HI-SPEED manufactures highly efficient scrubber working on principle of dynamic interaction between scrubbing liquid and pollutants in the moving stream of air/gas. The dirty air defense passing through the blower impeller, subjected to high pressure water jets, to have high intensity mixing. The moist air then passes through impeller blade and gets subjected to high intensity turbulence, resulting into complete scrubby of the gas. The moisture is removed from the outgoing gas by mist elimination.
Capacity : 100m3/hr up to 50,000 m3/hr
M.O.C. : MS/SS/PP/FRP
TYPE : spray towers and Venture or Dyno-centrifugal Scrubbers
HI-SPEED manufactures highly efficient scrubber working on principle of dynamic interaction between scrubbing liquid and pollutants in the moving stream of air/gas. The dirty air defense passing through the blower impeller, subjected to high pressure water jets, to have high intensity mixing. The moist air then passes through impeller blade and gets subjected to high intensity turbulence, resulting into complete scrubby of the gas. The moisture is removed from the outgoing gas by mist elimination.
Capacity : 100m3/hr up to 50,000 m3/hr
M.O.C. : MS/SS/PP/FRP
TYPE : spray towers and Venture or Dyno-centrifugal Scrubbers
Spray dryer takes liquid stream and separates the solute or suspension as solid and the solvent into vapor. The solid is usually collected in a drum or cyclone. The liquid input stream is sprayed through a nozzle into a hot vapor stream and vaporized. Solid particles are formed as moisture quickly leaves the droplets. A nozzle is usually used to make the droplets as small as possible, maximizing heat transfer and the rate of water vaporization. There are two main types of nozzles: high pressure single fluid nozzle (50 to 300 bars) and two-fluid nozzles: one fluid is the liquid to dry and the second is compressed gas (generally air at 1 to 7 bars).
Applications
Food : milk powder, coffee, tea, eggs, cereal, spices, flavorings, starch and starch derivatives. vitamins, enzymes, colorings.
Pharmaceutical : antibiotics, medical ingredients, additives.
Industrial : paint pigments, ceramic materials, catalyst supports, microalgae.
Spray dryer takes liquid stream and separates the solute or suspension as solid and the solvent into vapor. The solid is usually collected in a drum or cyclone. The liquid input stream is sprayed through a nozzle into a hot vapor stream and vaporized. Solid particles are formed as moisture quickly leaves the droplets. A nozzle is usually used to make the droplets as small as possible, maximizing heat transfer and the rate of water vaporization. There are two main types of nozzles: high pressure single fluid nozzle (50 to 300 bars) and two-fluid nozzles: one fluid is the liquid to dry and the second is compressed gas (generally air at 1 to 7 bars).
Applications
Food : milk powder, coffee, tea, eggs, cereal, spices, flavorings, starch and starch derivatives. vitamins, enzymes, colorings.
Pharmaceutical : antibiotics, medical ingredients, additives.
Industrial : paint pigments, ceramic materials, catalyst supports, microalgae.
Regenerative blower can handle air & other non-explosive gases and gas-air mixture and have, completely oil free & non pulsating flow. They are suitable for low volume flow and medium & high pressure applications. Its unique internal shape, size and design ensure high efficiency and trouble free operation. The body and impeller are made up of high grade aluminum alloy. They are supplied with inbuilt silencer on inlet and outlet port for silent operation. Inlet air fuller is also supplied with it.
Volume flow : Upto 2600 m3/hR
Pressure : Upto 4800 mm of W.G.
Vacuum : Upto 3800 mm of W.G.
Regenerative blower can handle air & other non-explosive gases and gas-air mixture and have, completely oil free & non pulsating flow. They are suitable for low volume flow and medium & high pressure applications. Its unique internal shape, size and design ensure high efficiency and trouble free operation. The body and impeller are made up of high grade aluminum alloy. They are supplied with inbuilt silencer on inlet and outlet port for silent operation. Inlet air fuller is also supplied with it.
Volume flow : Upto 2600 m3/hR
Pressure : Upto 4800 mm of W.G.
Vacuum : Upto 3800 mm of W.G.
As per the environment law, some of the industrial, commercial and hospitals wastes cannot be disposed directly into the surroundings. They are disposed either as land fill or are burned into incinerators to reduced health and environmental hazards.
The incinerators can be customized to suit the individual needs. Primary and secondary burners are fully automatics ones, working either on gas or oil. They are batch type or continuous type depending on the size and the volume. The heat recuperates are also offered in certain cases.
As per the environment law, some of the industrial, commercial and hospitals wastes cannot be disposed directly into the surroundings. They are disposed either as land fill or are burned into incinerators to reduced health and environmental hazards.
The incinerators can be customized to suit the individual needs. Primary and secondary burners are fully automatics ones, working either on gas or oil. They are batch type or continuous type depending on the size and the volume. The heat recuperates are also offered in certain cases.
These blowers are suited for handling hot gases in the furnaces & ovens. The blowers are for both horizontal and vertical mounting. The specially designed air cooled or/ and water cooled bearing hosing along with rotating cooling disk ensure smooth running and longer bearing life. The insulation box which supports the fan,is also supplied with the fan.
Capacity : 100 m3/hr to70,000 m3/hr
M.O.C. : 5 mm WG up to 500 mm WG
Pressure drop : up to 900o c
Efficiency : MS Aluminum & SS
These blowers are suited for handling hot gases in the furnaces & ovens. The blowers are for both horizontal and vertical mounting. The specially designed air cooled or/ and water cooled bearing hosing along with rotating cooling disk ensure smooth running and longer bearing life. The insulation box which supports the fan,is also supplied with the fan.
Capacity : 100 m3/hr to70,000 m3/hr
M.O.C. : 5 mm WG up to 500 mm WG
Pressure drop : up to 900o c
Efficiency : MS Aluminum & SS
A fluidized bed is formed when a quantity of a solid particulate substance (usually present in a holding vessel) is placed under appropriate conditions to cause the solid/fluid mixture to behave as a fluid. This is usually achieved by the introduction of pressurized fluid through the particulate medium. This results in the medium then having many properties and characteristics of normal fluids; such as the ability to free-flow under gravity, or to be pumped using fluid type technologies.
The resulting phenomenon is called fluidization. Fluidized beds are used for several purposes, such as fluidized bed reactors (types of chemical reactors), fluid catalytic cracking, fluidized bed combustion, heat or mass transfer or interface modification, such as applying a coating onto solid items.
A fluidized bed is formed when a quantity of a solid particulate substance (usually present in a holding vessel) is placed under appropriate conditions to cause the solid/fluid mixture to behave as a fluid. This is usually achieved by the introduction of pressurized fluid through the particulate medium. This results in the medium then having many properties and characteristics of normal fluids; such as the ability to free-flow under gravity, or to be pumped using fluid type technologies.
The resulting phenomenon is called fluidization. Fluidized beds are used for several purposes, such as fluidized bed reactors (types of chemical reactors), fluid catalytic cracking, fluidized bed combustion, heat or mass transfer or interface modification, such as applying a coating onto solid items.
They are quick, efficient, continuous and less labor intensive. They can be used for drying wet cake/granular having up to 80% moisture but material should have characteristic of free following after drying.
The material is fed in to mixture, which disintegrates it into smaller lumps, which are then fed into drying chamber by variable feeder, driven by geared motor, having specially designed stirrer. The Hot Air enters the drying chamber and under high turbulence condition, drying process starts. The dried material travels upward in drying chamber under influence of process blower and is separated in cyclone and bag-filter.
The material of construction is M.S., S.S, and Aluminum depending upon process requirements.
The process air is heated by any of the option:- steam, thermic fluid, hot air generator, working on either oil, or gas or solid fuels.
The drying capacity up to 800 kg/hr moisture removal rate is offered as standard equipments.
They are quick, efficient, continuous and less labor intensive. They can be used for drying wet cake/granular having up to 80% moisture but material should have characteristic of free following after drying.
The material is fed in to mixture, which disintegrates it into smaller lumps, which are then fed into drying chamber by variable feeder, driven by geared motor, having specially designed stirrer. The Hot Air enters the drying chamber and under high turbulence condition, drying process starts. The dried material travels upward in drying chamber under influence of process blower and is separated in cyclone and bag-filter.
The material of construction is M.S., S.S, and Aluminum depending upon process requirements.
The process air is heated by any of the option:- steam, thermic fluid, hot air generator, working on either oil, or gas or solid fuels.
The drying capacity up to 800 kg/hr moisture removal rate is offered as standard equipments.
Rising energy cost now requires most efficient evaporators to reduce process cost and process timing, while keeping product quality unaffected. Our evaporator design is either single effect or multiple effect, designed and manufactured to obtain higher thermal efficiency.
The heat sources are live steam, Thermic fluid or some available waste heat. Recently we have developed direct wood fired evaporator, which is lowest cost evaporator available in market.
We offer falling film, forced circulation and natural circulation evaporators. In some special application, mechanical vapor compressor evaporator are offered, which are very energy efficient.
Most of evaporators are designed for concentration of products, chemical recovery, waste concentration or for concentrating for final incineration Our falling film evaporator and horizontal spray film is out performing forced circulation heat exchanger design.
Rising energy cost now requires most efficient evaporators to reduce process cost and process timing, while keeping product quality unaffected. Our evaporator design is either single effect or multiple effect, designed and manufactured to obtain higher thermal efficiency.
The heat sources are live steam, Thermic fluid or some available waste heat. Recently we have developed direct wood fired evaporator, which is lowest cost evaporator available in market.
We offer falling film, forced circulation and natural circulation evaporators. In some special application, mechanical vapor compressor evaporator are offered, which are very energy efficient.
Most of evaporators are designed for concentration of products, chemical recovery, waste concentration or for concentrating for final incineration Our falling film evaporator and horizontal spray film is out performing forced circulation heat exchanger design.
These equipments are manufactured stricly as per coustomers processing requirement. Their design and internals are coustom designed to suit process requirement.
These equipments are manufactured stricly as per coustomers processing requirement. Their design and internals are coustom designed to suit process requirement.
We are leading manufacturer & exporter of Conveyor Dryer.
These equipments are manufactured stricly as per coustomers processing requirement. Their design and internals are coustom designed to suit process requirement.
We are leading manufacturer & exporter of Conveyor Dryer.
These equipments are manufactured stricly as per coustomers processing requirement. Their design and internals are coustom designed to suit process requirement.
HI-SPEED make CENTRIFUGAL BLOWERS which are known for their quality. They are best suited for handling hot air, cold air, dust laden air & fumes. They are manufactured using latest state of the art technology and are known for its rugged construction and high efficiency. The impellers are backward curved / forward curved / backward inclined / straight depending upon application.
Capacity : up to 250000 m3/ hr
Pressure : up to 800 mm of WG
M.O.C. : MS, MS/FRP, Aluminum & Stainless Steel
HI-SPEED make CENTRIFUGAL BLOWERS which are known for their quality. They are best suited for handling hot air, cold air, dust laden air & fumes. They are manufactured using latest state of the art technology and are known for its rugged construction and high efficiency. The impellers are backward curved / forward curved / backward inclined / straight depending upon application.
Capacity : up to 250000 m3/ hr
Pressure : up to 800 mm of WG
M.O.C. : MS, MS/FRP, Aluminum & Stainless Steel
We offer both fully automatic, reverse pulse jet type and mechanical shaker type bag filter for removal of fine,non sticky dust.The fully automatic reverse pulse jet bag filter have,specially designed bag of high efficiency filter media.
The reverse pulse jet bag filter are most suited for centinux operations. The elecronic centraled pulse generator, coupled with compresed air opereted pulse valve generates high magnitude pressure wave to clean bags at predelermined inlaval.
The filter bags are made up of high filteration effecency, pp or similar, nonwoven material,and due to plated design, does not require bag supporting cages.
Capacity : 500 m3/hr –to-2,00,000 m3/hr
M.O.C. : MS, SS, MS with FRP lining
PRESSURE : Offered for both negative Positive
Pressure drop : In range of 100 mm of WG
Efficiency : 98% down to 5 micro.
We offer both fully automatic, reverse pulse jet type and mechanical shaker type bag filter for removal of fine,non sticky dust.The fully automatic reverse pulse jet bag filter have,specially designed bag of high efficiency filter media.
The reverse pulse jet bag filter are most suited for centinux operations. The elecronic centraled pulse generator, coupled with compresed air opereted pulse valve generates high magnitude pressure wave to clean bags at predelermined inlaval.
The filter bags are made up of high filteration effecency, pp or similar, nonwoven material,and due to plated design, does not require bag supporting cages.
Capacity : 500 m3/hr –to-2,00,000 m3/hr
M.O.C. : MS, SS, MS with FRP lining
PRESSURE : Offered for both negative Positive
Pressure drop : In range of 100 mm of WG
Efficiency : 98% down to 5 micro.
HI-SPEED axial flow fan meets the requirement of general ventilation, air cooling & conditioning field and of various other industrial applications. It has application where larger air or gas volume flows at low pressure and, also when space is the limitation. The blades are casted, forged or fabricated. Individual blades can be rotated on its axis to change performance for vanaxial model.
Casting : tube axial type or with frames for wall mounting.
Capacity : 100 m3/hr – to- 2, 00,000 m3/hr.
Pressure : 5 mm WG –to- 200 mm WG.
M.O.C. : MS, MS/FRP, &Aluminum & stainless steel.
HI-SPEED axial flow fan meets the requirement of general ventilation, air cooling & conditioning field and of various other industrial applications. It has application where larger air or gas volume flows at low pressure and, also when space is the limitation. The blades are casted, forged or fabricated. Individual blades can be rotated on its axis to change performance for vanaxial model.
Casting : tube axial type or with frames for wall mounting.
Capacity : 100 m3/hr – to- 2, 00,000 m3/hr.
Pressure : 5 mm WG –to- 200 mm WG.
M.O.C. : MS, MS/FRP, &Aluminum & stainless steel.
Reviews & Ratings
Write a Review
Post Free Ad