Check Valves Dealers in Khokhra, Ahmedabad

We have pioneered in manufacturing and supplying PP Non Return Valves. The PP Non Return Valves that we provide are ideal to be used in inellesfries and irrigation purpose. These PP Non Return Valves are specially designed using premium polypropylene. They also find their application in processes where the delivery pressure is high (i.e. more than 20 meters). The PP Non Return Valves should be placed near the pump to protect the pump from excessive back pressure to prevent the water running back through the pump incase sudden failure of prime movers. Attributes : Can withstand high pressureExcellent performanceAvailable in various sizesHighly durable Specifications ProductColorSizeP.P Reflux ValveRed50mm, 65mm, 80mm, 100mmP.P NRV Flanged (Ball Type/ Plunjar Type)Black50mm, 65mm, 80mm, 100mm

Having association with the leading names enable us to deliver high quality products to our worthy clientele. In addition to this, we procure the basic material from the trusted places only. As a known name, we ensure safe and timely delivery of the orders at any desired Ahmedabad(India).

Double Flap Valves, also known as Double Flap Valves or Double Flap Gates, are a type of airlock valve commonly used in industrial applications as a component in bulk material handling applications. Double Dump Valves are primarily used to discharge chunky, pellets, granules or fibrous, bulk materials from hoppers, bins, and cyclones operating under positive or negative pressure. Double dump valves are used to discharge a flow of material while at the same time serving as an airlock transition point to preserve the pressure differential above and below the valve. This type of material handling valve is ideal for use with bulky or abrasive materials that would tend to jam or damage aRotary Feeder Double dump valves have two trap-door flap plates which open and close on an alternating cycle. The top gate opens to allow collected material to drop through onto the bottom gate. The top gate then re-closes to prevent air leakage above the valve. The bottom gate then opens to allow material to pass completely through the valve. The bottom gate then re-closes to prevent air leakage below the valve. This cycle is continuously repeated in order to maintain a steady discharge of material from the valve, while maintaining a positive seal on the system. Each flap plate has its own pneumatically operated cylinder and solenoid valve. The timing of the valve is controlled by an electronic signal sent to the solenoid valves. This method of operation is design to provide first class automation with sequential controller for accurate timing of the desire functioning of the valve.  

We are offering wafer check valve. Technical specifications : design : wafer typeseat material (lining) : nitrile, epdm, silicon, viton.body material : cast iron, carbon steel (astm a 216 gr. Wcb, forged carbon steel (astm a 105), cf8 (ss 304), cf8m (ss 316), cf3m (ss 316l), ss 202, alloy steel & others.end connection : fitted between two flangespressure rating class : asa 150, pn 10.size range : 25mm to 1400mm

We are offering Check Valves. Operation : Automatic Size : From ½” to 48” ANSI Class : #150 to #2500 Material : All Grades of Carbon Steels, Stainless Steels and Alloy Steels Ends : Flanged and Butt-weld Ends.

The RICON Dual Tunnel type diverters have been specially designed to route powders and pellets with minimum degradation in pneumatic conveying systems. The RICON plug type diverter is applied in the chemical, pharmaceutical, plastic, food and other related industries.   The RICON plug type diverter consists of an Aluminum housing and end covers in which a plug with two pipes is installed. All product contact surfaces are made from SS 304. Three approved silicone seals guarantee the sealing between housing and plug. The body is pressure tight, so ensuring no leakage to atmosphere. The standard diverter can be used in systems with positive pressures up to 3 bar g (static seals). The sizes 50-150 are optionally available for pressures up to 6 bar g (inflatable seals). The RICON Dual Tunnel Diverter Valve is supplied with a complete electro pneumatic control system, including solenoids and inductive position sensors. The standard diverter can be used for product temperatures ranging from –25 °C up to +80 °C at ambient temperatures of –10 °C up to +40 °C. Versions for higher temperatures are available on request.

FFV Disc Check Valve make in Investment Casting SS 304,SS 316 With Spring Loaded,Soft Seated Teflon.   Features Disc Check Valve(Non Slam Check Valve)Open And Closed Quickly Against the Opposite Flow Acting On Disc & Provide The Full Flow In Line It Occupy very less space and provide full flow. Light weight and easy installation Spring will prevent the reverse flow in pipe lines Zero leakage with soft seated Testing Standard: API 598

We are offering center disc lug type butterfly valve. design feature the unique center line seat and disc design insures positive valve sealing while maintaining low seating torque. all center line butterfly valve discs are precision machined to a half ball profile, providing a precise disc to seat relationship. center line’s cartridge style seat incorporates an elastomeric bonded to a phenol stabilizing ring, eliminating elastomeric movement and reducing seat tearing or fatiguing due to bunching. center line’s basic three bushing design completely isolates the valve shaft from the body, resulting in increased control of the valve disc, lower valve seating torque, and longer valve life. the center line cartridge seat has a much smaller mass of elastomeric than traditional boot seat designs, limiting seat swell and the accompanying variations in seating torque.

SALIENT FEATURES They are rugged and sturdy in construction . Body and bonnet casting have heavy metal section in excess of minimum requirement Streamlined contours to ensure that the pressure drop is minimum Close -fitting male and female joint retain gasket in position and accurately centers the working parts . Special alloy of trim is highly heat resistant and non-corrodible . Flat face of valve &seat lapped on flat surface lapping machine ensures better pressure tightness. Lift type Valve decreases hammer blow on seat due to back pressure . Lift Check valve Disc is of heavy one piece construction to withstand severe shock of Check valve service Swing Check valve Disc is fastned securely to disc carrier by means of a lock nut and cotter pin , Disc is free to rotate to avoid localised wear. A variety of end flange facing can be provided . Valve flanges can be drilled to different standard INSPECTION: Third party inspection by Lioyds, Bureau Veritas, ABS, UHDE, Bax Council, EIL and IBR etc. are being regularly Carried out against customer requirement. NOTES FOR CHECKS VALVES : The standerd Body /bonnet is material is of cast steel to ASTM A 216 Gr. WCB Body / Bonnet in Grades LCB /C-5 /WC-6/WC-9/CF-8/CF-8M/CF-3/CF-3M etc.Available to suit requirment.Trim: 304/316/Stellite etc. Pressure Sealed Bonnet Available in higher classes on Request

SEALMECH Check Valves are Bolted cover design up to 600# and above pressure seal design. SEALMECH Swing check valves are suitable for vertical and horizontal both line. A SEALMECH wide range of Check Valves (Non-Return Valves) available for oil, gas, water, refining, power and chemical applications, where the prevention of flow reversal is mandatory.