Automatic Switches Dealers

FEATURES :Automatically turn off the generator on the power rasumption.Restricts unnecessary fuel consumption that save money.Generator ON & Power Supply indicator facility.Available in Single Phase & Three Phase Models.

These semi-automatic and foot switch operated sealers and trim sealers are designed for packaging applications. The Dwell Timer Control system controls an indicator light which signals the operator separately for sealing and cooling cycle. Every pneumatic machine is provided with air cylinder, air filter, oil lubricator, gauge, solenoid valve in suitable capacity and proper range. The machines seal polyethylene and other thermo-plastic films. SALIENT FEATURES Pneumatically controlled semi-automatic operation Seals polyethylene film / bag and any other thermoplastic film / bag quickly and efficiently. Seal Length available from 15” to 40” (depends upon model) Seal width 1 mm, 2 mm, 3 mm, 5 mm, 8 mm Equipped with Digital Timer Two parallel seals are available upon request Provision of Upper & Lower Jaw Heating Element

Detail of automatic changeover switch (single phase) The changeover automatically transfers load from mains to generator and from generator to mains. The selection of changeover is done according to the mains load. Change over is available from 40 amps. to 200 amps.The size of change over varies depending upon the Amps. This product will be installed where the main supply as well as the generator set is of single phase. Detail of Three Phase Automatic Changeover The changeover automatically transfers load from mains to generator and from generator to mains. The selection of changeover is done according to the mains load. The changeover is available from 40 amps to 200 amps. The size of change over varies depending upon the load. This product will be installed where the main supply is of three phase but the generator set is either of single phase or three phase. Detail of Automatic transfer switch The changeover is controlled with the micro controller circuit and different relays are used for mains as well as for generator. The changeover automatically transfers load from mains to generator and from generator to mains. Load for generator to mains is only transferred when the three phases are present. The selection of changeover is done according to the mains load. This changeover is available in KVA .The size of change over varies depending upon the load. This product will be installed where the main supply is of three phase but the generator set is either of single phase or three phase.

The automatic transfer is achieved mostly by automatic mains failure systems. The process of on load transfer has to be monitored & controlled for a smooth Changeover and within safety limits of all elements of the system. This is achieved by Automatic Transfer Switch (ATS). This is achieved by Automatic Transfer Switch (ATS).

We are Automatic Change Over Switches Manufacturer and Supplier in Punjab, India. We utilize specially selected materials and high-tech machinery to fabricate Automatic Change Over Switches. The compact, Automatic Change Over Switches can be acquired in varied technical specifications from us. We are reputed for making available Automatic Change Over Switches in standard as well as customized solutions.

  The automatic transfer is achieved mostly by automatic mains failure systems. The process of on load transfer has to be monitored & controlled for a smooth Changeover and within safety limits of all elements of the system. This is achieved by Automatic Transfer Switch (ATS). This is achieved by Automatic Transfer Switch (ATS).RangeCurrent rating from 100A to 630A in three frame sizes in three pole and four pole execution.  Features   High speed transfer Superior making & breaking capacity Compact & light weight design Positive indication through flag indicator Neutral point transfer Liberal terminals Phase barriers

Intelligent street light controller specially designed for energy Saving in conventional street light systems. By using this controller you can save up to 33% energy by staggering the unwanted lights by midnight (Considering 50 % staggering time). Day light power saving scheme can also save some more energy.Apart from energy saving this can also save manpower, operating cost and can reduce manual operating errors. This controller is programmed on longitude & latitude base for the whole year for sunrise and sunset timings.Sunrise and sunset time changes On day to day basis and in one month there is a time change of about 30 minutes. For entire year sunrise and sunset time changes by about 190 minutes.With these much change of time a conventional timer will not serve the purpose. It can save energy up to 8 % against conventional manual operation, Photo sensors or conventional timers. Our controller incorporates a real time clock with in built battery backup for minimum 8 years. There is no need to reprogram the controller even if supply fails for long duration SpecificationsAdvance Microcontroller based design and real-time clock base systems. Real time clock with inbuilt battery with life of more then 8 years Data protection of user parameter by specially RAM which hold the parameters for more then 10 years with out any power Street light ON / OFF on Longitude, Latitude base sunset and sunrise time generation. Controller operates 365 days on real-time based clock with auto calculate sunrise and sunset times as per geographic location. In built auto recovery systems for power failure which helps in streetlight operation. Month wise civil twilight timings (Day light power saving) which helps precise ON / OFF time in all weathers (Advantage of Sunlight before sunrise and Sunlight after sunset). Password Protection. ( As the systems installed at remote location and in open conditions any body can fingered which create problem for street lighting operation) Scrolling display of events which helps to monitoring the systems. Very easy key board operation. Auto / Manual facility by way of relay operation for faster service mode. User settable On Delay up to 99 minutes between R Y & Y B Settable Individual lines Staggering facility to switch OFF and switch ON lights by late night can save energy when there is no traffics. (Can switch off one phase at 10 P.M. and another phase at 1A.M.) Three mode of staggering system 1) Rotation mode in this one phase will off at predetermine time and phase will selected on date basis to equal burning of all lamp. i.e to day R phase off tomorrow y phase OFF and day After tomorrow B phase will be OFF ( 33 % energy saving ) 2) Alternate phase system in which to day R phase off tomorrow Y and B Phase OFF . For equal burning of lamp. ( 50 % energy saving ) 3) Any phase can be switch off at any time and any time can be ON ( Energy saving in range of 33 to 100 % ) Eight Date range programming facility to disable staggering mode for festival and special occasion. Manual stagger off facility for special requirement. Power redundancy for controller even 1 phase 170 VAC controller can work.Technical Specifications Supply : 3 Phase 230 VAC/ph + / - 25 %, R Y B N 4 Wire supply Systems. 50 Hz (+ / - 10 %) Power Consumption : 2 W (Stand by) 5 W (on full load) Controller : 8 Bit micro controller Programming function : Switching on Longitude & Latitude base Real Time Clock : Inbuilt battery, with battery life of more then 8 years Parameter data protection : With special device which hold the data for more then 10 years without any power and Password protected. Display : 16 character and two lines LCD display with backlight. Contacts : 3 Potential free contacts for normal and staggering Redundancy : Operates up to single phase 170 V Ac By pass : Provision to by pass by way of Auto / manual switch Operating Temperature : 2 to 55' centigrade and humidity 90 % non-condensing Advantages No frequent time to be change according to season. Redundant Power supply to controller. Any phase up to 150 Volt controller will work and contactor will be operated up to 170 VAC Real-Time Clock with very high life of more then 5 years. No Battery.

We are a well-known Automatic Power Transfer Switch Manufacturer and Supplier from India. Our Automatic Power Transfer Switch finds application in malls, buildings, etc. We design ACB base Automatic Power Transfer Switch in load ranging from 800 amp. to 3200 amp. This Automatic Power Transfer Switch comes with kwh meter.