Acidic Ramming Mass Dealers in Beawar, Ajmer

We are a renowned Manufacturer, Supplier and Exporter of Acidic Silica Ramming Mass. We have well-equipped production units for the processing of Acidic Slica. The packaging is done in sealed containers to prevent its contamination. We make use of quality raw materials for the processing of Acidic Slica. We offer Acidic Slica at the most nominal prices and assure timely delivery.   Details : Granulometric Composition Of Commercial Silica Ramming Mass Size Percentage : 4 mm to 1 mm 33%, 1 mm to 0.20 mm 30%, 0.20 mm to 0.06 mm 17%, 0.06mm & Below 20%Our Acidic Ramming Mass is manufactured under strict supervision of qualified and experienced work force. Proper check is exercised on magnetic process to assure iron free Acidic Ramming Mass and to assure proper composition of granules according to furnace capacity. Furnace Specific Benefits: We are the only manufacturer to give material as per the furnace capacity and make of the user. The granulation of the mix are optimized keeping in view the furnace make and capacity, thus giving maximum and best results. Ramming mix is characterized by thermal stability, corrosion resistance and wear resistance because it contains less binders, fire clay and moisture compared to plastic refractories. Recommended for lining the iron melting coreless induction furnace. Premixed with binder to customer's specifications. Maximum recommended use limit- 3200°F (1700°C)

• Packaging Size: 50 Kg
• Color: White
• Packaging Type: Plastic Bag
• Application: Industrial
• Form: Stone
• Features: Precise composition, Excellent quality , Safely packed

Introduction:The role of Acidic Ramming Mass in steel melting through induction Furnance is very important. Due to its important prop­erty to with stand thermal shocks without developing any cracks due to interrupted power supply which is the case through out our conutry We have taken initiative to develop acidic ramming mass of high quality silica Quartz having heavy dencity.Product:Our ramming mass is a product of super snow white crystalline quartz havmg 99.90% Silicon dioxide (sio2 ) and manufact­ured under strict quality control and calci­ned to eliminate the spal1ing tendancy in stabilized form, where silica neither exponds nor contracts It is suitable for with standing higher temperature upto l720ocSpecifications:Sio2 - 99.90'/.Al2O3 - 0.02%Free from Iron contents Softerning Point : - 1280 CPorosity : 50Compression St : 350 Kg /CM2Bulk Density : 2.00 to 2.2 Ton/M3PCE Value ASTN No : 31-32Important Features: For the first new lining the requirem­ent of Acidic Ramming Mass is almost 50% of the Furnace capacity in weight. Remove iron or steel contents by powerful megnet. It is required to be preheated to 70'-80'C. So as to eliminate moisture during summer months In winter season or rai­ny season. the mass should be preheat­ed at a temperature of 140 o - 150 o C. then after cooling it down to 50 o - 60 o C mix thoroughly 0.8 to 1.5 percent boric acid according to the size of the crucible. Usually 12% of boric acid of medical grade is used for furnaces up to 3 tonn­es Capacity Store the Ramming mass in dry and dust free area. OUR ACIDIC RAMMING MASS Has got three Categories as under­: Grade M1 Suitable up to 1.5 Tonne furnace capacity. Grade M2 Suitable for 2 to 3 Tonne furnace capacity. Grade M3 Suitable For 5 Tonne furnace capacity . In addition to all we guarantee more lining life with our meterial compared to any other. While sending your querries and orders please do specify the capacity of furnace and type of steel you are manufacturing to enable us to give you the correct combination of Material and advise. Application : Our Addic Ramming Mass is used by mixing boric acid 0.8% To 1.5% according to the type of metal Low for Steel and high for cast iron melting. Complete lining guidance can be furnished as required according to the size of furnace Packing : Standard Packing available in 50 kg. HDPE bags & 1 or 1.25 mt Jumbo bags with liner inside, or as per customer requirements.

We offer clients with Acidic Ramming Mass which is useful for various applications. Our range of Acidic Ramming Mass is manufactured under a rigorous production process. The Acidic Ramming Mass available with us is highly demanded in the national and international market. Moreover, we provide customized solution to the clients as per their requirement. Characteristics : Corrosion resistantCan withstand high temperatureAccurate chemical compositionGood thermal strengthResistant against electricityFree from iron oxideHigh refractorinessAvailable in purest form Can be used for metals like : Alloy SteelsAlloy cast ironPlain carbon steels (M.S.)S.G. iron and malleable ironAll graded cast ironSS Steel

• Color: Crystal White
• Packaging Size: 50 Kg
• State: Crystal
• Grade: A
• Application: Industrial
• Features: Safely packed, Excellent quality

Acidic Ramming Mass that we provide is used in the lining of induction furnaces. Quality of Acidic Ramming mass is directly related to the heating performance of the furnaces. Better quality of lining results in the smooth working of furnaces, optimum output and better metallurgical control. Our Acidic Ramming Mass is manufactured under strict supervision of qualified & experienced work force, keeping all these aspects in mind. Proper check is exercised on magnetic process to assure iron free material and to assure proper composition of granules according to furnace capacity. The granulation of the mix is optimized, keeping in view, the furnace make and capacity for best results. Acidic Ramming Mass, provided by us, is characterized by thermal stability, corrosion resistance and wear & tear resistance because it contains less binders, fire clay and moisture compared to plastic refractories. Our superior quality Acidic Ramming Mass is stringently manufactured under strict supervision of qualified and experienced work force. Proper check is exercised on magnetic process to process iron free Acidic ramming mass and to assure proper composition of granules according to furnace capacity. Granulometric Composition Of Commercial Acidic Ramming Mass : Size Percentage : 4 mm to 1 mm 33 % 1 mm to 0.20 mm 30 % 0.20 mm to 0.06 mm 17 % 0.06mm & Below 20 % Basic Ramming Mass : Basic Ramming Mass is suitable for induction Furnaces for production of high quality alloy steel, mild and low allow steel. Furnace Specific Benefits : We are the only manufacturer to give material as per the furnace capacity and make of the user. The granulations of the mix are optimized keeping in view the furnace make and capacity, thus giving maximum and best results. Our Acidic Ramming Mass : Recommended For Lining the iron melting coreless induction furnace Premixed with binder to customer's specifications Maximum recommended use limit - 3092oF (1700oC) We manufacture Ramming mass under completely controlled conditions and the formulation is prepared with consultations of major furnace manufacturers. It is best suited to control : Reactivity of the refractory Temperature in which reactivity takes place Sintering characteristics of the lining Density and strength of the lining

Sun Minerals Acidic Silica Ramming Mass is used in the lining of induction furnaces. Quality of Acidic Ramming mass is directly related to the heating performance of the furnaces. Better quality of lining results in the smooth working of furnaces, optimum output and better metallurgical control. It is manufactured under strict supervision of qualified & experienced work force.Proper check is exercised on magnetic process to assure iron free material and to assure proper composition of granules according to furnace capacity.

We provide the best quality Acidic ramming mass material that is fully compatible with the furnace capacity. It is super snow white crystalline quartz containing 99.90% Silicon dioxide (sio2). It is free from Iron content, manufactured under strict quality control and calcined to eliminate the spalling tendency in stabilized form, where silica neither expands nor contract. It absorbs the higher amount of temperature upto l720oc. It plays an essential role in steel melting also through induction Furnace. It maintains the product quality and provide you always crack less product irrespective of power supply.  Furnace Specific Benefits Various grades of Ramming Mass Keeping in view the different needs, different types of scraps, end products and several other factors, we have got different grades: Normal: This is the widely used grade of Silica Ramming Mix. Silica content here is in the range of 98.50 % to 99.50 %. This is the cheapest grade available. But performance is the best in its category. Normal Premix: This is the pre mixed version. We mix Boric Acid as per customer requirements, although most common in India is 1.1 %. Prefixed Ramming mass we have been the leaders in Promoting premixed use in big capacity induction furnaces. Our all the grades are available in premixed versions also.       Proper mixing of binder leading to optimum mixture. Less wastage, as mixing is done by machines. Only use imported Boric Acid is used to give best results. It has consistent and longer lining and patching life. All the various materials from our product portfolio are available in the following packaging: Break bulk loose.50 kg or 25 kg plastic /PP bags. Big Jumbo bags of 1.20 MT to 1.50 MT. Paper bags can also be arranged at an additional cost. For exports the material is stuffed in 20" heavy duty containers, accommodating upto 27 MT of material. Palletisation and fumigation is also available. Packed Ramming Mass Packaging are subject to normal aging and products in bags should not be stored longer than 6 months. Information concerning waste management etc. can be found in our safety data sheets. The packaging is selected keeping view the specific needs of the user as well as material. For specific requirements of various chemicals, moisture proof export packing is provided.      Important Features For the first new lining, the requirement of Acidic Ramming Mass is almost 50% of the Furnace capacity in weight. Remove iron or steel contents by powerful magnet. It is required to be preheated to 700-800 C. So as to eliminate moisture during summer, winter and rainy season. The mass should be preheated at a temperature of 1400 - 1500 C. Later cool it down to 500 -600 C and mix thoroughly with 0.8 to 1.5 percent boric acid according to the size of the crucible. Usually 12% of boric acid of medical grade is used for furnaces up to 3 tones Capacity. Always store the Ramming mass in dry and dust free area.  Application : Our Acidic Ramming Mass is used by mixing 0.8% to 1.5% boric acid. Mixing depends on the type of metal such as Low for Steel and high for cast iron melting. Complete lining guidance can be furnished as required according to the size of furnace.

Premix Silica Ramming Mass

sesame hulling plants, Pulverizers, Oxygen Cylinder Valves