Network Gateways Dealers

We build hardware platforms that are easy to connect to your systems. With standards like Modbus RTU and Modbus TCPIP , wide variety of PLCs. energy meters and data loggers can connected to our Nodes easily. Our GPRS based node, can be configured remotely and you start logging your data within hours.

Smsfactory is also a Two way sms gateway india. 2 way sms gateway india is necessary to send Two way sms free trial for short code as well as text messages. Smsfactory is one of the prominent short Code Providers in india. The Two way sms service or two way sms messaging is a type of two way communication in which you can immediately respond to the message. Two way messaging supports Two way messages via short code service. You can buy short code keyword from smsfactory to deliver 2 way sms messaging anywhere in india, 2way sms service is necessary for the users which like to send text message as well as want to know the respond of the recipient to the message. We provide a keyword of your Choice or Brand to deliver short code messages in india. There are many short codes in india for short code service india. Short code providers in india. Short code service provider provides short code keyword for Short code messaging.

The ModBus RTU GPRS IOT Gateway is a fully plug and play IOT device which enables any ModBus slave device(s) to be connected to cloud server in minutes. There is no coding needed. It comes with inbuilt ModBus master capability and also other intelligence needed to communicate with any cloud server. It is remotely configurable via our Web configuration portal for user settings such as slave id, register addresses, data type, server url, data transfer rate etc. Even a technician can configure and get the automation running in minutes. If Tangent Cloud IOT platform is selected as the server, the user can visualise the modbus data in Tangent cloud dashboard in form of graphs, widgets, alerts etc.

ISDN Gateway Matrix Simado GBR42 is one such GSM Gateway equipment offering interfaces for four GSM and two ISDN BRI ports. It can be used with any brand of existing PBX or even in a stand-alone mode. Simado GBR42 supports flexible and intelligent Least Cost Routing (LCR) options providing significant cost savings and round-the-clock connectivity.

The MVI46 Modbus Plus Dual Port Network Interface Module allow Rockwell Automation SLC processors to connect directly on Modbus Plus networks as a peer. The module acts as an inputoutput module between the Modbus Plus network and the processor. Compatible devices can be found in most industries and include devices such as drives, relays and power monitor hardware.

We make available, the GSM Gateway System, which has 8 SIM Card slots and is very lightweight (1-1.2kg). The wide range of products is a result of intense quality analysis of raw materials at the initial stages of production. With stern checking, the products are examined with utmost precision. We are working with a group of quality examiners who conduct several tests on the offered lot for confirming its compliance with the quality standards.

 GW1102-2D(RS-232) is an industrial Ethernet Modbus gateway that converts between Modbus TCP and Modbus RTU/ASCII protocols. It provides 2 port RS-232 serial (RJ45) and 1 port 10/100M Ethernet.Modbus TCP, Modbus RTU and Modbus ASCII protocol are integrated in the products, users can easily realize the seamless integration of Modbus Ethernet devices and Modbus serial devices and even multi master and slave hybrid networks. At the same time, the user can be set up by Web or Telnet. The simple design can not only realize the fast application, but also guarantee the application of the entire real industrial environment.The products using EMC protection design, can work in rugged environment.     Features 1.Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol2.Support 1 port 10/100M Ethernet3.Support 2 Port RS-2324.Support WEB and Telnet configuration5.Convert between Modbus TCP and Modbus RTU/ASCII6.Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes7.Support ID mapping function, to achieve the management of the host ID8.300bps~115200bps baud rate and nonblocking communication9.Support IP address and MAC address filtering function10.Slave mode support 16 TCP master connections11.Master mode support 32 slave TCP connection requests12.Support Response Timeout and Interval Timeout setting13.Support cross-gateway and cross-router communication14.IP30 protection grade, metal shell, wall mounted installation15.No fan, low consumption design16.Working temperature: -40~75℃     Ethernet portStandard: 10Base-T, 100Base-TXProtocol: Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, APR, ICMP, DNS and DHCPSignal: Rx+, Rx-, Tx+, Tx-Speed: 10/100MbpsWorking: Full-duplex and half duplexTransfer distance: 100mConnector: RJ45Serial portSerial port number: 2 ports RS-232RS-232 signal: TXD,RXD,RTS,CTS,GNDParity bit: None, Even, Odd, Space, MarkData bit; 7bit, 8bitStop bit: 1bit, 2bitBaud rate: 300bps~115200bpsRS-232 transfer distance: no more than 15mRS-232 connector: RJ45Master mode: 32 TCP slaves Slave mode: 16 TCP mastersWork mode: RTU Slave, RTU Master, ASCII Slave, and ASCII MasterLED IndicatorPower (PWR)Ethernet port connect status (Link)Serial port data indicator: TX1~TX2, RX1~RX2;Power requirementsInput voltage: 9~48VDCNo-load consumption: 0.79W@9VDCFull-load consumption: 0.86W@9VDCEnvironment limitsWorking temperature: -40~75℃Storage temperature: -40~85℃Relative humidity: 5%~95%(non-condensing)MechanicalShell: IP30 protection, metal shellInstallation: Wall mountingWeight: 230gSize (L×W×H): 100mm×69mm×22mmStandardEMI: EN 55022 Class A, FCC Part 15 Subpart B Class AEMS: EN 61000-4-2 (ESD), Level 3Shock: IEC 60068-2-27Free fall: IEC 60068-2-32Vibration: IEC 60068-2-6 WarrantyWarranty time: 3 yearsCertificatesCE, FCC, RoHS, UL508 (pending)Packing List1. GW1102-2D(RS-232)-P(9~48VDC) ×12. User manual ×13. Straight network cable ×14. Power adapter ×15. CD ×1 6. Warranty card ×17. Certificate of quality×1Optional accessories:  DIN-Rail Mounting Kit (35mm) ×1  

We are offering ethernet modbus gateway. The ethernet modbus gateway allows serial modbus rtus to communicate and interoperate with modbus/tcp based controllers. The modbus standard protocol is an asynchronous protocol designed to connect directly to computer asynchronous ports. Modbus has been extended to operate over ethernet using the ip protocol suite. This gateway converts between the modbus tcp/ip protocol and modbus ascii/rtu protocols transparently. the emg-01 can operate in four different modes viz, modbus rtu slave, modbus rtu master, modbus ascii slave or modbus ascii master. Depending up on the mode the modbus tcpip connection is emulated. the emg-01 is powered by powerfull 32bit controller and can support multiple socket connections. Emg-01 has built in web server which servers web pages to monitor the status of the device and also to set the various device configurations. multi mode operation configuration via browser protocol aware: minimum configuration needed two serial ports that each support rs-232, rs-485 2 or 4 wire 10 or 100 mbps ethernet rs-232 interface speeds to 230 kbps

GSM FCT (Fixed Cellular Terminal) is a compact fixed cellular terminal used to make and receive calls over GSM network while retaining the existing infrastructure. GSM FCT eliminates interconnection charges and provides substantial cost savings by turning all calls into mobile-to-mobile calls. It easily integrates with any PBX or telephone via GSM network. GSM FCT is ideal for small offices, remote project sites and retail shops for cost-effective and reliable communication. Features: Make and receive mobile calls from conventional analog phones Quad-band GSM and Tri-Band network operation Caller ID presentation on analog extension