Water Detector Dealers in Ahmedabad

Captivating our customers with our excellent performance, we have maintained our status as a top figure in the industry. As a Manufacturer, we take pride in presenting Temperature Sensor to our customers. It is manufactured by skilled experts to make sure there is no compromise with the quality. Its durability and effective performance make it an attractive alternative. The quality on offer is available to our customers for economical prices.

We offer ground penetrating radar, the viy series ground penetrating radar (gpr) is used for location and analysis of underground anomalies using electromagnetic pulse radiation. Operation principle of the gpr is based on surveying media illumination by electromagnetic impulses with following echoes analysis because of impulse reflection or scattering by various discontinuities. The gpr is suitable for searching of both metal and dielectric targets (stratiform structures, pipes, voids, building constructions etc.). For more detail visit us: http:www.cablelocator.in

Temperature Sensor offered comprises assembly type thermal resistance and as display instrument that meets the demands of measuring liquid and gaseous media. Some of the areas these sensors find use in include metallurgy, petroleum, chemical and other industry sectors. Its features include current limiting reactor support for any power size, resistor of any ohm value and wattage and others. These sensors are backed by latest technology support so as to provide for consistent and accurate performance results. We can also offer these temperature sensors in OEM specifications as demanded by the customers.   Specifications: Moulded case circuit breaker with magnetic trip setting 360A.550A,850A,1050A Fast acting fuse for protection of semiconductor device 800A,1000A,1250A,1500A Mov 575V, 660V Current limiting reactor (CLR) suitable for any size of power DI/DT Reactor High Frequency Transformer (HFT) Resistor of any ohm value and wattage Capacitor for snubber circuit and dc power supply Dc power supply assembly Potential transformer, control transformer, current transformer Temperature switch, temperature sensor, pressure switch, flow switch, pressure gauge,temperature gauge

We provide level sensors for Liquid and bulk solid measurement - continuous and up-to-date just like liquid levels. For stocking, tank content, storage capacities or automated disposal. We offer modern technology for small and large measuring tasks.

LPG Level Sensor is an electronic devices designed to detect the quantity of fuel (LPG or CNG GAS) available in the tank and send signal to switch which shows LED indication. LPG Level Sensor for right multivalve with mechanical reading by means of a gauge mounted directly on the multivalve, which shows tank level indication from empty to full in a clockwise direction. We offer LPG Level Sensor in different specifications.

In order to deliver a high quality lot of products, we make use of the best available resources and raw material. Also, we make sure that the material is sourced from the genuine vendors only. Backed by a hardworking team, we are capable of offering the Level Sensor as per the exact requirements of the buyers.   Features : Provides 10 to 30V dc supply voltage with selectable 4-20 mA or 0-10V dc analog output.       Automatically scales the analog output over the width of the programmed sensing window.       Monitors continuously.       Senses extended range of up to 8 m.       Features ultrasonic dead-zone of only 2.5% of the total range—75% less than comparable product.       Features a completely sealed, shock-resistant housing ideal for monitoring levels of liquids as well as solids.       Available in chemically resistant models with a Teflon® coating to protect the transducer.       Compensates for temperature, for greatest sensing accuracy.       Simplifies setup with push-button and remote TEACH-mode programming.       Shows status during setup and operation, using highly visible LEDs indicators.

The WD-x range is designed to detect water leaks either at localised points using the WD-PS point sensor or larger areas with the WD-CS cable sensor, a rain sensor is also available. All these sensors are used with the WD-AMX range of modules that are suitable for DIN-rail mounting inside AHUs, power distribution units or general areas where leak detection is required. They are fitted as standard with LED indication of the water leak status, and sounder that can be disabled by simply removing a jumper. The WD-AMX relay output can either configured to be manual or auto reset. A relay output provides an alarm signal that can be used for connection to a BMS controller or remote alarm annunciation panel such as the UI-AA1-F WD-CS is easy to lay and detects along its entire length More than one WD-PS can be connected to a WD-AMX Self-contained heater to avoid nuisance alarms on WD-RS

Two-inch conduit openings in new wfd30-2 models ul listed models are nema 4 rated sealed retard mechanism immune to dust and other contaminantsvisual switch activation field replaceable retard mechanism and spdt switches rugged, dual spdt switches enclosed in a durable terminal block accommodates up to 12 awg wire designed for both indooroutdoor use 100 percent synchronization activates both alarm panel and local bell tamper resistant cover screws engineering specifications vane-type waterfl ow detectors shall be installed on system piping as designated on the drawing andor as specifi ed herein. Detectors shall mount on any clear pipe span of the appropriate nominal size, either a vertical upflow or horizontal run, at least 6˝ from any fi ttings which may change water direction, flow rate, or pipe diameter or no closer than 24˝ from a valve or drain. Detectors shall have a sensitivity in the range of 4 to 10 gallons per minute and a static pressure rating of 450 psi* for 2˝ – 8˝ pipes. The detector shall respond to waterflow in the specifi ed direction after a preset time delay which is field adjustable. The delay mechanism shall be a sealed techanical pneumatic unit with visual indication of actuation. The actuation mechanism shall include a polyethylene vane inserted through a hole in the pipe and connected by a mechanical linkage to the delay mechanism. Outputs shall consist of dual spdt switches (form c contacts). Two conduit entrances for standard fi ttings of commonly used electrical conduit shall be provided on the detectors. A grounding provision is provided. Unless noted, enclosures shall be nema 4 listed by underwriters laboratories inc. All detectors shall be listed by underwriters laboratories inc. For indoor or outdoor use. static pressure rating 450 psi* maximum surge 18 feet per second (fps) triggering threshold bandwidth (flow rate) 4-10 gpm conduit entrances two openings for ½ conduit, one open one knock out type contact ratings two sets of sp

We have gained expertise in the domain of Wireless Water Level Detectors that are offered to the customers after stringent quality tests. We manufacture, export and supply highly durable and efficient range of Wireless Water Level Detector from Gujarat. Our globally acclaimed Wireless Water Level Detector is a portable solution for automation. Our affordable range of Wireless Water Level Detector is easy to set up and maintain and equipped with RF wireless technology.

Honeywell Wall Mount Humidity & Temp. Sensor With LCD Display,Output 0…10V, 4%RH , 0.3°C, -5°C to 55°C, Silver cover.  

Fuel Level Sensors, Changeover Switches, Electronic Autogas Device

Water Level Sensor, Float Senso

Water Leak Detection System, Fire Suppression System, Four Wheeler Batterie

Guided Wave Radar, Weld Pad Flat Glass Level Gauge, Magnetic Oil Level Gaug

LPG CNG Level Senso