Mandrels Dealers in Aurangabad (18 products available)

• Diameter: 12 MM TO 100MM
• Thickness: 50MM
• Length: 250mm. 300mm
• Application: Industrial
• Tensile Strngth: 150 MPa
• Hardness: 60-62 HRC

• Length: 1-2 Feet
• Feature: Straight Spline , Straight Serration
• Diameter (mm): 4-8 Inch
• Hardness (HRC): 28 Hrc
• Condiiton: New
• High Speed Steel: M-2, M-35, M-42, ASP 2030, ASP 2052

• Features: Ruggedly constructed, Best quality, Excellent finish

Q-Tech Precision Clamping Hydraulic mandrels function by expanding or compressing under hydraulic pressure.The hydraulic system is integral and may be manually or power actuated.Extreme accuracy in componenet location is assured as the sleeves expand or contract under equalized hydraulic pressure uniformly from their geometric axis within 0.003mm or less if required specially.These mandrels may be manual or auto actuated depending on the requirement of customer. In auto actuated mandrels centering is performed via. the tailstock center by simultaneous axial pressure against the contact face of mandrel and work piece.

The continuing advancement in production methods in the Metalworking Industry has dcreated a need for precision workholding devices capable of automatic clamping in component bores. In addition, the equipment must transmit the high accuracy of the latest machine tools and develop sufficient holding power to resist the cutting forces imposed on the workpiece.

The offered mandrel is broadly utilized as a part of various businesses for holding work piece that will be machined.This mandrel is impeccably produced under the strict bearing of experienced architects utilizing ideal review parts with the assistance of the most recent innovation. Its features are ; 1.High strength 2.Durability 3.Perfect finish

We are offering hydraulic expanding gear shaving mandrels (auto actuated). Between centre auto actuated shaving mandrel between centre hydraulic gear shaving mandrels can be manual or auto actuation type. In this type work piece loading is done outside the machine. The work piece is loaded on one half, and then the second half is engaged. in case of manual actuation gear clamping is done manually on one half outside the machine. In auto actuation type after engaging component on one half and the second half of the mandrel, the complete assembly is placed between centres on machine and centring and clamping is performed simultaneously via. Axial pressure of tailstock against gear face. the run out accuracy is below 0.005 mm. machine mounted auto actuated shaving mandrel in this type both halves of mandrel are mounted on opposite work piece spindles. These are suitable particularly for auto robotic loading. the clamping and centring of mandrel is performed same as in case of auto actuated between centre type. the run out accuracy is 0.003mm.

Spline Taper Mandrels, spline broach, Keyway Broaches, serration broach

spline mandrels, Spline Ring Gauges, Spline Couplings

Involute spline mandril

Shaving Mandrels, Carbide Dead Centre, Electric Tools, Special Center

Expanding Mandrel & Sleeves, TG Collets, shell mill holders

spline mandrel, Broaching Tools, Spline Gauges, serration broaches

Taper Test Mandrel, Cnc Power Chucks, Parallel Block, Sine Center

Expanding Mandrel & Sleeves, shell mill holders

spline mandrels, Spline Ring Gauge, spline plug gauge, Shaper Cutter, Broach