability and is easy to use Very good UV resistance Positive side permeability : 5 – 7 Bar Negative side permeability : 1.5 Bar Non – Toxic How to apply : Clean Application Area from dust & grease Pour 3.8 liter to 4 liter water in a bucket Add 10 kg product in the Bucket Mix thoroughly preferably with mechanical stirrer or manually Wait for 5 minutes Pre-wet application area, avoid direct sunlight Apply the paste on the surface with a brush Wait for 2 hours Apply 2nd coat to get uniform surface Wait for 24 hours before use Packing 1 kg pouch and 10 kg bag Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in

MYMIX GROUT ADMIXTURE 990 Product Description: MYMIX Grout Admixture 990 is used in place of water to improve the quality of cement grouts. It is ideal for interior and exterior tile grout application and enhances flexibility & durability to have better performance. Advantages: Reduces water absorption Increases the qualities of cement grout Colour fastness Improve the compressive strength Easy to clean Improve the flexibility and durability Area of Application: Bathrooms Kitchens Flooring Walls Interior Exterior Packing Details: Available in 200ml, 500ml, 1 Liter, 5 Liter, 20 Liter. Bigger packing sizes are available on request. Shelf Life: Best before 12 months from the date of manufacturing, in unopened condition and stored in dry area. Avoid direct sun light. Mixing: Use 3 to 3.5 Liter of MYMIX GROUT ADMIXTURE 990 for 10kgs of MYMIX CGU powder. Pour 330ml to 350ml MYMIX GROUT ADMIXTURE 990 in 1kg MYMIX CGU powder slowly. Mix slowly with slow speed stirrer to get smooth consistency. Application: Clean the surface with water and apply grout on prepared surface with any float. Check the grout paste in to the joints until completely filled. Cleaning: After 40-60 mins grouting, use damp cloth to remove the excess grout paste from the joints of tile surface and allow drying.

MYMIX BONDING AGENT APB 110 Product Description: MYMIX Bonding Agent APB 110 is a synthetic rubber compound which is mixed with all kinds of Cementitious Systems to make installation of natural stone and tiles on interior & exterior walls. It improves bond strength, thermal shock resistance and flexibility to substrate area.   Method of Application: Surface Preparation: All concrete surfaces should be clean from dust, free from contamination, efflorescence, and curing compounds Advantages: High bonding with resistance to thermal shock Increased tensile and compressive strength It is suitable for all types of tiles and natural stone Mixing: Shake well before use. Add MYMIX Bonding agent APB 110 in clean bucket, add Sand and Cement mortar (Ratio 1:1). Use approx. 15 ltrs to 50kg of Sand and Cement mortar (Ratio 1:1). Mix by hand or slow speed stirrer to get a smooth and homogeneous mixture and wait for 5 mins. Remix and apply the materials with proper notched trowel. Application: Apply material to the recommended substrate with flat side of trowel. Comb on additional material with the notched side. Press the tile/stones within 15-20 min with a shuffling movement into the adhesive. Check regularly to ensure that the back of the tile is in full contact with the adhesive. Remove excess adhesive immediately from the joints. The proper preparation of the surface will make the fixing easier and quicker  Area of Application Suitable for Interior and Exterior All types Stones for cladding Cement mortar & Screeds Used in bonding for plaster work by bond coat Can use old to new concrete substrate by bonding mortar Cement baker board Packing Details: Available in 1 Liter, 5 Liter, 20 Liter. Bigger packing sizes are available on request. Shelf Life: Best before 12 months from the date of manufacturing, in unopened condition and stored in dry area. Avoid direct sun light.

MCR (Micro Concrete) Product Detail: "MY MIX - MCR (Microconcrete)" is cementitious, non -shrink, flowable, high strength micro-concrete for structural repair with high precision concrete. It is recommended thickness is up to 40mm to 100mm. It is suitable for various structural strengthening measures such as encasement buildups, jacketing etc. Advantages: Flowable mortar eliminates honey combination High early and final strength Compensation for shrinkage and settlement in the plastic state Develops high initial and final strength Excellent resistance to moisture ingress Easy to use How to Apply: Ensure leak proof shuttering before starting work Add 4 to 4.5 liters of water for 25 kg of MCR. The approx. ratio of 16% to 18% by weiht If concrete thickness is more than 100mm, Mix 5 to 10mm pre‐washed coarse aggregate Do not use vibrators, avoid vibration for 2‐3 hours after pouring MCR Packing: 25 kg bag and Project packing of 40 kg bag is available on demand Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area.

  Advantages: Multipurpose hi‐polymer modified thin set adhesive High bond Strength Suitable for exterior application of various tiles & stones High flexible adhesive Suitable Substrates: Concrete Cement Plaster Cement mortar beds Brick Masonry   Non‐skid adhesive Water – resistance properties Batter open time with good workability   Ceramic tile & stone Cement Terrazzo Concrete Masonry Gypsum wall board (Interior application) Packing 25 kg bag and Project Packing of 40 kg bag is available on demand Colour Available in Grey & White Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area How to apply: Add 25 kg of "MYMIX - GTA (Glass Tile Adhesive) to approx. 6.5 ltrs to 7.5 ltrs of cool and clean tap water and stir properly for 5 minutes by hand or an electric stirrer to get a smooth and homogeneous mixture. After stirring wait for 10 minutes, stir once again and apply the adhesive on the subfloor with 2 mm adhesive notch trowel for glass mosaic Press the tiles within 15 to 20 minutes with a shuffling movement in to the adhesive. Check properly to ensure that the back of the tile is in full contact with the adhesive. Remove excess adhesive immediately from the joints The proper preparation of the surface will make the fixing easier and quicker, ensuring a better finish. The surface should be flat with a tolerance of 4mm over a distance of 2 meters. It is essential to waterproof wet areas prior to tiling New concrete is recommended to be 1 month old for every 25mm thickness and completely dried before tiling Under normal circumstances, i.e. a temperature of 20°C and a relative humidity of 65%, the joints may be filled after minimum 24 hours

Application : Easy Noutching

FTA (Floor Tile Adhesive) Product Description: "MYMIX ‐ FTA (Floor Tile Adhesive)" is a thin set Cementitious dry mix mortar For installing Ceramic, Vitrified tiles and natural stones for interior floor applications. "MYMIX ‐ FTA" is polymer modified tile adhesive which make it ideal for fixing tiles, natural stones and granite to most building substrates. Application: Specially for interior floors and walls Small and medium size tiles fixing For Internal use and External use Enquiry Advantages: Easy to Apply, single component adhesive Extended open time Superior adhesion properties with adhesion to varies substrates Suitable Substrates: Concrete wall and floor area Tile - on - tile aplication Cement mortar beds Dual purpose for floor and wall with good adhesion workability Suitable for solid subfloors Thin - set cementitious screeds Cement Plaster Packing: 25 kg. Project packing of 40 kg size is available on demand Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area How to Apply : Add 25 kg of “MYMIX‐FTA (Floor Tile Adhesive)” to approx. 6.5 litres. To 7.5 litres. Of cool and clean tap water and stir properly for 5 minute by hand or an electric stirrer to get a smooth and homogeneous mixture After stirring wait for 10 minutes, stir once again and apply the adhesive on the subfloor with the recommended adhesive notch trowel Press the tiles within 15 to 20 minutes with a shuffling movement in to the adhesive. Check regularly to ensure that the back of the tile is in full contact with the adhesive. Remove excess adhesive immediately from the joints The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish. The surface should be flat with a tolerance of 4mm over a distance of 2 meters. It is essential that you waterproof wet areas prior to tiling. New concrete is recommended to be 1 month old for every 25mm thickness and completely dried before tiling. Under normal circumstances, i.e. a temperature of 20° C and a relative humidity of 65%, the joints may be filled after minimum 24 hours.

RITEPOXYTM ESG 1200 (Epoxy Stain-free Grout) is designed specially for use in filling up joints of ceramic tiles, vitrified tiles and stone joints, where hygiene is of utmost importance such as bathrooms, kitchens, living room, bedroom, hospitals, laboratories, swimming pools and high traffic areas. RITEPOXYTM ESG 1200 is three component, easy to mix, chemical resistant joint filler and is available in 28 shades.   Features : Colour fast and 100% Stain free Chemical resistant with non-toxic properties Anti-bacterial and Anti-fungal Strong, durable and easy to clean Ideal for waterproof grouting Available in 28 shades Application Preparation : Clean application area & remove dirt, dust & excess adhesive from tile joints. Mix Part A & Part B in a bucket thoroughly and slowly add Part C (filler Powder) to make a homogenous mixture. Using rubber float fill-up the tile joints. Wait for 30-45 mins for joints to harden. Begin initial clean-up with water & gently use scrub pad in circular motion to remove excess material from the tile / stone surface. Use plenty of clean water until excess grout is cleared from surface. Remove excess material from the tile surface and use wet towel at 45 degree to the grout joints. Wait for 2-3 hrs before giving smooth finish to grout surface with a sponge & hand-glove finger with mild shampoo water. Wait for 24 hrs and finally clean the surface with water to remove the epoxy marks. Surface is now ready to use. Mixing Detail :   Particulars1 kg Pack5 kg Pack Part A - Hardener 70 gm 350 gm Part B - Resin 180 gm 900 gm Part C - Filler powder 750 gm 3.75 kg     Area of Application : Washrooms and Cleaning Rooms Swimming Pools Laboratories Schools Hospitals and Operation Theaters Lounges Packing Details : Available in 1 kg and 5 kg units Project pack in 20 kg, available on request Shelf Life : 24 months from the date of manufacturing. Coverage : Varies with width and depth of joint.

RITEPOXYTM EIG 2200 Epoxy Industrial Grout   RITEPOXYTM EIG 2200 Industrial Grout is an Epoxy based Grout (100% solid) designed specially for use in application at industrial and commercial areas where high strength, free flow, chemical & temperature resistance is required. RITEPOXYTM EIG 2200 is easy to mix joint filler available in four shades (Brilliant white, Terracotta, Natural grey, Jet black).   Features: High Strength and 100% solid epoxy grout High Chemical and temperature resistance Abrasion resistance Anti-bacterial and Anti-fungal Strong, durable and easy to clean Acid & Stain resistant Application Preparation: Clean application area & remove dirt, dust & excess adhesive from tile joints. Mix Part A & Part B in a bucket thoroughly and slowly add Part C (filler Powder) to make a homogenous mixture. Using rubber float fill-up the tile joints. Wait for 30-45 mins for joints to harden. Begin initial clean-up with water & gently use scrub pad in circular motion to remove excess material from the tile/ stone surface. Use plenty of clean water until excess grout is cleared from surface. To remove excess material from the tile surface use wet towel at 45 degree to the grout joints. Wait for 2- 3 hrs before giving smooth finish to grout surface with a sponge & hand-glove finger with mild shampoo water. Wait for 24 hrs and finally clean the surface with water to remove the epoxy marks Surface is now ready to use Area of Application: Industrial and Commercial areas Hospital OT areas Dairies Food and Beverage processing units Pharmaceuticals High traffic areas Coverage: Varies with width and depth of joint. Packaging: 5 kg pouch and 10 kg units Shelf Life: 24 months from the date of manufacturing.

CGU (Color Grout) Product Description: MYMIX - CGU (Cementitious Colour Grout) is a white cement-based, polymer-modified color grout. It is the right bonding material to fill joints tile to fix ceramic, vitrified wall and floor tiles. They are resistant to shrinkage and cracking and can be used to fill tile joints (walls and floors) with a minimum width of lmm to 5 mm for both interior and exterior applications. Available in 28 colors to match your joints tiles made with color -fast pigments and fine graded aggregates. Advantages: Wide Joint bridging (upto 5 mm) Non‐shrinkable and will not crack Excellent workability, smooth and easy to spread and easy clean‐up Exceptional colour – stability Flexible to with‐stand pressures created by expansion and contraction of tiles How to apply : Clean Application Area Pour 300 to 350 ml water in a bucket Add 1 kg product in the bucket Mix thoroughly preferably with mechanical stirrer or manually Wait 5 minutes Apply the grout on prepared surface with a float Check for joints to harden Use damp cloth to remove excess paste from tile surface Wait 24 hours Applied surface is ready for use. For better application results recommended to add 200ml Admixture grout 990 to 1 kg CGU grout Suitable Substrates: Porous and absorbent type joints tiles Non-vitreous clay joints tiles Marble & Glazed wall joints tiles Glass Mosaic Joints Tiles Packaging: 1 kg pouch and 10 kg bag Colour: Available in 28 colours Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area.

CTA (Cementitious Tile Adhesive) Product Description: MYMIX - CTA is a Cementitious thin-set tile adhesive for floor applications. It has excellent bond to concrete & plastered surfaces. It has non-shrink, self-curing properties. Specially made for tile on tile, interior flooring of ceramic tiles, vitrified tiles & all natural stones. Application: Specially for floors Small and medium size tiles fixing For Internal use and External use Enquiry Advantages: Ready to use, needs no curing Suitable for tile on tile applications Excellent waterproofing characteristic Can accommodate thermal & physical movements Excellent adhesion, low shrinkage Suitable Substrates Plastered wall PCC / IPS Concrete (RCC) Surfaces ACC Block and all kinds of concrete Packing: 25 kg bag and Project packing of 40 kg bag is available on demand Colour: Available in Grey Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopenedcondition stored in dry area How to apply : Add 25 kg of "MYMIX - CTA (Cementitious Tile adhesive)" to approx. 6.5 to 7.5 liters of cool and clean tap water Stir properly for 5 minute by hand or an electric stirrer to get a smooth and homogeneous mixture After stirring wait for 10 minutes, stir once again Now Apply the adhesive on the subfloor with the recommended adhesive notch trowel Check properly to ensure that the back of the tile is in full contact with the adhesive Remove excess adhesive immediately from the joints

IG 2 (Cementitious Industrial Grout) Product Description: "MYMIX - IG 2" Premixed cementitious free-flow Non-Shrink high strength industrial grout, which is essential to withstand static and dynamic loads. It is a unique product designed to give positive expansion in the plastic and hardened states, producing a low porosity high durability material. It is carefully designed very fine blend of Portland Cements, quartz sand modified with silica fume and expansive agents. The product is formulated to produce controlled expansion in the plastic state with low water mixing requirement to minimize segregation delivering high early strength and long lasting durability. Suitable Substrates: Machinery bases, Structural columns, pumps and accessory bases, anchor bolts, floor grids, crane tracks Precast structural membrane and to joints, dowels, rail posts and sealing bolts, powder line stanchions. General purpose grouting of narrow concrete cracks or gaps between concrete and metal structures All horizontal ducts or concrete, in situ opened channels installation of pipe lines, cables, ducts and plastic conduits Advantages: Excellent fluidity for easy use Easy to remove parts of structure Quick strength achieving Possibility for quicker loading   Dimensionally stable, needs no special treatment at opened ends, capping or edges No Separation High coverage and Economical How to Apply: Remove oil and grease from application surfaces and clean entire area with oil free compressed air All metal components shall be de‐rusted and free of paints and oil Remove excess water from voids and holes prior to grouting Any standard grout pump can be used Add 160ml to 180ml per kg of MYMIX IG2 Cementitious Grout. Determine size of the pocket to be grouted If the pocket depth is more than 5cm, add 30% pre‐washed, dry, coarse aggregates of size 4 to 8mm by weight Do not pour from two sides The materials should be quickly poured in order to avoid loss of workability Strike off the exposed areas as you keep pouring the materials Use wet hessian cloth or ponding water If a damp hessian is used, curing for at least 7 days is necessary Do not use vibrators for compaction of the material Packing: 25 kg bag and Project packing of 40 kg bag is available on demand Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area

CGV (Cementitious Grouting Additive) Product Detail: MYMIX ‐ CGV(Cementitious Grouting Additive) is an expanding grout admixture It is supplied as powder admixture It is combination of plasticising agent & gas producing expansive medium utilised in structural and pre‐stressed concrete elements The plasticising agent allows the use of a reduced water/ cement ratio with consequent increased strengths and durability Sufficient restrained expansion is developed to ensure a high degree of interfacial contact 225 gm CGV per 50 kg cement bag Advantages: Gaseous expansion system compensates for plastic shrinkage and settlement in properly designed cementitious grout Reduced water/cement ratio in the grout mix ensured low permeability and long term durability in service Gives high grout fluidity with low water/cement ratio, thus making placement or injection of the grout easy No metallic iron contact to corrode and cause staining or deterioration due to rust expansion in the grout Composition allows high early strength development in grouts, without the use of chlorides Packaging: 24 X 225 gms and 1 kg pouch Shelf Life: Best before 12 months from the date of manufacturing in unopened condition stored in dry area

CWC (Cementitious Crystalline Water Proofing System) Product Description: MYMIX - CWC (Cementitious Crystalline Waterproofing System) is an integral capillary concrete waterproofing compound which waterproofs and protects concrete in depth. It consists of Portland cement, specially treated quartz sand and special chemicals. Advantages: Easy to apply Penetrates deeply and seals concrete capillary tracts and shrinkage cracks Applicable for either positive or negative side pressure Effective under high hydrostatic pressure Tear or puncture resistant Does not require protection Withstands aggressive saline or chemical attack Suitable Substrates Basement and Foundation Tunnels and Subways Sewage and water treatment plants Concrete pipes How to apply Clean Application Area from dust & grease Pour 9 to 10 litre water in a bucket Add 25 kg MYMIX - CWC to water Mix thoroughly preferably with mechanical stirrer or manually Wait for 5 minutes to get a homogenous mix   Dams and reservoirs Harbours and bridges Parking areas Thoroughly scratch the surface using metal wire brush Apply the compound on the damp surface with a wire / nylon brush for better penetration Wait for 3 hours then Apply the second coat to get uniform surface by brush on damp surface Wait for another 24 hours Keep treated area damp for 5 days

MYMIX ‐ CCF(Crack Filler)" is Single component cementitious base crack sealing compound; it is formulated non‐shrink cementitious material to be used for filling cracks in concrete & masonry surfaces Advantages: Non‐shrink It is ideal for 3‐5mm cracks Strong adhesion to common building materials Excellent crack filling ability Non sagging material Suitable Substrates: Fill cracks in masonry, concrete and plaster On internal and external surfaces Interior and exterior usage application How to Apply: Make V shape grooves Clean the grooves using wire brush and water to remove loose particles, dust and grease Pre‐wet the application area Using a hand trowel mix 340 to 360 ml of water with 1 kg of MYMIX CCF to get uniform constancy of the mixture. Apply the paste by using suitable putty blade in to the groove and press properly Do not wet cure Coverage: Approx. 25 RM / kg for a V groove crack of 6 x 6 mm Packing: 1 kg Pouch. Colour: Available in Grey & White. Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area.

BJM (Block Jointing Mortar) Product Description: MYMIX – BJM(Block Jointing Mortar)" is a thin bed, high strength, pre-mixed, quality assured mortar comprising of Portland cement, specially graded sand and admixture. It is specially formulated and easily applied, giving a higher bonding with significantly higher air entraining properties. "MYMIX - BJM(Block Jointing Mortar)" is a masonry mortar for use in laying bricks, block or stone. It replaces conventional jointing mortar of 12-18mm thickness with highly versatile 3mm thickness mortar. Advantages: Quick setting proprietary mortar essentially “ glues “ the block together and the next course is ready to lay within a very short time Extreme durability eliminates future maintains Non‐metallic doesn’t rust out, will not discolour wall Ready mixed mineral based products designed for new construction as well as renovation purpose Being premixed, it saves considerable time and labour It doesn’t cause damage to eco system Water resistant to limit efflorescence Being premixed, the raw materials are so chosen and processed that inhibits efflorescence                       Suitable Substrates: Concrete Blocks AAC Blocks Cement mortar blocks / bricks Concrete hollow blocks Fly ash bricks How to Apply: Add 25 kg of “MYMIX‐BJM (Block Jointing Mortar)” to approx. 6.5 ltrs Of clean tap water and stir properly for 5 minute by hand or an electric stirrer to get a smooth and homogeneous mixture After stirring wait for 5 minutes Apply a thin uniform layer of mortar on clean block with a mason’s trowel to make an even joint layer of 3 ‐ 4 mm thickness Remove excess material if any from the joints The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish. Packing: 25 kg bag and Project packing of 40 kg bag is available on demand Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area.