Vertical Pumps Dealers in D Colony, Ahmedabad

• Motor Phase: Three Phase
• Material: Stainless steel
• Country of Origin: Made in India
• Model Name/Number: MXF Series
• Brand: Lubi
• Number of Stages: Multi-Stage
• Head Size: 36 m
• Speed: 2900 RPM
• Flow Range: 10.5 m3/h
• Power Rating: .37 to 1.50 kW

Our ultimate quality Vertical Open Well Set products are fabricated with qualitative materials & elements. These are based on the cutting edge technology of the industry. These can be easily installed at the bottom of well without necessitating suction pipes. These have dynamically balanced rotors as well as impellers to zero vibration &noiselesslyworking pumps are designed by our experts to ensure optimal functioning in a very safe and reliable way with preferable aspects. Thecompact design makes it ideal for lowestlevel ofwater.

• Head: Up to 40 Mtr
• Capacity: Up to 60 M3/hour
• Discharge Size: 40 mm & 50 mm
• Sealing: Glandless, Seal-less
• Pump MOC: PP/PVDF
• Type: Verticle

• Features: Vertical pumps require a minimum of NPSH since the lowest impeller is submerged in the liquid.

vertical pumping applications require the units be available in a variety of pumping configurations to meet user needs. Fairbanks Morse meets these demands by providing pump bowls from V-6,V-8,V-10 in diameter. Turbine bowls can be staged in series to produce the necessary discharge pressures.Materials of construction include cast iron, bronze, stainless steel and G.I Pipes or other machineable materials. Wear rings are available to provide a renewable surface.Open line shafts allow the product to lubricate the shaft bearings. Enclosed line shafts can provide external water flush, oil, or grease-bearing lubrication. Threaded or flanged column and line shaft assemblies are available in both short and deep-set applications.Drive shafts extending through the discharge head can be sealed using either packing or mechanical seals. A wide range of mechanical seal designs are available along with an assortment of packing box designs, including those for high-pressure applications. Fairbanks Morse also offers an array of discharge head designs, including cast iron or fabricated steel construction, above-or below-ground discharge, and flanged or plain-end discharge connections.Vertical turbine pumps can be driven by vertical monoblock motors, vertical solid-shaft motors, or through right-angle gears by an internal combustion engine, steam turbine, or horizontal motor. operate with gas kate and wind-mill.When vertical monoblock drivers are used, impeller-to-bowl clearances can be maintained with an adjusting nut located at the top of the driver. When vertical solid-shaft drivers are utilized, impeller clearance is regulated with an adjustable coupling.

:: Vertical Submerged Process Pump C.I. / M.S. / S.S. / Alloy 20 / Aluminium ::     In many applications in the chemical process filed, the use of vertical pumps for transfer or other services offers many advantages. perfect heavy duty vertical process pump handles clean, oily, sandy, corrosive liquids - the varied applica-tion industries include Chemical & Petrochemicals, Foods & Pharmaceuticals, Sugar & Paper mills, waste water treatment plants etc. We are specialists in corrosion resistant pumps, now offer a group of vertical pump process pumps especially built for heavy duty service, pumping corrosive liquids. A wide range of sizes for pit depth to 20 ft. in both the wet pit or submerged Steel / Stainless Steel with all parts of the unit in contact with the liquid made of this highly corrosive resistant material. Other materials to meet user's requirements are also available Outstanding Features Pump assembly including cover plate is a complete unit. A series of inter locking love joy couplings provides permanent allignment. Upper bearing easily replacable without disturbing pump or piping by removing only themotor and couplings. Upper bearing fully protected from pit fumes and atmospheric effects. All units furnished with love-joy couplings. Due to standardized parts design, unit may be adopted in field for changed pit depths or pump ratings by simply ordering new parts required. Not necessary to purchase a complete new unit. Sized for low P V loads for long bearing lift. Special proper support of intermediate shaft is provided. Unit length can be changed by changing only shaft and column components. Centrifugal, Quiet, Vibration-free. Submerged System With this type of uints, the single pump is placed directly into the sump or vessel which contains the liquid to be pumped. Suction opening is furnished with a slotted type full area strainer - if required. Duplex Unit Two Pumping units are mounted on a common pit cover.s The unit, innovatively developed by "Plasto", is specially designed to transfer exact quantum of liquid. It continuously indicates the level (quantity) of the liquid in the storage tank. With help of overflow level setting. only specific quantity of the liquid can be allowed to be transferred.

• Payment Methods: Cash, COD, DirectDebit
• Advantage: Low power consumption, High Capacity, Enable effective solutions
• Motor Power: 1 HP to 5 HP
• RPM: 2900 RPM & 1450 RPM

Inline Pump & Boster Pump Genral       "SHUKAN PUMPS" Range SPP And EY Series Inline Pump is a Horizonatal Single Stage Centrifugal Pump.Foot Mounted And Centerline Mounted and top Centerline Delivery Branch. The Complete Pump Rotating Element Can be withdrawn towards the motor end without disturbing the suction or delivery pipelines,due to'BACK PULL OUT DESIGN.' The motor remains fixed to base plate.the pump raotating elements can easily be dismantled into its components after reassembly no time consuming re-alignments is necessary. 'Pump Impiller' closed Or Semi-Open Radial Impiller Specially Designed For Low NPSH Requirments. Hydralically Balanced by Back vanes, or in the case of large impeller diameters by balancing holes and wear ring on both sides.Reliable fixing of impeller on the shaft by impeller nut and positive locking of impeller nut by means of threaded insert.   Inline Pump & Boster Pump Applications       Chemical Process Industries Organic & Inorganic Liquids Refineries Fertilizer Plants Dyes & Intermediates Bulk Drugs And Pharmaceutical Effluent Treatment Plants,Enviorement Plant Heating And Air Conditioning Plants Cooling Towers Sugar Plant Fire Fighting Water Tratment Plants Volatile Liquids Plants Pulp And Paper Mill , Textile Industries, Power , Steel Plants Cement Plants Fiber Plants,Starch Product Process Industries Dyeing Process Industries Thermic Fluid Heating System Plant Hot Water Plants etc... Oil Extraction And Waste Oil Refineries           Inline Pump & Boster Pump Operating Range         Speed - N - 960/1450/2900rpm at 50 Hz & 1150/1750/3500 rpm at 60Hz Capacity - Disharge- Up To 700 M3/Hr. HEAD - Up To 150 Mtr. Pump Sizes - DN- 25 mm to 300 mm. Temperature Up To 400° C         Inline Pump & Boster Pump Material of Construction           Graded Grey Cast Iron Carbon Steel ( WCB) Alloy Steel CF8M & CF8(SS-316,304)   SG IRON AND CAST STEEL CF3 CF3M(SS-316L) Alloy 20.etc.,           Inline Pump & Boster Pump Optional Accessories       M.S. Fabricated Base Frame/Flexible Coupling/Coupling Guard/Foundation Bolt.

• Type: Vertical Pumps
• Shape: Vertical
• Application: Constructional Use, Industrial
• Voltage: 110V, 220V, 380V
• Fuel: Electric
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw
• Pressure: 0-10bar, 10-20bar, 20-30bar, 30-40bar
• Warranty: 1 Year, 2 Years

Product features  Easy to install  Enhanced efficiency with all the advantages of mounting the prime mover and pump integrally on the same shaft.  The multistage vertical open well submersible monoblock can be placed at the bottom of the well. This arrangement does not require suction pipe.  Dynamically balanced rotors and impellers ensure vibration free performance and enhanced life.  Water can also be drawn from a borewell which is bored at the bottom of the openwell by inserting a suction pipe into the borewell and providing a cooling tank arrangement to keep the monoblock submerged in water.   Applications Irrigation Drinking water supply Industrial water supply Cooling water circulating systems   Technical Data

• Country of Origin: Made in India
• Brand Name: Farmtech

Lift Pumps, engine liner, Engine Piston, metal bushing

polypropylene vertical centrifugal process pump

metallic pumps, Single Spring Seal, Multi Spring Seals, textile seal

Chemical Process Pump Plastic, mono block pumps