Labdhi Petrochem Ankleshwar Gidc, Gujarat

C-12 LP-200 Aromatic Solvent is a mixture of C12-C14 having high molecule weight hydrocarbons and high solvency. It is available in environment friendly composition having low air pollutants and less hazardous nature. This is provided with high boiling point and slow evaporation rate owing to high flash point exceeding class C. This C-12 LP-200 Aromatic Solvent is widely used in different sectors such as High build coating, Agrochemical,  Specialty oil, Chemical, Emulsifier, Surfactant, Additives, Oil Field Chemicals etc.

Country of Origin : India

Brand Name : LP AROSOL 200(C-12)

C-10 LP-150 Aromatic Solvent is a colorless, clear liquid member of the petroleum hydrocarbon family. It is available with a mild aromatic odour having high boiling point (181-205 C). It is widely used in printing inks, agro, paints and coatings and other industries. This product comes with high flash point and evaporation rate to ensure better flow and film formation. This C-10 LP-150 Aromatic Solvent is available with no ethyl-benzene content, hence it ensures to create environmentally-friendly chemicals and pesticide formulations for agro sectors.\\nIt is kept in mild steel drums and ISO certified tanks. In addition, this is transported by tank truck or bulk vessels in cool, dry and properly ventilated area. This C-10 LP-150 Aromatic Solvent comes with the specific gravity of 0.880 and a flash point of 65 (CC).

Country of Origin : India,India

Number Of Flower : Petroleum

Packaging Type : Drum & Tanker Load

Brand Name : LP AROSOL 150(C-10)

C-9 LP-100 Aromatic Solvent is a high-grade 100% aromatic product. This is widely used in paint, high build coating, PVC & screen printing inks, agrochemical, pesticides and other industries. This clear colorless liquid is available with hydrocarbon high solvency. This environmental friendly C-9 LP-100 Aromatic Solvent comes with high flash point and minimum hazardous air pollutant. It is available in loose form in Tanker load & Drum packing.

Country of Origin : India,India

Number Of Flower : Petroleum

Packaging Size : TANKER

Packaging Type : Drum & Tanker IBC tank

Brand Name : LP AROSOL 100(C-9)

Solvent 200ND (Solvent C12 ND) is an severely refined mono aromatic solvent, LowNaphthalene content helps the manufacturers to meets  \\nthe Europeanlabelling requirements, is mixture of C12-C14 possess higher molecule weighthydrocarbons with high solvency. Low Air\\npollutants And Environmental hazardous. It hashigh boiling point and slow evaporation rate, due to high flash point exceedingClass C It finds application in High build coating,  Printing inks, Agrochemicals ,Oil Filed chemical, Specialty Chemical like Water Processing\\nChemical, Emulsifier And Surfactant, Additives etc.

Country of Origin : India

Usage/Application : PESTICIDES FORMULATION, INK & ADHESIVE, PAINT, RESINS, COATINGS , WATERPROOFING,

Brand Name : LP AROSOL 200 ND (C-12 ND)

This is a C-9,C10 hydrocarbon’s high solvency. It has high flash point, low hazardous air pollutant & environmental friendly solvent. High boiling point. Low naphthalene content help’s the manufacturers to meets the European leading requirements. It finds application in Paints, high build coating, Pvc & screen printing inks, agrochemical’s ,oil filed chemical’s, speciality chemical’s like water processing chemical’s etc.

Country of Origin : India,India

Brand Name : LP-150 ND

Application : INDUSTRIAL

Country of Origin : India

We are among the reputed organizations, deeply engaged in offering an optimum quality range of MTO Chemical.

Flash Point : 50

Country of Origin : India

Other Names : Gum Turpentine

Packaging Type : DRUMS & TANKER LOAD

Density : 0.780

Purity : 98%, 99.99%, 100%

Grade : INDUSTRIAL

Application : Paint, Varnish

Form : LIQUID

Brand Name : LP-MINERAL OIL

Aromatic solvent 200 is mixture of C12-C14 possess higher molecule weight hydrocarbons with high solvency. Low Air pollutants & Environmental hazardous. It has high boiling point and slow evaporation rate, due to high flash point exceeding Class “C”. It finds application in high build coating, Pvc & screen printing inks, agrochemical’s ,oil filed chemical’s, speciality chemical’s like water processing chemical’s, emulsifier’s & surfactant’s, Additives etc.

Brand Name : LP-200

Certification : ISO 9001

Country of Origin : India

This is a C10 hydrocarbon’s high solvency. It has high flash point, low hazardous air pollutant & envormental       friendly solvent. High boiling point. It finds application in Paints, high build coating, Pvc & screen printing inks,  agrochemical’s ,oil filed chemical’s, speciality chemical’s like water processing chemicals   A high flosh point solvent that is not classified dangerous goods for transport or storage. A high solvency product that is effective on complex resin systems and agricultural actives. Solvent power and evaporation rate. Powerful solvency plus slow evaporation - Not flammable Uses include industrial coatings, inks, pesticides, metal and equipment cleaning  

Brand Name : LP150

Certification : ISO 9001

Number Of Flower : LIQUIED

Country of Origin : India

This is a C-9 hydrocarbon’s high solvency. It has high flash point, low hazardous air pollutant & envormental friendly solvent. It finds application in Paints, high build coating, PVC & screen printing inks, agrochemical’s etc.

Brand Name : LP110

Number Of Flower : LIQUIED

Country of Origin : India,INDIA

This is a blended product of  Aromatic stream of similar boiling range for Aromatic solvents are primarily used as solvents and diluents in various industrial fields. Aromatic solvents such as toluene are commonly used in paints, varnishes, adhesives and as chemical intermediates.

Packaging Type : Loose In Tanker Load

Usage/Application : Industrial

Country of Origin : India

Number Of Flower : LIQUIED

Brand Name : MIX HYDROCARBON SOLVENT

This is a blended product of  Aromatic stream of similar boiling range for Aromatic solvents are primarily used as solvents and diluents in various industrial fields. Aromatic solvents such as toluene are commonly used in paints, varnishes, adhesives and as chemical intermediates.

Brand Name : LP-AROMAX 80

Country of Origin : India

This is a blended product of  Aromatic stream of similar boiling range for Aromatic solvents are primarily used as solvents and diluents in various industrial fields. Aromatic solvents such as toluene are commonly used in paints, varnishes, adhesives and as chemical intermediates.

Brand Name : MIX HYDROCARBON SOLVENT

Grade Standard : Industrial

Country of Origin : India

This is a blended product of  Aromatic stream of similar boiling range for Aromatic solvents are primarily used as solvents and diluents in various industrial fields. Aromatic solvents such as toluene are commonly used in paints, varnishes, adhesives and as chemical intermediates.

Usage/Application : Solvents And Diluents In Industrial Fields

Material : Blended Aromatic Compounds

Purity : 99%

This  is  a  C11+ hydrocarbon’s  high solvency. It has high flash point, low hazardous air pollutant & envormentalfriendly solvent. High boiling point. It finds application in Paints, high build coating, PVC & screen printing  inks, agrochemical’s, oil filed chemical’s,  speciality chemical’s  like water processing chemical’s etc.  

Brand Name : LP180

Certification : ISO 9001

Number Of Flower : LIQUIED

Country of Origin : India

A dark viscous residual fuel obtained by blending mainly heavier components from crude distillation unit, short residue and clarified oil from fluidized catalytic cracker unit. Nomenclature: Bunker fuel, furnace oil, Fuel oil are other names for the same product. Though Fuel oil is a general term applied to any oil used for generation of power or heat, Fuel oil can included distillates and blends of distillates and residue such as Light Diesel Oil. Specification: Furnace oil in the current marketing range meets Bureau of Indian Standards Specification IS : 1593 - 1982 for fuel oils, grade Viscosity: Viscosity is the most important characteristic in the furnace oil specification. It influences the degree of pre-heat required for handling, storage and satisfactory atomization. If the oil is too viscous it may become difficult to pump, burner may be hard to light and operation may be erratic. Poor atomization may result in the carbon deposits on the burner tips or on the walls. The upper viscosity limit for furnace oil is such that it can be handled without heating in the storage tank is excepting under server cold conditions. Pre-heating is necessary for proper atomization. Flash Point: As per the Controller of Explosives classification, Furnace oil falls in the class "C" category with minimum flash point standard of 66 deg. C. Since Penskey Martens Closed Cup method is used, it is apparent that a small quantity of low boiling point hydrocarbons is sufficient to lower the flash point drastically. Pour Point: It is a very rough indication of the lowest temperature at which Furnace Oil is readily pump able. In the specification the pour point of Furnace oil is not stipulated. However, for Furnace oil manufactured indigenous and for imported parcels, the pour point is such that current supplies normally can be handled without heating the fuel oil handling installation.

Country of Origin : India

Number Of Flower : FURNACEOIL

Storage Condition : Liquid

Application : Fuel Oil, Furnace

Pressure : ABOVE 90 FLASH

Form : Liquid

Purity : 99%

A dark viscous residual fuel obtained by blending mainly heavier components from crude distillation unit, short residue and clarified oil from fluidized catalytic cracker unit. Nomenclature: Bunker fuel, furnace oil, Fuel oil are other names for the same product. Though Fuel oil is a general term applied to any oil used for generation of power or heat, Fuel oil can included distillates and blends of distillates and residue such as Light Diesel Oil. Specification: Furnace oil in the current marketing range meets Bureau of Indian Standards Specification IS : 1593 - 1982 for fuel oils, grade Viscosity: Viscosity is the most important characteristic in the furnace oil specification. It influences the degree of pre-heat required for handling, storage and satisfactory atomization. If the oil is too viscous it may become difficult to pump, burner may be hard to light and operation may be erratic. Poor atomization may result in the carbon deposits on the burner tips or on the walls. The upper viscosity limit for furnace oil is such that it can be handled without heating in the storage tank is excepting under server cold conditions. Pre-heating is necessary for proper atomization. Flash Point: As per the Controller of Explosives classification, Furnace oil falls in the class "C" category with minimum flash point standard of 66 deg. C. Since Penskey Martens Closed Cup method is used, it is apparent that a small quantity of low boiling point hydrocarbons is sufficient to lower the flash point drastically. Pour Point: It is a very rough indication of the lowest temperature at which Furnace Oil is readily pump able. In the specification the pour point of Furnace oil is not stipulated. However, for Furnace oil manufactured indigenous and for imported parcels, the pour point is such that current supplies normally can be handled without heating the fuel oil handling installation.

Country of Origin : India

Number Of Flower : FURNACEOIL

Storage Condition : Liquid, Crude

Application : Fuel Oil, Furnace

Viscosity : 180 sec at 50 Deg C

A dark viscous residual fuel obtained by blending mainly heavier components from crude distillation unit, short residue and clarified oil from fluidized catalytic cracker unit. Nomenclature: Bunker fuel, furnace oil, Fuel oil are other names for the same product. Though Fuel oil is a general term applied to any oil used for generation of power or heat, Fuel oil can included distillates and blends of distillates and residue such as Light Diesel Oil. Specification: Furnace oil in the current marketing range meets Bureau of Indian Standards Specification IS : 1593 - 1982 for fuel oils, grade MV2. Viscosity: Viscosity is the most important characteristic in the furnace oil specification. It influences the degree of pre-heat required for handling, storage and satisfactory atomization. If the oil is too viscous it may become difficult to pump, burner may be hard to light and operation may be erratic. Poor atomization may result in the carbon deposits on the burner tips or on the walls. The upper viscosity limit for furnace oil is such that it can be handled without heating in the storage tank is excepting under server cold conditions. Pre-heating is necessary for proper atomization. Flash Point: As per the Controller of Explosives classification, Furnace oil falls in the class "C" category with minimum flash point standard of 66 deg. C. Since Penskey Martens Closed Cup method is used, it is apparent that a small quantity of low boiling point hydrocarbons is sufficient to lower the flash point drastically. 

Storage Condition : Liquid

Application : Fuel Oil

Aromatic solvent 200 is mixture of C12-C14 possess higher molecule weight hydrocarbons with high solvency. Low Air pollutants & Environmental frindly low hazardous. It has high boiling point and slow evaporation rate, due to high flash point exceeding Class “C”. It finds application in high build coating, Pvc & screen printing inks, agrochemical’s ,oil filed chemical’s, specialty chemical’s like cleaning chemical’s, emulsifier’s & surfactant’s, Additives etc.

Country of Origin : India

Number Of Flower : LIQUIED

Grade Standard : Chemical Grade

Usage/Application : INDUSTRIAL

Speciality : Exact Composition, Effective

This is a C11+ hydrocarbon’s high solvency. It has high flash point, low hazardous air pollutant & environmental friendly solvent. High boiling point. It finds application in Paints, high build coating, PVC & screen printing inks, agrochemical’s, oil filed chemical’s, specialty chemical’s, cleaning chemicals etc.

Country of Origin : India

Number Of Flower : LIQUID

Packaging Type : Drum

Grade Standard : Chemical Grade

Usage/Application : Aromatic Use, Industrial

With sincerity and hard work of our professionals, we have carved a niche for ourselves in this domain by providing a premium quality gamut of C10 Aromatic Solvent. This is a C10 hydrocarbon’s high solvency. It has high flash point, low hazardous air pollutant & environmental friendly solvent. High boiling point. It finds application in Paints, high build coating, Pvc & screen printing inks, agrochemical’s ,oil filed chemical’s, specialty chemical’s like cleaning chemical’s etc.

Other Names : C-10 SOLVENT

Number Of Flower : Aromatic Chemicals, LIQUIED

Purity : 99%

Application : Aromatic Use, Industrial

Form : Liquid

Storage : Cool & Dry Place

Fuel oil (also known as heavy oil, marine fuel or furnace oil) is a fraction obtained from petroleum distillation, either as a distillate or a residue. In general terms, fuel oil is any liquid fuel that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 42 °C (108 °F) and oils burned in cotton or wool-wick burners. Fuel oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, i.e., heavier than gasoline and naphtha.

Country of Origin : India

Number Of Flower : Light Diesel Oil

Packaging Type : Plastic Drum, Barrel

Feature : High Reliability

Storage Condition : Liquid

Application : IN BOILER BHATTI AS A BURNIG APPLICATION

Form : Liquid