Electronic Module Dealers in Pune (13 products available)

Categories : Electronic Gauge Interface, ELECTRONIC GAUGES

FEATURES: Eight measuring channels having pre-determined full-scale DC output voltage, based on a pre-determined measuring range Interfaced to eight Baker Inductive probes Recessed ‘Zero’ control per channel: Travel 50 to 60 µm Recessed calibration control per channel Max. permissible error (MPE) per channel is less than or equal to ±1 % of the full scale measuring range Reference temperature of calibration is 20 ºC Output drift over operating temperature range : < 0.5 % / ºC Drift of sensitivity over operating temperature range : < 0.5 % / ºC Output instability: < 200 mv Display stability time: < 500 ms Power consumed by module 20 VA (max) Voltage supply to the read-out module: 230 V AC ±10 %, 50 Hz Operating temperature range 0 ºC to 45 ºC. Humidity should not exceed 60 % Rh (non-condensing) All measuring channels are compatible only to the Baker Axial probes Also available in 4 & 2 Channel (Probe inputs)

Box dimensions : (2.60 x 2.65)"

ESP8266-EVB-BAT is an evaluation board for the highly-integrated WIFI SoC ESP8266EX. The board comes with a custom-cut box HAMMOND box. The board can be powered by Li-Po battery and comes with a battery charger. It is recommended for beginners with ESP8266. ESP8266EX is very highly integrated SoC which includes Tensilica's L106 32-bit core processor; SRAM; power management unit; RF front end. ESP8266EX has a number of interfaces - I2C, SPI, SDIO and also a number of free GPIO pins. The chip allows the implementation of a WIFI TCP-IP stack with just few extra components beside the ESP8266EX. It's a very popular IC that attracted a lot of attention upon its launch. A board suitable for resarch and development of espressif's ESP8266EX chip. The module be used for home automation, smart plugs and lights, mesh networks, industrial wireless control, baby monitors, IP cameras, sensor networks, wearable electronics, etc. FEATURES: Board features: Includes ESP8266-EVB-BAT Protective HAMMOND box 1593KBK All connectors accessible when the box is closed   ESP8266-EVB-BAT features:  Relay 220VAC/10A with two-part Wago connector and status LED Big button for easier access to UART mode LiPo battery connector with built-in LiPo charger and status LEDs Step up converter Power jack for +5V external power supply UEXT connector 20-pin connector CON1 with ESP8266's signals PCB dimensions: (2.0 x 2.2)" ~ (51 x 57)mm

Application : Engine coolant flow control Range : 2Wh 3Wh, PV, SCV, LCV & HCV Type : Internal mounting in engine External mountinApplication : Engine coolant flow control Range : 2Wh 3Wh, PV, SCV, LCV & HCV Type : Internal mounting in engine External mountin

Model Name/Number : Hlk-RM04

Input Supply Voltage : 5 VDC

Communication Speed : 230400 baud maximum

Connection Speed : Up to 230.4 KBPS

Dimensions : 80x50x18 mm

DHCP : Yes

Certification : CE, ROHS

Application : Industrial

Model Name/Number : AT-09

Height : 8mm

Width : 17mm

Input Supply voltage (V) : 3.6

Operating Temperature : -20

Input Current (uA) : 90 to 400uA

Weight : 0.01 kg

Frequency : 2.4 GHz ISM band

Model No : HC-05

Power supply : +3.3 V DC 50 mA

Dimension : 26.9 mm x 13 mm x 2.2 mm

Working temperature : -20

Visonic Advanced IP Communicator Internet-based Home Control Solution for PowerMaxPro, PowerMaxComplete and PowerMaxExpress. Fits inside the control panel. Email notifications in case of alerts and alarms. When used with a WiFi camera, it sends the still images as well.   Visonic IP Communicator Module PowerLink 2 KIT Advanced IP Communicator Internet-based Home Control Solution for PowerMaxPro, PowerMaxComplete and PowerMaxExpress. Image Alarm Verification the Right Way. As PowerLink2 is fully integrated with the PowerMax® home security system, it has the ability to send alarm time images based on real motion detection, which significantly reduces the cost to service providers and hassle to homeowners of false alarms Provides IP-based event notifications to alarm central stations via Visonic’s IPMP (IP Management Platform). No router configuration required when used for IP-based event notification purposes. Built-in secure end-user web portal accessible from all standard PC and mobile phone browsers. Built-in mobile interface designed for touch screen mobile devices. Full control over the PowerMax home security system, including arm/disarm and status view of the system devices, and control of X-10 compliant home appliances. Provides live and alarm time recorded video feeds from up to 12 cameras, with the ability to save an image for evidence. Does not require any client software installation. Does not require a fixed IP at the home premises. End user event reporting via on-screen alerts, e-mail and mobile messages. Enables end users to access the PowerMax event log. Offered as an internal module for PowerMaxPro, PowerMaxExpress and PowerMaxComplete. Fully managed by Visonic’s IPMP management platform. Remote maintenance and configuration of the PowerMax security system via the IPMP.

BioEnable offer research & development services in the field of Bluetooth Low Energy BLE 4.0 . BioEnable provides Bluetooth low energy solutions and services for Bluetooth Smart sensor applications and Bluetooth Smart Ready handheld devices. Atheros Bluetooth Low Energy Broadcom Bluetooth Low Energy CSR Bluetooth Low Energy Infineon Technologies Bluetooth Low Energy Marvell Semiconductor Bluetooth Low Energy Nordic Semiconductor Bluetooth Low Energy Qualcomm Bluetooth Low Energy ST-Ericsson Bluetooth Low Energy Texas Instruments (TI) Bluetooth Low Energy

HC 05 Bluetooth Module, Led, Wireless Transceiver Module

Bluetooth Module, Cable Float Switch, power transistor

electronic modules, Electric Motors, Bevel Gearbox, Bevel Helical Gearboxes

Low-Cost Embedded UART-ETH-WIFI Module, Smart Card