Friends Agro Industries Amritsar, Punjab

This Special Dual Machine is used for Cold Lamination along with Window Lamination. As the Name Suggest, Any box with a window or open cut out of any shape can be laminated through this Machine only like Garments see through boxes, Sweet Boxes, Dry Fruit Boxes, Fancy Packaging Boxes, etc. This Machine Scrap out the Excess Gum and make a successful see through laminated sheet.   Size 26" (660 mm) 32" (810 mm) 36" (915 mm) 42" (1065 mm) Max. Laminating Width 660 mm x any length 810 mm x any length 915 mm x any length 1065 mm x any length Speed 0-600 mt. /Hr. 0-550 mt./Hr. 0-500 mt./Hr. 0-500 mt./Hr. Max. Film Roll Width 660 mm 810 mm 915 mm 1065 mm Max. Film Roll Diameter 305 mm 305 mm 305 mm 305 mm Power Required 220V D.C. Motor 0.8 KW 1.2 KW 1.5 KW 1.5 KW Floor Space LxWxH 1600 x 1270 x 1525 mm 1780 x 1425 x 1525 mm 1930 x 1525 x 1525 mm 2085 x 1680 x 1525 mm Weight Aprox. 1000 Kg. 1400 Kg. 1600 Kg. 1800 Kg.

This is also known as Hot / Heat Lamination Machine. As the name suggests, Machine is equipped with heater Roll to Heat the Wax Coated film. The Machine Laminates the Heated Film to the other Sheet using heated rollers and Hydraulic Pressure system under strong pressure improves the bond strength of the laminate.   Lamination width 26" ( 660mm) 32" (810 mm) 36" (915 mm) 42" (1065 mm) Max. Speed/Hour 900 Ft 900 Ft 900 Ft 900 Ft Electric REQ. 1.5 HP 2 HP 2 HP 3 HP Film roll diameter 12" 12" 12" 12" Roller width 26" 32" 38" 44" Heating Load for hot section 3kw 4kw 5kw 6kw

FEATURES: Construction and operation : Enabled with rollers are bearing mounted Provided with one pre-heaters apart from the three regular heaters to de-moisturize the liner Equipped with twin shaft motorized self loading reel stand & bull Construction and Operation & bull : The flute rollers are mounted on bearings for smooth running & longer life The flute rollers are made of special alloy steel & bull The main bearings are lubricated with high temperature grease Enabled with gum rollers that are hard chromed for better performance & life Two pre-heaters are provided to de-moisturize the paper The variable speed motor is recommended for better quality and economy in wastage at an additional cost Capacity to lift up to 1 ton reel Variable drive motor is standard with this model Provided with 'Jumbo' type motorized Hydraulic reel stand can be at an additional cost  Single facer finger type / fingerless

  Specifications Body     This strongly bold new design oblique type machine is compact size easy to operate saves precious space in factory economical labour saving and less maintenance required The machine has Hydraulic / motorized self loading twin shaft reel stand with three unwinding shafts for paper reels are provided Rolls   Flute rolls are the most important features of the machine are minutely finished give perfect formation on the board The flute rolls are mounted on Heavy Duty Spherical Roller Bearings for longer life The flute rolls are made of special alloy steel for better performance and life Two sets of any two types of flute rolls for immediate and trouble free changeover of fluting medium in just few minutes with motorized lifting and lowering of flute roll assembly

This is very commonly used Machine, where the gum tray is present to hold the bonding agent (gum) dissolved into a liquid (water or a solvent or a solution), is applied to one of the webs. The adhesive coated web is laminated to the other under strong pressure which improves the bond strength of the laminate. It is commonly used to produce a Duplex sheets / paper-aluminum foil laminate that are widely used in flexible packaging.   Size   26″ (660 mm) 32″ (810 mm) 36″ (915 mm) 42″ (1065 mm) Max. Laminating Width 660 mm x any length 810 mm x any length 915 mm x any length 1065 mm x any length Speed 0-600 mt. /Hr. 0-550 mt./Hr. 0-500 mt./Hr. 0-500 mt./Hr. Max. Film Roll Width 660 mm 810 mm 915 mm 1065 mm Max. Film Roll Diameter 305 mm 305 mm 305 mm 305 mm Power Required 220V D.C. Motor 0.8 KW 1.2 KW 1.5 KW 1.5 KW Floor Space LxWxH 1600 x 1270 x 1525 mm 1780 x 1425 x 1525 mm 1930 x 1525 x 1525 mm 2085 x 1680 x 1525 mm Weight Apx. 1000 Kg. 1400 Kg. 1600 Kg. 1800 Kg.

The new and dynamic growth market of digital printing has also gained in every respect from the company’s undertaking only to produce the best possible machines. In the small and middle format sector, genuine, professional Non Programmable Non Hydraulic cutting machines are available at conditions which are very advantageous, both from a technical and economic point of view. These Machines completely work on Motorized Pressure.    Features   Precision Cutting Motorized Back Gauge with manual mechanism for fine adjustments Two front Push button control Photo cell & operational safety devices Extended side tables for stocks in progress & side plates on rear table Foot Clamping & Central lubrication Cross parallel grooves on the knife plate to avoid displacement even under heavy pressure Lighting on cutting line Fly wheel & V belts are protected by a metal guard Locking device is provided on the fast threaded spindle to prevent dislocation of back gauge against pressure of pile Multi disc clutch transmits positive slip less drive with minimum maintenance Knife is easily changeable as well as adjustable by eccentric levers Cross parallel grooves on the knife plate provided to avoid displacement even under heavy pressure

Our products are packed according to the requirement of buyers, as we provide customized packaging solutions. Our packages are superior, secure and waterproof as well. Serving the markets of Punjab(India) and nearby area, we offer top-notch quality range.

The main driving shaft is equipped with two sets of double helical self-lubricated imported polyamidesteel pinion.Main electric panel (operation and control) are equipped with Detachable Socket System with international standardized components i.e. SiemensL&TSchneider (France) etc.Quick and simple adjustment of impressions is made through two worm gears and eccentric bushes in the cam for left-right and up-down of platen to make the four corners equal.All features that make the "FRIENDS" Platen Punching Machine most simple, reliable and maintenance free.

Reel to Sheet Cutter machine is designed to cut paper as well as 2 ply corrugated board (without damaging the flutes) in the form of sheets. This machine can be used as an independent unit or can be attached to a corrugating machine for direct & accurate sheet cutting. The cutting length can be infinitely varied in between the range (1.5) with a PIV gear box, comprising of imported chain. The belts convey the cut paper or 2 ply for manual collection. Separate reel stand is provided for paper cutting. The variable speed motor is provided as standard with this model. Reel to Sheet Cutter is also available without PIV Gear Box.

Size : 54"

Hand fed sheet pasting machine is useful for gluing fluted side of board for making 3, 5, 7 ply corrugated board.In the interest of product upgradationimprovement, the manufacturer reserves the right to change the specifications and features without notice.

This Machine is used for last and final operation in box making. Parts are standardized and interchangeable. Machine is capable of continous running at high speed. Design of the Machine is universal & world famous. Very easy in operation, servicing & repairing.

There is No Need for extra machine for hot foil stamping. You just put this Hot Foil Stamping Attachment on Die Cutting Machine & You are ready for Hot Stamping. Saves your great Costs. Comes in Two Models, With Single Roll, With Double Pull , so you can have up to Two impressions at a time.In the interest of product upgradationimprovement, the manufacturer reserves the right to change the specifications and features without notice.

Small labels printed on adhesive coated sheet needs cutting without cutting the lower attatched paper, so a most suitable machine is needed to cut this printed sheet, without cutting the lower paper attatched to the adhesive coated printed sheet.

The High Speed Friends Make 115 EMC ,Cutting Machine is specifically Designed to cut board, Plastics, Aluminum, PVC Film, Wood Veneers, Asbestos board, Emery Cloth, Rubber and Leather as well as other Sheet Material that is to be cut with precision and speed. The Friends Makes 115 EMC, High Speed Cutting Machine is a high performance machine designed specifically for the Paper Mills, Offset printers, Print shops, Book Binders , Copier paper industry & stationary industry.

This machine is designed for cutting, creasing and punching of corrugated sheets. This high speed machine is an ideal substitute for scorring (Rotary), slotting and additionally gives higher productivity. It is equipped with Chain feeding ensuring easy operation & helps in easy feeding of warp board. Die cutting roller is made of high quality steel with hard chromed plating. Upward roller can move 40 mm from left to right & can protect the American cue rubber roller. This machine is equipped with rubber turning system. We can directly process the damaged part of rubber after long use. Kick feed and lead edge (vacuum) fed models are also available. Technical Specifications

Cutting and Creasing is the initial process carried out in the manufacture of a corrugated box. It is simultaneously carried over this machine. Two pairs of shafts have creasing and cutting heads mounted on them which can be easily set as required. Depending upon the thickness of the board (3 ply, 5 ply, 7 ply, 9 ply), separate creases are to be used. The sheets are piled on the feed table and fed through the machine by hand.

In the interest of product upgradationimprovement, the manufacturer reserves the right to change the specifications and features without notice.

Friction clutch system for maximum efficiency and minimum maintenance. Rapid type hand clamp and Foot Clamp for smooth and easy operation Easy replacement of knife. Fine adjustment of knife height by eccentric levers. Adjustable back gauge for accurate parallelism with knife edge. Device provided with locking arrangement to avoid shift in the position of back gauge during operation. Safety and saving of space. Centralised lubrication of moving parts.

In the interest of product upgradationimprovement, the manufacturer reserves the right to change the specifications and features without notice.

We are involved in offering a wide range of Paper Cutting Machines to our most valued clients. Our range of Paper Cutting Machines are widely appreciated by our clients which are situated all round the nation.Machine with Electromagnetic Clutch and Brake System , heavy duty spring clamping system , Photo cell for hand safety of operator , auto-Measure back gauge system , Lubrication oil pump system , Extended side tables for easy paper handling and storage , Lighting provided on cutting line , Stain Steel Plate on front of the bed to avoid Rusting , Two ISI Electric Motors with machines.

Flexo Board Printer Sheet Fed For Paper, Board For Printing Kraft paper and corrugated boards. Only our machine can print both the paper and corrugated boards .Distinct and precise impression, instant drying, extremely simple to operate, easy accessibility for cleaning. Flexo graphic Printing System is used for transfer of image in Corrugation Printing Machine. The image is transferred through rubber stereos or polymer stereos of 3mm 5 mm thickness. The stereos are mounted on the printing cylinder by means of Double side adhesive Tape. Ink is transferred to the stereos from rubberized inking and transfer rollers. Even flow of ink is possible by micro adjustment of rollers. BoardBoxesSheetBag is fed manually and precisely taken-up automatically by the Registration Mechanism For Accurate Printing in two colour machine to print the image exactly where desired in two colors.

Friends Engineering Company offers a very Specialsed Model of Semi Automatic Paper Cutting Machine, please go through the under mentioned Strong Points for more information. Salient Features Friction clutch system for maximum efficiency and minimum maintenance. Rapid type hand clamp and Foot Clamp for smooth and easy operation Easy replacement of knife. Fine adjustment of knife height by eccentric levers. Adjustable back gauge for accurate parallelism with knife edge. Device provided with locking arrangement to avoid shift in the position of back gauge during operation. Safety and saving of space. Centralised lubrication of moving parts.

The next process after cutting and creasing of the sheet is slotting and corner cutting. It is simultaneously carried over this machine. Three slotting and one corner cutting die can be easily adjusted by gear rack mechanism. The upper dies move in an arc so that the board is slotted in a shearing manner. Two guides are provided on the feed table to support the sheets while cutting.