Dextrins Dealers in Ahmedabad

Features • Single component • Easy to apply • Self curing • Non-shrink • Excellent adhesion properties • Ready to use as only water needs to be added   Applications • Used for interior and exterior floor and wall applications • Used for fixing ceramic tiles, vitrified tiles, porcelain tiles,natural stones, granites and marbles

Dextrins are prepared by heat treatment in presence of chemicals to suitably modify characteristics and properties of starch. They find application in dyes, adhesives, foundries, fire crackers, oil drilling and many other industries.

We are reckoned among the preeminent Manufacturers and Suppliers of Tiles Adhesive. Our Tile Adhesives are known for their high performance. It is waterproof, crack free and meets the requirements of IS 15477. Buyers are free to place bulk orders of the Tiles Adhesive with us and we ensure its timely execution within the allocated timeframe.   Benefits : Excellent adhesion, Self-curing and quick strength development. Convenient : Less labor and time intensive, Ready to use (only water to be added). Low water absorption makes it water resistant & minimizes shrinkage cracks. smooth and levelled fitting of tiles . Area of Application :For fixing all types of tiles on external/internal floors & ceramic tiles on wall.Instruction for use : Mix powder & water (Ratio 3:1 by volume) under continuous stirring for 3-5 minutes to a homogeneous, lump free, soft & smooth paste consistency. Mix as much quantity, which can be used within 45-60 minutes. Spread the mixed adhesive to a thickness of approx. 3-6 mm & comb with a notched trowel. Strictly fit tiles within 25 to 30 minutes on it. Check by finger, if don’t stick then remove it. Start placing tiles and tap the tiles properly to ensure complete coverage of the backside of tiles & to eliminate the possibility of any air voids. Precautions : The surface to be tiled should be clean- contamination free & tiles back should wet. must be scratched to expose at 70–80% of the clean surface for better bonding. Allow tiling to set for 24 hours prior to filling joints fillers. Avoid use for fixing heavy tiles or stones, marble, granite etc on vertical areas. Avoid eye or skin contact. If occur wash with plenty of water & consult doctor.

Description: dextrins are white, yellow, or brown powders that are partially or fully water-soluble, producing optically active solutions of low viscosity. They are produced by enacting the process of hydrolysis on starches. Hydrolysis involves splitting water up into its basic components and allowing those components to attach to other molecules. Our starch meets or exceeds api 13a specifications. Applications advantages: 1) yellow dextrin are used as water soluble glues in remoistable envelope adhesives, paper tubes, and as an adhesive in office paste,label gum and bottle gum. 2) it is used as thickening and binding agent in pharmaceuticals and paper coatings. 3) dextrin is used as pyrotechnic binder and fuel in fireworks and sparklers, allowing them to solidify as pellets. 4) it is used in foundary industry as green strength additives in sand casting. 5) yellow dextrin are used as a printing thickener for batik resist dyeing. 5) it is used in paint industry, dye industry and leather industry. 5) dextrin is used as texting finishing and coating agent to increase the weight and stiffiness of textile fabrics. Starch source: corn, tapioca or potato packaging: 2550 kg printed or plain hdpepp bagmultiply paper bagpaper & pp combined bag. Custom packaging options available on request. Shelf life: 1 year from the date of manufacturing

We are offering fasto industrial adhesives & sealants. we have a threade locker threade sealant retaining compound silicon sealant epoxy grauting instant adhesives constructions sealants constructions adhesives

STA (Stone Tile Adhesive) Product Descrption: "MYMIX - STA (Stone Tile Adhesive)" is a polymer modified heavy duty thin-set adhesive for fixing vitrified tiles, natural stones, Marble, granite for interior and exterior floor and wall applications as well as building facades. High flexibilityand superior bond strength makes "MYMIX - STA" the best choice for vertical stone cladding. Application: Specially for interior floors and walls Small and medium size tiles fixing For Internal use and External use Advantages: Single component adhesive mixed with water High bond Strength Suitable for exterior application of various tiles & stones High flexible adhesive   Non‐Skid adhesive Water – resistance properties Long open time with good workability Suitable Substrates: Concrete Cement Plaster Cement mortar beds Brick Masonry Ceramic tile & stone Cement Terrazzo Concrete masonry Gypsum wall board (Interior application) Suitable for vertical cladding of vitrified tile and stones` How to Apply: Planning your layout is essential. Choose your starting point to create a balanced visual appearance. Trowelling should be done horizontally. Spread the adhesive on to the wall, working on small areas at a time. Tiles must be fixed before the surface of the adhesive forms a skin. The tile is then adjusted to its final position with an up & down movement so that full coverage is obtained to the back of the tile. The size of trowel used should be approximately as mentioned. Add 25 kg of “MYMIX ‐ STA (Stone Tile Adhesive)” to approx. 6.5 liters. To 7.5 liters. Of cool and clean tap water and stir properly for 5 minute by hand or an electric stirrer to get a smooth and homogeneous mixture. After stirring wait for 10 minutes, stir once again and apply the adhesive on the subfloor with the recommended adhesive notch trowel Press the tiles within 15 to 20 minutes with a shuffling movement in to the adhesive. Check regularly to ensure that the back of the tile is in full contact with the adhesive. Remove excess adhesive immediately from the joints The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish. The surface should be flat with a tolerance of 4mm over a distance of 2 meters. It is essential to waterproof wet areas prior to tiling New concrete is recommended to be 1 month old for every 25mm thickness and completely dried before tiling. Under normal circumstances, i.e. a temperature of 20°C and a relative humidity of 65%, the joints may be filled after minimum 24 hours. Packing: 25 kg bag and Project Packing of 40 kg bag is available on demand Colour: Available in Grey & White Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturingin unopened condition stored in dry area

Maltodextrin is one of the most preferred carbohydrate by the food and pharmaceuticals industry. It has varied applications and is used for texturing, gelling, emulsifying and non-crystallization properties. It is used as excipient in pharmaceuticals and cosmetic applications. Maltodextrin is a source of energy and is easily digestible as it is quickly absorbed in the small intestine. It is easily soluble which ensures lump-free end product. It also helps in hydration. Owing to these properties, maltodextrin is extensively used in making of nutritional drinks. Maltodextrin has low reducing sugars present, and hence it produces very little Maillard reaction browning. Ice crystal formation is inhibited and it prevents grainy textures over time in frozen products. Its bland flavor makes it adaptable to most food processing requirements. Maltodextrin has a calorific value of 4 cal/g. Due to this property it is highly used as fat substitute in diet products. Maltodextrin has a neutral taste, natural mild sweetness and is available in powdered form.

These are modern 100 % solids, Solvent free adhesives used by modern high speed packaging lines in Hot Molten conditions with an ability to solidify fast and remain non tacky at room temperature.

ENIFIX BA-60 is a cold applied, low cost, high solids, quick setting, water base Bituminous Adhesive, designed to adhere Application Consistency thermal insulation like polystyrene foam, expanded polystyrene bead board, polyurethane foam, low density fibrous glass and cork to metal, masonry, wood and to itself. It is also used to adhere all types of 8.4 pounds (1.0 kg/l) vapor barrier facings, papers and polyethylene film to insulation and building surfaces.   Recommended Use To adhere Application Consistency thermal insulation like polystyrene foam, expanded polystyrene bead board, polyurethane foam, low density fibrous glass and cork to metal, masonry, wood and to itself.   Features: 1 Good adhesion 2 Non-toxic & non- flammable 3 Alkali resistance 4 Very good Cohesion 5 Antifungal & antibacterial 6 Suitable to challenging weather condition

We are offering the best quality Stationery Adhesives, also known as Paper Adhesives or Scrapbook Adhesives. Stationery Adhesive POLYFIX’s is a white sticky emulsion that is safe & non-toxic, and ensures clear film & quick drying. The Stationery Adhesives are used for pasting paper, cardboard, pictures, wood, thermocol, fabric, etc. The Stationery Adhesives are suitable to be used in offices, schools, homes and for making art & craft articles. The Paper Adhesives can be availed from us in small and bulk quantities at the most competitive prices.

Henkel operates worldwide with leading brands and technologies in three business areas: Laundry & Home Care, Cosmetics/Toiletries and Adhesive Technologies. Since 1953, LOCTITE® have been the leading threadlocker technology. For the Adhesive Technologies Loctite have more than 5000 products in below mentions solutions. For more information click on below links.   Bonding Coating Gasketing Lubricating Machining Compounds Retaining Sealing Surface Preparation Thread Sealing Thread Locking   Loctite® is the global technology leader and the #1 brand of thread locking, thread sealing, Gasketing and retaining products: the widest range of assembly solutions on the market. we are dealing in Loctite India and International products for more than 25 years. Henkel Loctite products include thread locking, retaining, gasketing, thread sealing, bonding, 'O' ring kit, anti Seize, epoxies, activators, cleaners and many more. we have mention some of the Henkel Loctite® products over here. Contact us for product details not mention here.

Chemical woodworking high temperature hot melt adhesive glue pellets hot melt glue granules for pvc edge banding For Manual as well as automatic machines. Stored in a cool and dry place (temperature is 5-30℃)  

we are highly counted amid the renowned Manufacturers, Suppliers and Exporters of CPVC Solvent Cement. CPVC Solvent Cement manufactured by us is highly reliable when it comes to join the crucial breakdowns of Pipes and Fittings. Buyers from all over the world can purchase PVC Solvent Cement at the most economical price, in various quantities from us.