VARDHAN RESOURCES INDIA INTERNATIONAL Vejalpur, Ahmedabad, Gujarat

 Zircon – This glassy mineral has found its place in many an industrial application worldwide. Starting from ceramics and refractory tiles to a range of high-tech applications. Zircon compounds have a very low toxicity and are not perceived as a potential environmental hazard. They are even said to have some medicinal properties and are now increasingly preferred in the manufacture of food products and pharmaceuticals too. Zircon’s exceptional qualities of hardness and durability makes it a must use for the manufacture of ceramics and refractory tiles and also for a range of other high-tech applications such as armour plating on military aircraft, heat shield in space shuttles and potentially as solid oxide fuel cells in hydrogen powered vehicles in many industrial and chemical applications.

Country of Origin : India

Number Of Flower : Zircon Sand

Material : Zicron

Application : Industrial Coatings

Form : Dust, Crystal

Hardness : 6-9mohs

Packaging Size : Loose, 50kg

Grade : 30/60 80

Packaging Type : HDPE Bags

SiO2 Content (%) : 32.30- 32.70%

Al2O3 Content (%) : 0.35-0.60%

Condition : Good

Talc is a naturally occurring mineral, widely known for its softness and slippery feel. It is a hydrated magnesium silicate with the chemical formula Mg3si4O10 (OH0)2. Due to its unique physical and chemical properties. Talc is extensively used in various industrial and consumer applications. It is the softest mineral on the Mohs scale of hardness, ranking as a 1, which gives it a variety of uses, particularly in cosmetics, pharmaceuticals and industrial applications Talc powder (hydrous magnesium Silicate) grades available Ceramic Grade (coarse, medium and fine) Cosmetics Grade Paint Grade USP Grade Soapstone Grad Micronized Grade Finely Ground Grade

Packaging Type : Plastic Drums, Plastic Packets

Form : Powder

Application : Seed Coatings, Fruit Protection, Fertilizers

Packaging Size : 25-50Kg, 0-25Kg

Sodium Feldspar , also known as soda feldspar or albite, is a member the feldspar mineral group that contains a high percentage of sodium. Sodium feldspar powder is a feldspar product with a high concentration of sodium oxide (Na2O), typically sourced from sodium- rich minerals like albite and oligoclase. This powder is commonly used in the ceramics industry , particularly for  producing Porcelain and sanitary ware. Its aids in reducing the melting point of ceramics material improving their plasticity, and enhancing the quality of glazes. Additionally, soda feldspar powder is also employed in the production of glass, enamel, and other materials that requires a high alkali content. Sodium feldspar is more commonly used in the glass industry, while potassium feldspar is favored in ceramics and glazes due to its higher melting point.       The primary forms in which soda feldspar is supplied include. Ø  Lumps/ chunks Ø  Powder Ø  Granules

Shape : Natural

Stone Form : Sodium Feldspar

Application : Abrasives, Brake Linings, Ceramic, Electrodes, Glass

Size : 15x15Inch, 14x14Inch

Feature : Stylish Design, Striking Colours, Perfect Shape

Silica is the name give a group of minerals composed of silicon and oxygen, the two most abundant elements in the earth’s crust. Silica is found commonly in the crystalline state and rarely in an amorphous state. It is composed of one atom of silicon and two atoms of oxygen resulting in the chemical formula SiO2. Sand Consist of small grains or particles of mineral and rock fragments. We provides world’s best silica sand especially suitable for glass industry due its pure white color.APPLICATION : Paint Tile Adhesive Construction Chemicals RMC Polymer Concrete Sodium Silicate Glass Foundry Sand Blasting Spot Blasting Industrial Floor Coating Waterproofing Golf Course House Racing Tracks Artificial Grass Water Filtration Pool filter Oil & Petroleum Industries

Silica Content : 99%

Purity : 99%

Grade : Industrial Grade

Packaging Size : 50 Kg Bag, 25 Kg/ 50 Kg

Form : Granule

Number Of Flower : Silica Sand

Country of Origin : India

We are a leading exporter, supplier, retailer, distributor, importer, and trader of high-quality Silica Ramming Mass with 97% iron grade. Our product comes in convenient plastic packets, containing a fine powder state sourced from India. With a number of flower silica ramming mass, our top-grade material ensures optimal performance in various applications. Originating from India and available nationwide, our Silica Ramming Mass is ideal for industrial use, offering superior quality and reliability.

Material : Iron, Plastic, Quartz

Grade : 97%

Packaging Type : Plastic Packets

Number Of Flower : Silica Ramming Mass

State : Powder

Country of Origin : India

We offer you Silica Based Mortars. Silica Based Mortar is use in the making Block, its form of Powder and its colour are grey and black. Feature of this silica based  mortars are fast set, long shelf, super smooth finish. 

Country of Origin : India

Packaging Type : HDPE Bag

Usage/Application : Construction, Making Block

Form : Crystal

Packaging Size : 25-50kg

Grade : 30/60 80

Material : Silica

Hardness : 6-9mohs

Quartz is a fascinating mineral that has captivated humanity for centuries. Whether you’re interested in its geological significance, its beauty in jewelry. or its vital role in modern technology. Quartz is a crystalline mineral composed of silicon and oxygen atoms, with the chemical formula Sio2. Quartz is renowned for its hardness, durability, and the decorative stunning variety of colors it exhibits, which make it a favorite in both industrial application and minerals consistently meet our client’s requirements and exceed their expectations with us. We take pride providing the highest quality quartz. We also have quartz available in different forms. i.e quartz lumps, quartz powder, quartz granules/grits.  

Usage/Application : Jewellery Use

Material : Granite Stone,Marble

Size : Loss lumps

Surface Finishing : Bush Hammered, Flamed, Pickling, Rough-Rubbing

Stone Form : Granite, Slabs

We offer you Quartz Powder

Material : Quartz Stone

Applications : Plastic Industries, Paper

Grade : Industrial Grade

Packaging : Plastic Bags

Packaging Size : 50kg, 25kg

Our quartz lumps are available in different sizes and are known for their exceptional purity, durability and minimal impurities. We employ the latest technology in our production process, ensuring that quartz  lumps are thoroughly processed for consistent size, color, and quality. Advanced techniques like magnetic separation, precise sizing, and dust filtration are applied to deliver high- performance quartz lumps. Our quartz lump are ideal for use in various sectors, including glass manufacturing, ceramics and construction materials due to their high silica content and excellent physical properties.

Form : Solid

Shape : Lumps

Material : Quartz Stone

Quartz Granules mineral produces premium quartz grains that adhere to all quality specifications for top- tier products. Our  quartz granules in various sizes, aligned with industry demands and standards. Our state of the art technology ensures that we process the finest quality of white quartz or silica grains. In our production line, equipment undergoes processing through various control stages like magnetic separation, sizing, dust extraction, fine suction, advanced machinery, and precise size control. Further refinement is achieved through optical color sorting machines, ensuring the highest grade of quartz grits. This rigorous quality control enables us to deliver top quality products to our valued clients around the globe. Our grits/granules are known for their exceptional hardness, durability and abrasive properties, making them ideal for a wide range of industrial applications.

Form : Solid

Finishing : Polished

Material : Quartz Stone

Potassium Feldspar is one of the most abundant and important group of minerals in the earth’s crust. It is a type of Feldspar rich in potassium Oxide (K2O), primarily sourced from potassium rich minerals like orthoclase and microline. This powder is widely used in the ceramics industry, particularly for making glass and porcelain. It helps lower the melting temperature of ceramic materials. Boosts durability, and enhances the quality of the finished products. Additionally, potash feldspar powder is commonly used in the production of glazes, enamels, and other materials that demand high potassium levels.

Shape : Square, Round

Stone Form : Tiles, Slabs, Granite

Application : Glass, Ceramics

Size : 15x15Inch, 14x14Inch

Feature : Stylish Design, Striking Colours, Perfect Shape

Civil grade Bentonite is a superior colloidal Bentonite which is treated with special chemicals to achieve the desired marsh funnel viscosity. It is sodium Bentonite and ground to 200 mesh.   We have maintained our name in the list of leading manufacturer, supplier and exporter of Pilling Grade Bentonite Powder based in Gujarat, India. Our Piling Grade Bentonite Powder is used widely in many industries as a support, lubricant agent in walls and foundations, tunneling and horizontal drilling. Our Piling Grade Bentonite Powder covers large surface area, has good plasticity and lubricity, low filter loss, excellent gel strength, good impermeability and low compressibility.   Make Physical properties: Make excellent pond construction. Stabilize the excavation Penetrates deep into cleavages and cracks and clog the pores. Develops good suspension at lower dosage. Sub soil sealing and friction agent. Supporting suspension for cut of diaphragm wall construction and shield tunneling. Environmentally safe and does not affect the water, live stock or wild life when properly applies. Soil concrete. Swells 15-18 times to its size when it becomes wet.   Application: Mixing ratio is based on the fresh water purity. Water quality will affect Bentonite performance. Packing: 25 kg HDPE /Paper Bag, 50 Kg HDPE and 1000-1250 Kg Bag with liner.

Whiteness : 50-99%, 0-50%

Form : Powder

Grade : Drilling

Feature : Safe To Use

We offer premium Paint Grade Barite Powder sourced from India, also known as Barium Sulphate. Processed under optimal conditions, this powder boasts superior quality, making it ideal for various applications. With a high Number Of Flower content, it ensures excellent performance. As an Exporter, Supplier, Retailer, Distributor, and Trader, we guarantee top-notch products that meet your needs. Store this fine powder appropriately to maintain its quality. Choose our Barite Powder for reliable and efficient results in your projects.

Number Of Flower : Barite Powder

Storage Condition : Processed

Feature : Superior Quality

Form : Powder

Country of Origin : India

Olivine Sand, as a foundry and refractory aggregate, olivine is noted for its high fusion point, low uniform thermal expansion, and its remarkable ability to resist fracture from thermal shock. Olivine has been famous for years in producing excellent non-ferrous castings, monolithic and basic Refractories and a key raw material for Manganese Steel Castings. Today, more foundry men are realizing that olivine works equally well in Cast Iron and Stainless Steel. Olivine Sand, as a foundry and refractory aggregate, olivine is noted for its high fusion point, low uniform thermal expansion, and its remarkable ability to resist fracture from thermal shock. Olivine has been famous for years in producing excellent non-ferrous castings, monolithic and basic Refractories and a key raw material for Manganese Steel Castings. Today, more foundry men are realizing that olivine works equally well in Cast Iron and Stainless Steel.

Country of Origin : India

Packaging Type : HDPE Bags

Form : Crystal

Material : Olivine Sand

Application : Refractory Brick

We are offering Neutral Ramming Mass. The typical chemical composition of neutral ramming mass is as follows:  Al₂0₃ % – 86 % to 88 %, MgO – 7 % to 13 %, chromium oxide (Cr2O3) – 4 %, SiO2 – maximum 0.5 %, Fe₂O₃ % – maximum 0.2 %, and TiO2 – maximum 0.2 %. The size fraction of the neutral ramming mass ranges from 0 mm – 5 mm Application: Small, Medium Large Coreless Induction Furnace   Neutral ramming mass has good thermal shock resistance, corrosion resistance, wear resistance and other properties at high temperature.  

Packaging Type : Pp Bag

Packaging Size : 50 Kg

Number Of Flower : Ramming Mass

Shelf Life : 2year

Country of Origin : India

Moisture : 0-5%

State : Powder

We offer you Micro Silica. How it works Pozzolanic effect : it increase the performance of concrete & mortal formation. It acts physically to optimize particle packing of concrete or mortal mixture and chemically as a high reactive pozzolan. Micro Filler Effect :It is an extremely fine material, with an average diameter much finer than the cement. It gets well distributed in the cementations paste, thus blocking the bleed water channels. Quality   Micro silica is as super pozzolan – a finely powdered material which when added to cementitious matter increase durability and gives higher strength. It complies with ASTM C1240. Advantage ·        Higher compressive strength by 10-20% ·        Reduces the rate of carbonation ·        Lower permeability – Resistance to  penetration of water, chloride & other chemicals ·        Lower free lime formation – Delays Ettringite and Thaumasite formation ·        Controls bleeding in fresh concrete   ·        Lower Heat of Hydration, which prevents formation of cracks  

Country of Origin : India

Bulk Density : 0-500 Kg/m3,500-1000 Kg/m3

State : Solid

Packaging Size : 50 Kg, 25 Kg

Packaging Type : Barrel,Bottle,Box,Packet

Feature : Accurate Composition

Purity : 99%

Mica is a group of a naturally minerals that belong to the silicate family, specifically known for their excellent physical properties such as flexibility, elasticity and resistance to heat. Mica is widely used in a variety of industrial applications due to its unique characteristics, including its ability to split into thin, flexibility sheets. Features of Mica Ø  Electrical Insulation: high dielectric strength, low conductivity Ø  Thermal Resistance: withstands high temperature without degradation. Ø  Flexibility: thin, durable, and flexible sheets or flakes. Ø  Chemical Stability: resistance to most chemicals and corrosive substances. Ø  Optical Clarity: transparency and refractive properties used in optical applications. Ø  Low thermal Conductivity: effective heat barrier. Ø  Lightweight and Strong: high strength to weight ratio. Ø  Easily cleavable: perfect cleavage for thin, versatile sheets. Ø  Abundant and cost-: effective- widely available and economical. Ø  Non Toxic and safe: used safely in cosmetics and other consumer products.

Material : MICA

Finishing : Coated

Raw Material : Diamond. Metal Powder

Shape : Rectangle

Condition : New, Old

Application : High Temperature

APPLICATION-: \\n \\n Ceramic & Sanitary Ware Glaze \\n Compound \\n Frit \\n Body \\n Colors \\n Paint \\n Plastics \\n Refractory \\n Crockery \\n Porcelain \\n Tableware \\n Insulators \\n Rubber \\n Fiber Glass \\n \\n MOISTURE CONTENT-: \\n \\n Lumps    :  7-8% \\n Noodles :  1 % \\n Powder  :  0.5% \\n \\n  

Packaging Size : 50kg, 25 Kg/ 50 Kg

Material : China Clay, Clay

Form : Powder

Application : Decorative Items, Gift Items, Making Toys

Storage Condition : Dried, Wet

Feature : Effective, Purity

We are offering Kaolin Clay. Kaolin is white, soft, plastic clay mainly composed of fine grained plate like Particles. The application of Kaolin Clay has given below: 1. It is used in Paper as filler 2. It is used in Ceramics to provide strength in production of glazes and Refractories and electrical insulators and construction products enhancers. 3. It is used in Paints as a partial replacement of TiO2 pigment, and to improve the optical, mechanical and rheological properties and to enhance opacity, whiteness and scrub resistance. 4. It is used in Plastics to achieve smoother surfaces, dimensional stability and to reduce shrinkage and cracking during polymer compounding and shape forming. 5. It is used in PVC Cables to improve electrical properties. Chemically treated calcined Kaolin is one of the major activities used in engineering plastic. 6. It is used in Fiber, Glass & Rubber to assist better integration of the fibers into the materials. 7. It is used in Refractory to provide strength and to achieve greater whiteness during firing process because of this material is High Alumina & Low Iron Content. 8. It is used in Ultramarine Blue as main filler material in all ultramarine blue industries. Kaolin is also used in Manufacture of Inks, adhesives, caulks and sealants, cosmetics, pharmaceuticals, soaps and detergent, insecticides and pyrotechnics, feed and food additive and as a light diffusing material in white incandescent light bulbs to name just a few of the other applications.

Country of Origin : India

Number Of Flower : Kaolin Clay Powder

Packaging Type : Plastic Bags

Feature : Moisture Proof

Storage Condition : Dried

Material : Kaolin Clay

 We offer Insulating Castable.

Form : Powder

Application : Refractory Material

Grade : Insulating

Feature : Durable

Packaging Type : Plastic Sacks

Number Of Flower : Insulating Castables

Country of Origin : India

We are one of the prominent Exporters and Suppliers of Hydrated Lime Powder in Ahmadabad (India). The Hydrated Lime Powder is commonly used in the preparation of iron ore pulp and paper soda, caustic soda etc. Pure Hydrated Lime is also known as Calcium Hydrated or slaked lime. The wide demand of our Hydrated Lime Powder among the clients has encouraged us to deliver it at very reasonable pricesCharacteristics of Hydrated Lime Powder·    Kills bacteria·    Prevent environment mastitis·    Prevent lameness in cattle and sheep·    Reduce acidity of farm effluents Used InWater treatment operations such as:·    Softening·    Coagulation                      Applications of Hydrated Lime Powder                   Wire Drawing Unit   Pulp & Paper Soda preparations   Caustic Soda preparations   Bleaching Powder   Chemical Industry   Insecticides Industry   Magnesia Industry   Organic Industry   Water Purification   Sanitation Use   Textile and Sugar Industry   Coal & Ceramic Industry   Petroleum Industry   Leather Industry   Paint and Pigment Industry   Rubber Industry   Construction Purposes   Pharmaceutical Industry  

Number Of Flower : Hydrated Lime

Application : Industrial

Driven Type : Pneumatic, Mechanical, Hydraulic, Electric

Condition : Used, New

We are offering High Alumina Mortar. High temperature mortars are suitable for jointing, coating, and patching in all high temperature applications from 1450°C / 2640°F up to 1860°C / 3380°F.     Specification Content - Alumina content 95% Shape – Hemispherical Color – white Packing – wooden case packing Maximum Diameter - 660mm Maximum Height - 350mm Wall thickness - 15mm- 150mm 1. Custom Processing: Can be manufactured according to drawings; design drawing services available.  2. Isostatic Pressing: High-precision machining.   3. Physical Properties:  95% Alumina: Density of 3.65 g/cm³ 99% Alumina: Density of 3.9 g/cm³ Compressive Strength: 3000 MPa  Flexural Strength: 420 MPa  Thermal Conductivity: 26 W/m·K  Dielectric Strength: 10 KV/mm - 12 KV/mm  Volume Resistivity: 10¹² Ω·cm - 10¹⁵ Ω·cm  Maximum Operating Temperature: 1600°C 4. Safe Transportation: Packaged in specific wooden cases to ensure maximum safety of the goods.  5. Chemical Properties: Resistant to strong acids and bases.      

Material : Alumina

Form : Powder

Application : Industrial

Number Of Flower : High Alumina Fire Mortar

Country of Origin : India

Grade : 10/20, 20/40, 30/60 80

Hardness : 0-3mohs, 3-6mohs

We are offering High Alumina Cement. Products Description: Products Type - High Purity Alumina Cement Nature of Bond – Hydraulic  Physical Properties:  CCS Kg/cm2           1:3 vibrated mortar with standard graded sand after           Curing for 24 hrs -At 18 +- 2 ᴼC 400 min           After drying for further 24 hrs -At 110 ᴼC 600 Min  Setting time, Minutes :             Initial - 30 Min           Final - 500 Max  Thermal Properties            PEC Orton /ᴼC - 31/1683 Min  Packaging            The cement is packed in 50 kg HDPE Bags with polythene liner inside  Storage Life             More than 6 Months, when stored under cool, dry and fresh from free                      condition  Chemical Properties:  Al₂0₃ % 72.00% Min Fe₂O₃ % 00.30% Max   CaO % 25.00% Max

Grade : Industrial Grade

Country of Origin : India

Number Of Flower : High Alumina Cement

Packaging Type : PVC Bag,HDPE Bag

Feature : High Quality

Form : Powder

Material : Alumina Cement

We offer Garnet Sand \\\\n\\\\n\\\\n\\\\n\\\\nGarnet Sand comprise mineral that have been used as abrasives media in Shipyard, Fabrication Yards and Blasting & Cutting Industries. These blasting abrasives are used for sand blasting and are also applied in offshore rigs, general marine, structural steel, oil storage vessels and  rail-car containers. Garnet Sand comprise mineral that have been used as abrasives media in Shipyard, Fabrication Yards and Blasting & Cutting Industries.These blasting abrasives are used for sand blasting and are also applied in offshore rigs, general marine, structural steel, oil storage vessels and rail-car container.\\\\n\\\\n\\\\n\\\\n

Material : Sand

Form : Powder

Application : Water Filtration

Grade : 30/60 80

Packaging Type : HDPE Bags

Hardness : 6-9mohs

Abrasive Grain Sizes : 10-50 Mesh, 50-100 Mesh

Packaging Size : 50kg, 25kg

Number Of Flower : Garnet Sand

Country of Origin : India