Post Free Ad Sign Up

Dextrins Dealers in Morbi

(44 products available)
Gidc Morbi 2 Wankaner
  • Premium
    easifix easi-bond plus adhesive +1

    easifix easi-bond plus adhesive

    250 / Litre
    • MOQ1000 Litre
    • Brand NameEasifix
    • MaterialPolyimide
    • Design PrintingOffer Printing
    • ApplicationConstruction Use
    • FeatureAntistatic, Holographic, Printed, Waterproof
    • Adhesive SideDouble Sided
    • Country of OriginIndia
    • Packaging Size5 Litre
    • EASIFIX EASIBOND-PLUS is a waterproofing compound Which includes plasticizing agents, polymers and additives . It is used as a additive in cement concrete, mortar and plasters.   EASIFIX EASIBOND-PLUS improves the cohesive strength And prevents segregation. It also reduces the permeability Of water into concrete.
    ...more
    www

    Easifix Adhesives

    Wankaner, Morbi
    2 yrs
  • Premium
    Tiles Adhesive

    Tiles Adhesive

    8 - 16 / Kilogram
    • MOQ10000 Square Feet
    • Design PrintingOffer Printing, Plain
    • ApplicationTiles Use
    • FeatureAntistatic, Holographic, Printed, Waterproof
    • Width0-10cm, 10-20cm, 20-30cm, 30-40cm, 40-50cm
    • Country of OriginIndia
    ...more
    www

    Jenil Corporation

    Lalpar, Morbi
    GST 7 yrs 4.0 (5)
  • Premium
    VW-777 WHITE TILE ADHESIVE

    VW-777 WHITE TILE ADHESIVE

    500 - 600 / Bag
    • MOQ200 Bag
    • Country of OriginIndia
    • Number Of FlowerTile Adhesives
    • Packaging TypeBOPP BAG
    • ApplicationTiles Use
    • Design PrintingOffer Printing
    • Raw MaterialCEMENT SILICA
    • MaterialTILE ADHESIVE
    • Brand NameVIBERO
    • VW-777 White A premium water & frast resistant, highly polymer modified cementitious wall and floor tile adhesive specially formulated for All slab vitrified tiles, fxing mosaic tiles ceramic, glass mosaic etc. it is also suitable for fixing ceramic, vitrified wall & floor tiles, metal or glass tiles, marble, granite, quartz stone, terrazzo and other natural stone in interior and exterior locations which includes use in swimming pools. This is ideal for fixing tile on tile.
    ...more
    www

    Shambhu Packaging

    Morbi
    GST 2 yrs 5.0 (1)
  • Premium
    Ceramic Wall Tile Adhesive +5

    Ceramic Wall Tile Adhesive

    200 - 1,000 / Square Feet
    • MOQ1 Container
    • MaterialCeramic
    • FormSquare
    • ApplicationKitchen,Interior,Exterior,Elevation,Bathroom
    • FeatureAntistatic, Heat Resistant, Holographic, Printed, Waterproof
    • Number Of FlowerPorcelain Tile
    • Country of OriginIndia
    • Floor Specification ( Unit:mm2)600X1200MM / 60X120CM / 24"X48"
    • TextureSolid
    • Design StyleModern
    • Water Absorption0.05%
    • FunctionAcid-Resistant, Antibacterial, Heat Insulation, Wear-Resistant
    • Ceramic porcelain floor , Wall TilesSize : 600X1200MM / 60X120CM / 24"X48"Quality : First GradeMOQ : 1x20FCLQuantity per Box :1.44 sqm per boxDesign : Available More than 200 DesignPacking : Packed with corrugated Boxes with High Quality Wooden Pallet packingMade In India
    ...more
    www

    Lexus International

    Lalpar, Morbi
    GST 13 yrs 4.5 (30)
  • ENGOBE WLL TILES WHITE POWDER

    ENGOBE WLL TILES WHITE POWDER

    19 /

    • MOQ10 Metric Ton
    • Brand Nameimpele impex
    • Applicationceramic wall tiles
    • TypeENGOBE WHITE POWDER
    • Model Numberii4
    • engobe white powder12000
    • While climbing on the success ladder, it has become increasingly important for us to deliver high grade engobe white powder. Tested as per the industry guidelines and clients' requirements, this ceramic raw material is available in varied air-tight packaging materials. Widely used in ceramics and apart from this, it is also used as a light diffusing material in bulb & as a paint to modify gloss level. This engobe white powder is acclaimed across the nation for accurate composition, purity, solubility, eco-friendliness, high effectiveness and longer shelf life.
    ...more

    Impele Impex Pvt.Ltd.

    Lakhdhirpur, Morvi
    10 yrs
  • Tile Adhesives

    Tile Adhesives

    Get Price Quote
    • TypeTile Adhesive
    • MaterialCement-based
    • ColorGray
    • Packaging TypePlastic packet
    • ApplicationIndoor And Outdoor Tile Installations
    • Water ResistanceYes
    • We offer a cement-based gray Tile Adhesive in a convenient plastic packet packaging, suitable for indoor and outdoor tile installations. Our adhesive provides excellent water resistance, ensuring long-lasting durability for your tiling projects. Trust our high-quality product to securely bond tiles in place, making your installation process smooth and efficient. Ideal for both professional contractors and DIY enthusiasts, our Tile Adhesive is a reliable choice for achieving a flawless finish every time.
    ...more

    shiv marketing

    Morbi
    3 yrs
  • ROCATEX WHITE TILES ADHESIVE

    ROCATEX WHITE TILES ADHESIVE

    15,000 - 20,000 / Ton
    • MOQ100 Bag
    • Number Of FlowerAdhesives
    • MaterialAdhesive, Tile Adhesive
    • ApplicationBathrooms, Ceramic, Tiles
    • Purity90%
    • FeatureWaterproof
    • FormPowder
    • AdhesivePressure Sensitive
    • Adhesive SideDouble Sided, Single Sided
    • Country of OriginIndia
    • ROCATEX PRIME is polymer modified white cement base tile adhesive specially designed for heavy duty applications for fixing vitrified tiles & large size tile on wall surfaces. This highly flexible adhesive also has an excellent waterproofing ability. When properly applied, it takes care of hollowness problem. Highly recommended for light base internal wall & floor tile .
    ...more

    Rocatex constrochem

    Morbi
    5 yrs
  • Antique Set Plus Copper Adhesive

    Antique Set Plus Copper Adhesive

    Get Price Quote
    Antique Set Plus Copper Adhesive (Grey) PRODUCT DETAILS Grey, high polymer modified tile adhesive, suitable for fixing tiles & natural stones in interior situations. Applications and more difficult and demanding situations consult Antique regarding use of a higher performance adhesive. SHELF LIFE AND STORAGE Shelf life is 12 months from the date of manufacturing in unopened condition.Store in a cool and dry place. COVERAGE This will depend on the nature and flatness of the surface and the method of application, but at 3 mm thickness its is approx. 55-60 sq. ft. per 20kg bag when using a thin bed trowel.For good coverage, it is vitally important that all surfaces should be clean,smooth,plumb,level and free from defects and undulations. PACKAGING : 20kg
    ...more

    Antique Designer Tiles

    Rafaleshwar, Morbi
    15 yrs
  • Premium
    20 Kg Strong Bond Terracotta Adhesive

    20 Kg Strong Bond Terracotta Adhesive

    Get Price Quote
    • MOQ100 Kilogram
    • Brand NameStrong Bond
    • TypeTerracotta Adhesive
    • MaterialTerracotta
    • ApplicationTerracotta Bonding
    • FormPowder
    • Weight20 Kg
    • Weather ResistanceResistance To Weather Conditions
    • Drying TimeFast
    • Pack TypeBag
    • We offer Strong Bond 20 Kg Terracotta Adhesive, a high-quality powder adhesive designed for bonding terracotta materials. Ideal for exporters, suppliers, and traders, this weather-resistant adhesive ensures a strong bond in various weather conditions. With fast drying time and convenient bag packaging, our Terracotta Adhesive is perfect for terracotta bonding projects. Trust Strong Bond for reliable and efficient solutions for your terracotta applications.
    ...more

    Ortus Globals

    Wankaner, Morbi
    GST
  • 20 Kg Majestic Platinum Adhesive

    20 Kg Majestic Platinum Adhesive

    535 / Bag
    • Country of OriginMade in India
    • Packaging Size20 kg
    • Packaging TypeBag
    • Grade StandardChemical
    • StrengthHigh
    • Chemical ResistanceWater
    • We provide a high-strength 20 Kg Majestic Platinum Adhesive, proudly made in India. This chemical-grade adhesive comes in a convenient bag packaging, ensuring easy handling and storage. With excellent water resistance, this adhesive is ideal for various applications. Trust in the quality and reliability of our Made in India adhesive for your projects.
    ...more

    Majestic Ceramic

    Morbi
    9 yrs
  • Tile Adhesives

    Tile Adhesives

    149 - 999 / Bag
    • Brand NameDeflex
    • *Required Business Partner* As Dealer, Distributor Or Super Stockist for Leading Brand Dharma Bond In all over Country Worldwide.   Dharma Bond TILE ADHESIVE Powerful Bonding With Advanced Polymer Technology   Dharma Bond   High Quality Grouting Famous For Its Durability, Non-porous, Stain-Resistance And Waterproof Nature.      *Dharma Bond*    Fiber Base    Tiles Adhesive Block Joining Mortar Redy Mix Plaster    
    ...more

    chamunda welding works

    Moon Nagar, Morbi
    GST 11 yrs
  • Tile Adhesive

    Tile Adhesive

    Get Price Quote
    • Brand NameAntique Platinum Adhesive (white)
    • We are counted among the trustworthy Manufacturers and Suppliers of Antique Platinum Adhesive (white) from morbi, Gujarat. These adhesives are manufactured by using qualitative raw compounds under the strict guidance of industry professionals. Our White Platinum Adhesives find their applications for both interior and exterior installations, which includes under water applications for fixing tiles, marble etc. Platinum Adhesive is known for their workability and high bonding strength.   Description : The ultimate one-step, polymer modified, thin-set mortar for interior and exterior installation of ceramic tile, stone, quarry tile, pavers and brick. Antique Platinum Adhesive , designed to just mix with water, has a long open time with unsurpassed adhesion and workability.Uses : Excellent for exterior and underwater applications, Like for fixing swimming pool tiles, marble, granite and all kind of ceramic tiles.Advantages : Exceeds Shear Bond Strength Requirements. Ultimate adhesion for porcelain and glass tiles. Superior for exterior and submerged applications. High shear bond strength. Smooth creamy formula. See limitations. Suitable Substrates : Concrete / Masonry . Concrete block . Cement mortar beds . Non-water soluble cut-back adhesive* Existing ceramic tile and stone Interior use only : Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.Approximate Coverage : 55–60sft per 20kg bag with 1/4" x 1/4" (6 mm x 6 mm) notched trowel. Coverage will vary depending on trowel notch size, type and size of tile and substrate. Shelf Life : Factory sealed containers of this product are guaranteed to be of first quality for one (1) yearif stored off the ground in a dry area. High humidity will reduce the shelf life of bagged product. Packaging : 1kg, 20kg bagColor : WhiteLimitations : Not for use directly over particle board, luan, Masonite® or hardwood floors. Adhesives/mastics, mortars and grouts for ceramic tile, pavers, brick and stone are not replacements for waterproofing membranes. When a waterproofing membrane is required, use a Antique Platinum Adhesive Waterproofing Membrane. Note : Surfaces must be structurally sound, stable and rigid enough to support ceramic/stone tile, thin brick and similar finishes. Substrate deflection under all live, dead and impact loads, including concentrated loads, must not exceed L/360 for thin bed ceramic tile/brick installations or L/480 for thin bed stone installations where L=span length.Cautions : Consult MSDS for more safety information. Some marbles and other stone have low flexural strength and may not be suitable for installation over wood floors. During cold weather, protect finished work from traffic until fully cured. Contains portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water. Wait 14 days after the final grouting period before filing water features with water at 70°F (21°C) Do Not take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas. Keep out of reach of children.  Specifications subject to change without notification. Results shown are typical but reflect test procedures used. Actual field performance will depend on installation methods and site conditions.Installation : Surface Preparation : All surfaces should be between 40°F (14°C) and 90°F (32°C) and structurally sound, clean and free of all dirt, oil, grease, paint, concrete sealers or curing compounds. Rough or uneven concrete surfaces should be made smooth with Antique Platinum Adhesive Latex Portland Cement Underlayment to provide a wood float (or better) finish. Dry, dusty concrete slabs or masonry should be dampened and excess water swept off. Installation may be made on a damp surface. Concrete slabs must be plumb and true to within 1/4" (6 mm) in 10 ft (3 m).Note : Antique Platinum Adhesive does not require a minimum cure time for concrete slabs. Expansion joints shall be provided through the tile work from all construction or expansion joints in the substrate. Follow ANSI specification A108.01-3.7 “Requirements for Movement Joints: Preparations by Other Trades” or TCNA detail EJ-171 “Movement Joints—Vertical & Horizontal”. Do not cover expansion joints with mortar. Installer must verify that deflection under all live, dead and impact L/360 for ceramic tile and brick or L/480 for stone installations where L=span length. Mixing : Place clean, potable water into a clean pail. Add Antique Platinum Adhesive. Use approximately 5-5.5 litres of water for 20kg of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5–10 minutes. Remix with out adding any more water or powder. During use, stir occasionally to keep mix fluffy. Do Not temper with water.Application : Apply Antique Platinum Adhesive to the substrate with the flat side of the trowel, pressing firmly to work into surface. Comb on additional adhesive with the notched side. Note : Use proper sized notched trowel to ensure full bedding of the tile. Spread as much mortar as can becovered with tile in 15–20 minutes. Back butter large tiles >8" x 8" (>200 mm x 200 mm) to provide full bedding and firm support. Place tiles into wet, sticky mortar and beat in using a beating block and rubber mallet to embed tile and adjust level. Check mortar for complete coverage by periodically removing a tile and inspecting bedding mortar transfer onto back of tile. If mortar is skinned over (not sticky), remove and replace with fresh mortar.Grouting : Grout the installation after a minimum of 24 hours curing time at 70oF (21oC). Grout with Antique TG Silver Sanded Grout or Antique TG Golden Unsanded Grout mixed & Antique Platinum Grout Admix Plus. For maximum stain resistance use Antique Platinum Adhesive Stain free Grout for Floor N’ Wall.Maintenance : Antique Platinum Adhesive grouts require routine cleaning with a neutral pH soap and water. All other Antique Platinum Adhesive materials require no maintenance but installation performance and durability may depend on properly maintaining products supplied by other manufacturers.Warranty : Antique Designer Tiles warrants that Antique Platinum Adhesive is free from manufacturing defects and will not break down, deteriorate or disintegrate under normal usage for a period of one (1) year from date of purchase subject to the terms and conditions stated in Antique Platinum Adhesive Product Warranty.
    ...more

    Antique Designer Tiles

    GIDC, Morvi
    11 yrs
  • TILES ADHESIVES +1

    TILES ADHESIVES

    245 / Bag
    • MOQ200 Bag(s)
    • Number Of FlowerTile Adhesives
    • ApplicationTiles Use
    • Raw Materialmade with 53 major cement company
    • SmartCare Tile Adhesive for Normal Application is a single component Cement based polymer-modified adhesive for fixing a variety of tiles and natural stones in fresh constructions or complete re-tiling. you can also used it for floor vitrified tiles, wall tiles,granite tiles,marble,glass tiles,exterior floor tiles etc 1 bag containg 25 kg material for more detaile you can see images
    ...more

    Disha Traders

    Lakhdhirpur, Morvi
    GST 7 yrs 4.0 (2)
  • NUFIX PRO White Tile Adhesive

    NUFIX PRO White Tile Adhesive

    Get Price Quote
    • Ash content3%
    • Compressive strength1500 kg/cm2
    • Flexural strength350 kg/cm2
    • Tensile shear strength170 kg/cm2
    • Max. Operating Temp C.180 to 200 deg. C
    • Working time 30 deg. C.30 to 40 minutes
    ...more

    ART INTERIO GLOBAL INDIA PVT. LTD.

    Ravapar, Morbi
    GST 4 yrs
  • Tile Adhesive

    Tile Adhesive

    779 / Kilogram
    • Brand NameTile Pro
    • Packaging TypePP Bag
    • Country of OriginMade in India
    • Model NumberNSA Gold
    • Packaging Size20 Kg
    • FormPowder
    • StrengthHigh
    • Is It Eco FriendlyYes
    ...more

    Tile Pro Solution

    Morbi
    5 yrs
  • Premium
    Premium Grade Tile Adhesive

    Premium Grade Tile Adhesive

    Get Price Quote
    • MOQ25 Ton
    • Packing Size5/10/25 Kg PP Bags
    • Bonding StrengthStrong
    • Suitable ForInterior & Exterior
    • Ideal ForCeramic & Vitrified Tiles
    • FormulationWater-Resistant
    • Mixing & ApplicationEasy
    • Open Time For FixingLonger
    • Shelf Life12 Months
    • We offer a premium grade tile adhesive in 5/10/25 Kg PP bags, known for its strong bonding strength suitable for both interior and exterior applications. Ideal for ceramic and vitrified tiles, our water-resistant formulation ensures durability. Mixing and application are easy, with a longer open time for fixing. With a shelf life of 12 months, our product is perfect for exporters, suppliers, and traders looking for high-quality tile adhesive solutions.
    ...more
    www

    Sarthi International

    Morbi 2
    GST 4 yrs
  • Glass Mosaic Adhesive

    Glass Mosaic Adhesive

    Get Price Quote
    Glass Mosaic Adhesive, Plain Colour Wall Tiles - Black, Granite Ston

    LD Ceramics

    Wankaner, Morbi
    16 yrs
  • Adhesives

    Adhesives

    Get Price Quote
    Adhesives, Epoxy Glue, Cement Grou

    La-fix chemical industries

    Morbi 2
    2 yrs
  • UV Cure Adhesive

    UV Cure Adhesive

    Get Price Quote
    UV Cure Adhesive, Packaging Adhesives, Film Adhesive

    ratnadeep enterprise

    Trajpar, Morvi
    11 yrs
  • UPVC Adhesive

    UPVC Adhesive

    Get Price Quote
    UPVC Adhesive, Colourless Wood Preservative, Synthetic Rubber Preservativ

    Admor Polymers

    Morbi, Morvi
    11 yrs
  • Wall Tile Adhesive

    Wall Tile Adhesive

    Get Price Quote
    Wall Tile Adhesive, Religious Wall Tiles, Table Top Wash Basi

    Radhe Decoretive

    Morbi
    3 yrs
  • Tiles Adhesive

    Tiles Adhesive

    Get Price Quote
    Tiles Adhesiv

    Soso chemicals

    Gidc, Morbi
    5 yrs
  • Tile Adhesives

    Tile Adhesives

    Get Price Quote
    Tile Adhesives, Subway Tiles, Mosaic Tiles, Bathroom Accessorie

    PDS Ceramic

    Morbi
    1 yr
  • Tile Adhesive

    Tile Adhesive

    Get Price Quote
    Tile Adhesiv

    Smarkon

    Morbi
    3 yrs
  • Synthetic Wood Adhesive

    Synthetic Wood Adhesive

    Get Price Quote
    Synthetic Wood Adhesiv

    Banner Enterprise

    GIDC, Morvi
    12 yrs 5.0 (1)
  • Tile Adhesive

    Tile Adhesive

    Get Price Quote
    Tile Adhesive, Epoxy Grout, PU Adhesive, Wall Putt

    Furbo Chemicals

    Morbi
    1 yr
  • Ceramic Tile Adhesives

    Ceramic Tile Adhesives

    Get Price Quote
    Ceramic Tile Adhesives, Sanitaryware

    NEW CERA MINECHEM

    Morbi 2
    7 yrs
  • Corrugated Adhesive

    Corrugated Adhesive

    Get Price Quote
    Corrugated Adhesive, Pasting Gum Powder, Corrugation Powder

    Shubh Manufaturer

    Mahendranagar, Morbi
    13 yrs
  • Tile Adhesives

    Tile Adhesives

    Get Price Quote
    Tile Adhesives, TILES ADHESIVES, Powdered Tile Grout, Epoxy Grou

    INFINITY INDIA CHEMICALS

    Halvad, Morbi
    7 yrs
  • Ceramic Tile Adhesives

    Ceramic Tile Adhesives

    Get Price Quote
    Ceramic Tile Adhesives, Epoxy Grout, Woven Bag

    Evara International LLP

    Ravapar, Morbi
    1 yr
More results
Filter by Locality

GENERAL LINK

Top Cities (India)

Morbi Localities

top