VIRSUN INDUSTRIES Matsya Industrial Area, Alwar, Rajasthan

Advantages:  Easy to apply Water resistance Anti fungal Good compressive strength Good tensile strength Covers undulations of plastered surfaces

Number Of Flower : Wall Putty

Application : Wall Coating

Packaging Size : 10kg, 25kg

Brand Name : Virsun

Application : Designed for interior and exteriors surfaces, To make uneven surfaces to even and smooth surfaces

Virsun S-901 Super Flexible Latex Admix is an extraordinarily flexible latex additive for use with thin set adhesives and other cement mixes.Virsun 901 Super Flexible admix Is specially formulated to provide a strong, super flexible bond to most surfaces, Including plywood. Recommended for Interior and exterior' use with VIRSUN Premium Thin-Set adhesive. 'Used in place of water with thin-set adhesive for Installing: ceramic tile, brick, natural stone, porcelain file on Plywood and variety of substrates.Advantages: Makes high strength shock resistant adhesive. Exceeds ANSI A118.4 shear bond strength requirements Strong, super flexible bond to many surfaces Safe and water cleanable, non-hazardous, Non-flammable liquid. Easy to use Sag-resistant Suitable Substrates Concrete Cement Mortar Beds Ceramic Tile and Stones Concrete Masonry Cement Backer Board' Cement Plaster Brick Masonry Exterior Grade Plywood" Asphalt Adhesives' Plastic Laminate' Cement Terrazzo Gypsum Wallboard" Vinyl or Other Resilient files" Inferior use only. 'Consult cement backer board manufacturer for specific Installation recommendations and to verify acceptability for exterior use.   Coverage : Coverage Approx. 55-60 sft per 20-liter pail using 1/4" x 1/4" (6 x 6 mm) square notch trowel. Coverage will vary depending on trowel notch size, type, and site of the and substrate Shelf Ufe Factory sealed containers of this product are guaranteed to be of first quality tor two (2) years if stored at temperatures >32 DegreeF (CPC).

Brand Name : Virsun

Feature : Safe and water cleanable, non-hazardous, Non-flammable liquid

Virsun S-57 Crete Admix is liquid latex admix mixed with Tile adhesive made with Virsun S-57 Crete Admix is more flexible and stronger than conventional Portland cement mortars. This strong bond Is especially important when vitreous and semi-vitreous tiles are installed and also for installation of natural stone and tile on the external wall. Application Vitrified files, ceramic tiles and natural stone in demanding areas. such as external facades, factories, and loading areas, should be set in Virsun S-57 Crete Admix mixed with VS Crete Filler Powder, because of the exceptionally strong bonding, shock and Impact resistance it gives to the adhesive. Advantages: Increased flexibility improved shock & impact resistance improved compressive strength Reduced water absorption Secure bond for vitrified tiles Suitable Substrates Concrete Brick Masonry Cement Plaster Concrete Masonry Cement Mortar Beds Ceramic Tile and Stone Gypsum Wallboard. Cement Terrazzo   Coverage: Cement Backer Board "Interior applications only Packaging 20 liter Pat, Coverage Approx 200sft per 201fte using 1/4 Degree x 1/4" (6mrn x 6mm) square notched trowel for a bed of 3mm. Coverage will vary depending on trowel notch size, type and size of the and substrate Shelf Life.   Factory sealed containers of this product are guaranteed to be of first quality for two (2) years If stored at temperatures 41 Degree F (5 Degree C).

Brand Name : Virsun

Virsun S-1198 Crete Admix is specially designed latex additive for use with Virsun Crete Filler Powder to make high strength latex thin-set adhesive. The Adhesive made with Virsun 1198 Is suitable for Installing all types of ceramic tile, Vitrified tile, natural stone, and agglomerates. Also for use with Portland cement to make slurry bond coats for mortar beds to give the Improved performance and longer open time. To achieve longer open time under tropical or desert conditions, installation recommendations. Application Used for installation of all types of cc tile, VBrBed tile, brick. natural stone and agglomerates S-1198 Latex admix offers the speed and economy of Portland cement based adhesives with permanent, water-resistant dependability.Advantages: Superior shear bond strength - greater than ANSI A118.4 requirements. Suff able Substrates Concrete Cement Terrazzo Brick Masonry Cement Plaster Concrete Masonry Cement Backer Board" Cement Mortar Beds Ceramic Tile and Stone Gypsum Wallboard (Interior Only) 'Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.   Coverage : Coverage Approximately 200 sft per 20 liter using a 1/4' x 1/4 Degree (6mm x 6mm) notched trowel Coverage will vary depending on trowel notch size, type and size of the and substrate Shelf Life Factory sealed containers of this product are guaranteed to be of first quality for two (2)years If stored indoors and off the ground at temperatures >32 DegreeF (0 DegreeC).

Brand Name : Virsun

Virsun S-114 Crete Admix is a concentrated latex admix which Is diluted with water on site and then mixed with VIRSUN -229 to make thick bed adhesive, cement piasters, mortar beds, and screeds. Portend cement mortars which have been modified with Virsun -229 have greatly improved physical characteristics and can be used in exterior, interior, as well as underwater plasters, screeds, and renders. Virsun S-114 can also be used as a primer coat on various drywall boards like Gypsum wall boards, cement backer boards, Calcium Silicate boards, and wood panicle boards before installation of tiles/stones.   Advantages: Greatly Improved compressive strength Improved adhesion More plastic mortars Can be used as the primer for various drywall boards before tile and stone installation. Can be used as a key coat mixing with cement and sand. Can be used for repairs& patching of concrete.   Coverage :  12 mm 50 kg 1.25 litre 3.75 litre 25 sft 25 mm 50 kg 1 litre 4 litre 8 sft 50 mm 50 kg 0.83 litre 4.17 litre   We 5 sft Shelf Life Factory sealed containers of this product are guaranteed to be of first quality for two (2) years if stored at temperatures >32 Degree F (0 Degree C)

Brand Name : Virsun

Application : Thin bed mortar for laying blocks Smoothing over the block work As Adhesive to install tiles

<p>To offer our purchasers top-notch range of products, we ensure only optimum grade supplies are utilized for their production. To protect our entire range of products from external factors that can be damaging, we have a state-of-the-art packaging unit equipped with the latest secure packaging technologies and materials.</p>

Number Of Flower : Tile Spacers, Other

Material : Brass, Mild Steel, Nickel Silver, Rubbers, Stainless Steel, Other

Shape : Round, Square, Triangular, Other

Thickness : 10-12mm, 12-14mm, 14-16mm, 16-18mm, 18-20mm, 4-5mm, 5-6mm, 6-8mm, 8-10mm, Other

Certifications : ISO 9001:2008

Tile Grout Admixstrong is a superior quality cementitious grout with hydrophobic properties that allow tile joints to resist water. Aqua Stick consists of the carefully prepared blend of Portland cement, chemical additives, and fillers. It is easy to install - just mix with water or Virsun Grout admix plus. Aqua Stick is ideal for floors and walls in both exterior and interior applications. For better performance, it is recommended to use Aqua Stick with VIRSUN Grout admix plus. Application Used for filling tile joints 1- 3mm in both interior and exterior areas, ceramic, vitrified, non-vitreous clay tile, natural stone and engineered stone/ agglomerates.

Feature : Non-shrinking & non-cracking

SUNILL TILE GROUT With immense market knowledge, we have been able to provide optimum quality Polymer Based Cementitious Grout.   Features Non Cracking Non Shrinking Easy Application Uniform Color

Country of Origin : India

Number Of Flower : Powdered Tile Grout

Feature : Good Quality, Highly Durable, Non-cracking, Non-shrinking

Advantage : Easy To Install

Joint width : 2mm - 6mm

Water Demand : 30%

Packaging Type : TILE GROUT

Virsun Apex Wall Adhesives BIS 15477 standard and en 1348 standard a high-performance dry adhesive for use with water or latex for installing ceramic tiles, marble and stone using the thin-set installation method. For use In floor and wall Installations, It has high track and will hang walltIlewIlhout slippage. the tiles can be made Degree, cotton, double fired, single fired ceramic. Fixing poorly absorbent materials or non-absorbent materials such as single-fired tel refine porcelain stoneware and vIltlflecitIles. Suitable for use when high performances are required,such as tile fixing In Industrial environment or Una on fop of old ceramic tiles or natural stone indoors in swimming pools or on facades.Application Designed especially for interior & exterior door & wall installations of all types of tiles & stones.AdvantagesDual use For both Floor & wallsExcellent non-sag formulaSmooth, easy to useImproved impact resistanceIncreased flexibilitySuitable SubstratesExtenor Grade Plywood (interior use only)Cement mortar Bed/PlasterCeramic Tile & StoneCeramic Backer BoardGypsum Wallboard (interior use only)Concrete MasonryCement TerrazzoCoverage Approx.55-60 sq.ft. per 20 kg bag using a 1/4"x1/4" (6mmx6mm) notch trowel for a bed of 3mm.Color Grey & WhiteWeber Nova grey, myk 302 ultratech high strength stone adhesive

Country of Origin : India

Number Of Flower : Stone Adhesive

Material : BOPP Film

Application : Tile & Stone Fixing

Feature : Antistatic, Heat Resistant, Holographic, Printed, Waterproof

Width : 0-10cm, 10-20cm, 20-30cm, 40-50cm, 80-90cm

Adhesive : POWDER

Brand Name : APEX STONE ADHESIVE

Classification : BIS APROVED

Raw Material : SILICA AND CEMENT

Brand Name : APAX STONE ADHESIVE

VIRSUN PLATINUMSubstrate: The surface to be covered with Ceramic tile shall be sound and confirm to good design, rigid, clean and free of dirt, oil, grease, curing compounds, form release agents or loose plaster and paint. For economy the surfaces should be level and true with in: Walls – 3mm in 2.5m Floors – 1.5mm in 1.0m Surface Preparation:If a plaster/leveling mortar bed is applied, ensure that it is cured for at least 7 days to achieve proper strength before application of tile adhesive for installation of tileEnsure the substrate is clean and free from impurities like dust, dirt, debris, oil, grease, curing agents, loose plaster etcDampen the wall before application of thin set adhesiveClean the back of tile for any dust or coatingMixing: The products can be mixed by hand or slow speed electric drill mixer (less than 300 rpm). Pour potable clean water in a clean container and then add the powder VIRSUN PLATINUM and mix until the mixture becomes creamy and plastic. Do not over mix. Leave the mix to slake for 5-10 min and remix before use. Mix only sufficient quantity of adhesive for immediate need. Proportion: Approximately 1 bag of VIRSUN PLATINUM  with 5-6 ltrs of water. Adjust quantity of liquid to obtain proper consistency. Installation:Wet the surface and remove the excess water before applying the adhesive. Ensure the area is shaded from sunlight. The adhesive shall be applied with the flat side of the trowel using a scraping motion to work the material into good contact with the surface to be covered.Additional mortar is then applied with the notched edge of the trowel.When installing large tiles, spread adhesive onto back of tile in addition to trowelling material over surface to be tiled. Select proper type of notched trowel.a) Thin Tiles upto size 300 X 300 mm (1’X1’), use a square notched trowel of size 6mm X 6mm to provide a total thickness of 3mmb) Large Porcelain Tiles upto 450 X 450 mm with ribs, use a square notched trowel of size 6mm X 6mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 4.5mmc) Large Porcelain Tiles upto 600 X 600 mm (2’X2’) with ribs, use a square notched trowel of size 6mm X 9mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 6mmThe most important standard to keep in mind is to insure that the piece of tile is completely bedded in the mortar or adhesive with 100% coverage.Rear face of tiles (especially Porcelain tiles) should be cleaned with damp sponge to clean all the dust. Do not saturate in water.Excess mortar on adhesive shall be cleaned from the surface of the stone with wet cloth or sponge while the mortar is fresh.Coverage Approx. 55-60 sq. ft. per 20 kg bag with a ¼” x ¼” (6mmx6mm) square notch trowel for a bed of 3mm. Color GreyAreas of Application Designed for internal floor applications   Suitable SubstratesCement Mortar BedsCement PlasterBrick MasonryCement Terrazzo 

Country of Origin : India

Number Of Flower : Tile Adhesives

Application : Tile Fixing

Brand Name : Active

Brand Name : Virsun

SunWater proofing-1805 Waterproofing Membrane is a roller applied liquid rubber that forms a waterproof membrane for use under thin & thick bed installations of ceramic tile and stone, and other finishes. Application Recommended for residential and commercial floor and wall installations such as: Kitchen, bathrooms, gang showers and balconies. Also for use as a crack suppression membrane with reinforcing fabric. (over hairline nonstructural cracks up to 1/8 Degree (3mm)). For interior and exterior applications. Note: Membrane reinforcing fabric for coves, comers and board joints sold separately. Roll 6" (15cm)wide x 75' (22.85m) long.   Advantages: Fast & Easy to install -applies like paint Proven history Suitable Substrates Concrete Cement Modal Beds Cement Backer Board Exterior Grade Plywood. Gypsum Wallboard. Concrete Mason Cement Terrazzo Brick Masonry Cement Piaster Interior use only

Brand Name : Virsun

Feature : Non-flammable, Water cleanable when fresh

Advantages : White cement based 2-in-1 Wall Putty White, smooth & glossy finish Protects paint from moisture Curing is not required Ideal for interior & exterior walls Application : Clean & Pre wet the plaster surface before applying Stark Putty. Make a Stark Putty paste which can be used in 2 hours time. Apply the first coat of putty on pre wet surface from bottom to upward direction with putty blade. After drying of first coat of putty clean the surface with smooth dry cloth followed by wet cloth. Apply second coat of putty after about 3.0 hrs of first coat. Allow the surface to dry for minimum 12 hours. The Putty to be applied in two coats at a maximum thickness of 1.5 mm. During application of putty the surface should be protected from direct sunlight till the two coats of putty are dried. Designed for interior and exteriors surfaces. To make uneven surfaces to even and smooth surfaces

Brand Name : SUN WALLPUTTY

<p>Sun Tile Cleaner is a concentrate to be diluted with potable water as per need to clean all surfaces. It is non-toxic cleaner which can be used for daily maintenance as well as remove tough stains. This neutral pH cleaner makes it most suitable for cleaning marbles and other calcium-based stones. Sun Cleaners is also recommended for regular maintenance of sealed stone surfaces. It is effective and easy to use. <br /><br /><strong>Areas Of Application:</strong> Interior &amp; exterior areas Kitchens Floor &amp; Wall Bathrooms, Floor &amp; Wall Counter Tops Commercial floors. <br /><br /><strong>Use:</strong></p> <ul> <li>Mix 1 part of sun cleaners to 3 parts of hot water</li> <li>Apply over the stained area and scrub with the medium soft brush. Let it stay for 10-15 minutes and keep scrubbing periodically.</li> <li>Clean the surface with warm water for better results.</li> </ul> <p><br /><strong>For Regular Floor Cleaning</strong>: Dilute sun in the ratio of 1: 10 with clean water for a general day to day cleaning of the floor.<br /><strong><br />Cautions:</strong> Store in cool place away from heat and fire. Avoid contact with skin and eyes. Do not inhale and use it in open ventilated areas. Do not swallow and wear gloves during application.</p>

Application : For hard stains like oil, grease and fats

Brand Name : Virsun

Packaging Size : 1 Ltr

Advantages : Colourfast Uniform Color Weather resistant and easy maintenance Non-shrinking and non-cracking Easy to apply and clean No wet curing required when used with latex        Application : Institutional kitchens Cafeterias Institutional facilities Swimming pools Restrooms Schools Advantages Stain-free Colourfast Easy to install and clean Chemical and temperature resistant Non-cracking or powdering Water cleanable when fresh

Brand Name : Virsun

Raw Material : Cement And Sand

Feature : Easy Application, Easy to apply and clean, Non cracking & non shrinking

Features : Single component, ready to use Proven performance      Application : Best suited for Exterior and Interior installation of ceramic/ vitrified/ Porcelain /Engineered stones and Natural Stones.

Advantages : Colour fast Weather resistant and easy maintenance Non-shrinking and non-cracking Easy to apply and clean No wet curing required when used with latex   Application : Institutional kitchens Cafeterias Institutional facilities    Swimming pools Rest rooms Schools Advantages Stainfree Colour fast

Raw Material : Cement And Sand

For the attainment of complete client satisfaction, we offer them both online or offline payment procedures. In addition to this, we guarantee safe and secure transactions. We comprehend that natural and physical damages can cause harm to goods and hamper with the quality. Therefore, we make sure our products are wrapped firmly with superior packaging supplies.

Number Of Flower : 2/ 3 COMPONENT

Brand Name : SUN 555

Raw Material : Cement And Sand

Brand Name : SUN EPOXY 555

Packaging Type : ALL

Feature : Easy Application, Easy to apply and clean, Non cracking & non shrinking

Advantages : Easy to apply Water resistance Anti fungal Good compressive strength Good tensile strength Covers undulations of plastered surfaces Application : Designed for interior and exteriors surfaces. To make uneven surfaces to even and smooth surfaces.

ready mix powder is a factory Prepared blend of carefully selected raw materials, Portland cement, and graded fillers. Designed for use with water and aggregates to produce high strength, water retaining & self-curing screed that meets and exceeds the requirements of National and International Standards. Application For interior and exterior floor screeds.   Coverage: Thickness VIRSUN Aggregates Coverage will be based on following mix design. The grain size matrix has to be uniformly distributed up to a size of 8mm. We need approx 8-10 Itrs of water for an ideal mix. Adjust the water content depending on the site conditions. Shelf Life Factory sea led containers of this product are guaranteed to be of first quality for one (1) year if stored off the ground In a dry area. 'High humidity will reduce the shelf life of bagged product limitations Installer: While installing tile/stone on the external walls and floors, we need to provide the movement joints by creating spaces between the tiles/stones and filling them up with Vir Sun cement based grout mixed with 555 grout admix plus or silicone sealants.   It is also important to note that the exterior tile / stone installations are provided with joints (spaces) on the periphery of the area without allowing the tile / stone to be bound by the peripheral masonry work or plaster. It is also important to note that the tiles/stones are not installed directly on expansion joints. The expansion Joints need to be run through the the / stone work till top surface and filled with materials which accommodate the movements. Cautions During cold weather, protect finished work from traffic until fully cured. Contains Portland cement. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water. Do not take Internally. Avoid breathing dust. Wear a respirator In dusty areas. Keep out of reach of children Technical Data Performance Properties Virsun Screed-198 Virsun 198 mixed with aggregate and water Pot Life Approx 1 hour Time to Foot Traffic Approx 24 hours Time to Heavy Traffic 72 hours Specifications subject to change without notification. Results shown are typical but reflect test procedures used. Actual field performance will depend on installation methods and site conditions. INSTALLATION Surface Preparation All surfaces should be between 40 o F(4oC) and 90oF (32oC) and structurally sound, clean and free of all dirt, oil, grease, loose peeling paint, concrete sealers or curing compounds. Dry, dusty concrete slabs or masonry should be dampened and excess water swept off. Installation may be made on a damp surface. All slabs must be plumb and true to within 1/4"(6mm) in 10 Nam). Follow the standard rules of creating the movement joints for Adhered screeds, Floating screeds and the thicknesses of respective screeds as per the International standards For better performance of screeds, it is also recommended to use wire mesh as specified by the engineer at site. Expansion joints shall be provided through the tile work from all construction or expansion joints in the substrate.

Country of Origin : India

Number Of Flower : Ready Mix Plaster

Brand Name : Ready Mixture

Certification : ISI Certified

Form : Powder

Brand Name : SUN READY MIX PLASTER

Packaging Size : 40kg

We are supported by a team of proficient personnel who aid us completely and lay special emphasis on the packaging of the products so as to avoid any damage during transit. With the due assistance of our deft professionals, we are making available top-of-the-line quality products from Alwar(India).

Packaging Type : ALL

Packaging Size : 1 KG

Packaging Size : 5kg, 20 Kg, 50 kg

Raw Material : Cement And Sand

Number Of Flower : Polymer Based

Virsun classic Floor Tile Adhesive is bis apoved isi standard is 15477:2019 type 1standrd en  1348 a bagged cementitious powder to be mixed with water for installing ceramic the and natural stone using the thin-set method of Installation. Tile adhesives are a factory prepared blend of carefully selected raw materials. Portland cement and graded aggregates (Latex) are added to adhesive powders to increase bond strength. Best suited for Exterior and Interior Installation of ceramic/ vitrified/ Porcelain/Engineered stones and Natural Stones. ApplicationsBest suited for Exterior and Interior installation of ceramic/ vitrified/ Porcelain /Engineered stones and Natural Stones.AdvantagesSingle component, ready to useProven performanceHigh strength formula & ultimate flexibilityIdeal for external facades and underwater applicationSuitable SubstratesCernen1 Mortar BedCement PlasterBrick MasonryCernentTerrazzoFeaturesSingle component, ready to useProven performance.

Country of Origin : India

Brand Name : CLASSIC WALL TILE ADHESIVE

Form : Powder

Advantages : Colour fast Weather resistant and easy maintenance Non-shrinking and non-cracking Easy to apply and clean No wet curing required when used with latex        Application : Institutional kitchens Cafeterias Institutional facilities Swimming pools Rest rooms Schools Advantages Stainfree Colour - fast Easy to install and clean Chemical and temperature resistant Non-cracking or powdering Water cleanable when fresh

Number Of Flower : 2/3 COMPONENT

Brand Name : SUN 555

Availability : 5.5 KG

Raw Material : HARDNER & RESIN

Packaging Type : ALL

Packaging Type : 1200

Features : Permanent tile fixing resistant to complete immersion Excellent quality Cost-effective Application : Can be used for interior applications on floors and walls over masonary, concrete, mortar beds and cement plaster. 

Application : Suited For Exterior And Interior Installation Of Tiles