Electronic Module Dealers in Bangalore (28 products available)

• Connector: DB9

Our range of converters include: rs232 to rs485rs422, usb to rs232 & usb to rs485, usb drive module, wigand to rs232 serial etc. Usb 232 m is a product that connects to a pc�s usb port providing a high-speed asynchronous, for the rs 232 serial port to communicate with rs 232 devices. The usb 232 m is provided with txdrxd leds to indicate communication status and supports a maximum speed of 500kbps. Rs 232 serial port is furnished with a 9 pin d-type male connector, which is similar to that found behind a pc. When the device is connected to pc�s usb port, the usb 232 m is automatically detected and is installed as a native com port, and is compatible with existing serial communication applications. Users can addremove this device once plugged into the usb port of the pc, since this appears as a com port the serial interface consists of two data signals � txd (transmit) and rxd (receive) as well as six control signals � rts, cts, dsr, dtr, dcd and ri. The serial interface supports rtscts, dsrdtr and x-onx-off handshaking the product is programmable to support a variety of data formats and baud rates

• Type: Peltier
• Voltage (V): 12
• Dimensions (L x W x H (Inches): 1.5748 x 1.5748 x 0.149606
• Working Temperature Range: 66
• Power (W): 50

• Type: 620-25/35 Processor Module
• Application: PLC MODULE
• Warranty: 1Year
• Brand Name: Honeywell
• Model No: 620-0080
• Usage: Industrial
• series: IPC 620-25 SERIES
• Specification: IPC 620-25 SERIES

Model No : 620-0080   Product Type : 620-25/35 Processor Module PLC MODULE PROCESSOR   Processor Module - IPC 620-25 and 620-35   The processor provides computing power to the PLC, and computes memory checksum and other diagnostic functions to verify system integrity.    Manufacture : Honeywell     Usage : Indutrial Automation     Warranty : 1 Year  

• Model: UITM 01 [Full bridge configuration]
• Beam Material: Stainless Steel
• Capacity: 1 Kg
• Beam Dimension: 300(L) X 28(B) X2.5(T) in mm.
• Strain Gauge: Foil type Resistance, 350SL, Q.L:3mm
• Beam Mounting: Beam mounted on a rigid metal. From with connection brought out to a Connector. : 3½ digit to
• Indicator: 3½ digit to read upto ±1999 counts
• Bridge Balancing: Potentiometer
• Bridge Excitation: 10 V. DC
• Power Supply: 230V ± 10%@50Hz
• Accessories: Pan to load the Beam. 100g X 10N dead weights, Necessary cables provided.

• Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
• Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
• Onboard Relay: 5V,10A/250V AC 10A/30V DC relay
• Transmission Distance: 400m (max)
• Baud Rate: 9600.
• Features: Diode effusion protection,Short response time

Multifunctional Smart Device Terminal offers secure authentication with Remote and the Mobile Phone via BLE (Bluetooth low energy). This makes the vehicle safer and more comfortable with: Auto-Immobilization, Vehicle On-board Dagnostics (OBD).

The ESP8266 WiFi Module is a SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. This module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware. You can simpy connect this with your microcontroller and connect to Wi-Fi right out of the box. Connecting with Arduino is much simpler and works similar to a Wi-Fi shield except that this is in a much smaller package. The module is an extremely cost effective board with a huge supporting community.ESP8266 WiFi Module also has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. The high degree of on-chip integration allows for minimal external circuitry. The module supports APSD for VoIP applications and Bluetooth co-existance interfaces and contains a self-calibrated RF allowing it to work under all operating conditions without any external RF parts.There is a lot of information on ESP8266 over the web provided by amazing community support. If you are thinking of IOT, think ESP8266 modules.Note: The ESP8266 Module is not capable of 5-3V logic shifting and will require an external Logic Level Converter. Please do not power it directly from your 5V dev board. FEATURES 802.11 b/g/n Wi-Fi Direct (P2P), Soft-AP Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLLs, regulators, DCXO and power management units Power down leakage current of

The Rear-transition Module – Breakout Card (RTM-BOC) from Mistral is an eight layer plug-in module for the Keystone II family of Edison,Hawking and Kepler EVMs showcasing the multi-core DSP+ARM KeyStone II System-on-Chips from Texas Instruments. These EVMs are double wide AMC form factor cards which provide Hyperlink, AIF2, and XFI interfaces over the AMC.4 µTCA interfaces.

• Transducer Function: Thermoelectric Cooler
• Power Rating: 37W 
• Current Max @ Diff Temperature Max: 2.4A
• Voltage Max @ Diff Temperature Max: 30V 
• Brand Name: MULTICOMP PRO
• Part Number: MP-AR-AR-040-24

• Sensitivity: -98.4dBm
• Model Name/Number: ESP32
• Power - Output: 20.5dBm
• RF Family/Standard: Bluetooth, WiFi
• Data Rate: 150Mbps
• Protocol: 802.11b/g/n, Bluetooth v4.2 +EDR, Class 1, 2 and 3
• Frequency: 2.5GHz
• Modulation: CCK, DSSS, OFDM

• Features: Defect free, Perfect shape, Compact size

hepa filter terminal modules, filtration product, Hvac Air Filter

Zentri Bluetooth Module, 312A XXNAA R Power Connector

blue tooth gps module, Semiconductors, planar transformer, Power inductor

We are a reputed Manufacturer, Exporter & Supplier of Bluetooth Module. The Bluetooth Module we offer is an easy to use Bluetooth SPP (Serial Port Protocol) Module, designed for transparent wireless serial connection setup. Serial port Bluetooth Module is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. The Bluetooth Module uses CSR Bluecore04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency Hopping Feature). The Bluetooth Module has the footprint as small as 12.7mmx27mm and will simplify the overall design/development cycle. Features : Bluetooth spec. V2.0 Full speed bluetooth operation with full piconet support and scatternet support Uart interface and with baudrate setup function Support for 8 mbit external flash onboard Support for 802.11 co-existence Working Principle : Embedded Bluetooth serial communication Module (can be short for module) has two work modes: order-response work mode and automatic connection work mode. And there are three work roles (Master, Slave and Loopback) at the automatic connection work mode. When the module is at the automatic connection work mode, it will follow the default way set lastly to transmit the data automatically. When the module is at the order-response work mode, user can send the AT command to the module to set the control parameters and sent control order. The work mode of module can be switched by controlling the module PIN input level. Advantages : It can easily transfer the UART data through the wireless medium It comes with integrated antenna It operates at low power Applications : Computer and peripheral devices GPS receiver Industrial control Microcontroller unit projects Mouse, keyboard, joystick

Bluetooth Modules, GPS Modules, Microcontrollers

electronic module

We are one of the best leading supplier of Electronic Modules

electronics lab training modules, Laboratory Instruments, Testing Instruments