Overhead Cranes Dealers in Bangalore

EOT crane is very convenient equipment for material handling even in the small production units and warehouses. The reduced wheel loads combined with very low headroom standard hoists provide outstanding value. These EOT crane can fitted in different floor areas by using various fixing arrangements and modifications in design. The accurate dimensions result in optimal hook position providing exceptional travel characteristic. EOT crane provides a typical advantages of utilizing the space at its best even in the buildings with unfavourable dimension. We can design and efficiently install EOT crane in available space by using different fixing arrangements. Standard Features: Design: EOT cranes are used when heavy loads and wide spans are required. EOT cranes consist of two torsion-free box girders. This makes EOT cranes especially suitable for lifting and transporting loads over 10 T and for span of more than 25 m. Motors: The motors are used specially crane duty suitable for frequent starting, reversing & braking in accordance with IS-325. Electrical Panel: Modular design, ease to install and maintain, reliable operation, fuse less circuitry, ducted wiring and compact terminals. Motor overload protection to prevent overloading.

We manufacture single girder EOT crane that is compact in dimensions, low in weight and easy to operate and maintain. Available in various dimensions these cranes are perfect for load carrying. These cranes usually find application where the load is to be transferred from one bay to another as heavy load movement is not possible with conventional cranes. These cranes also have rope drum to withstand the alignment. Single Girders are economical, safe and efficient, simple rugged, versatile, without too much sophistication to cut sown your cost based on renowned designs and service of ANKIT. These cranes have a lower wheel load which reduces the column cost. Its lower headroom also cuts down the building height and cost. It does not require any additional operator to operate the crane. It also has lighter structural weight.Safety Measures: Push button controller voltage restricted to a low, danger free 24V Dependable electromagnetic brake inbuilt for hoisting lowering motion Limit switch prevents over hoisting of snatch block/load avoiding accidents Operated through a reliable circuit incorporating contractor Back up fuses Isolating switch Indicating lamp

We offer a range of Monorail Cranes, which can be used for lifting and placing any type of materials. These cranes have a fixed I Section beam along which the hoist mobilizes. We manufacture these cranes using advanced production techniques and thus, the systems are known for their high efficiency, design flexibility and space saving features. These cranes are preferred in lifting and material handling applications which have only cross travel movements and no long travel movements.

Our Double Girder EOT Cranes are 100% compliant with the IS 807-1976, IS 3177-1977 or IS 4137-1985 standard. These EOT Cranes are characterized by ruggedness, durability, and affordability. They are designed and developed using well researched and out-of-the-box ideas. They are made from high-grade materials and components and are set as per the client’s requirement. We are one of the top-notch Manufacturers, Exporters, and Suppliers of Double Girder EOT Cranes from Bangalore, India. Details : These girders are of box-type construction with butt-weld joints in tension zone radio graphed. These cranes also have totally enclosed oil splash lubricated gear box with precision machine-cut gears pinions. The wheels of this crane are made of Forged steel. The wheel assemblies are provided on 'L' type bearing housing with anti-friction spherical roller bearings. It also has flexible cables suspended from cable trolleys feed power supply to crab.

Capacity Ranging from 500 Kgs – 25,000 Kgs Century Fab-Tech Single Girder Cranes are designed to provide an excellent value for money with no compromise on performance. These Cranes meet a wide range of modern industrial demands. These single Girder cranes has reduced wheel loads, saving costs on new support structures and increased lifting capacities on existing structures.

Owing to our technically advanced infrastructural facilities, we are able to manufacture and supply an extensive array ofDouble Girder EOT Cranes. The entire range of products is engineered with precision using quality approved raw materials, keeping in mind global quality standards. This range offered by us is used efficiently in several industries for different applications. Our Double Girder EOT Cranes is appreciated by our clients for their remarkable features such as application specific design, load bearing capacity and high performance.   FEATURE: Affordable price High performance High quality

Armsel makes special purpose Under slung cranes (single & Double girder types) of Lifting capacity ranging from 2 Ton to 25 Tons.   Under slung cranes are used where the head room is limited or where the condition cannot allow other means of support to the crane. Armsel can design & supply custom built under slung cranes as per customer’s requirement.   Salient Features 1. Variable speed / Frequency inverter driven motors 2. Thermistor application in lifting motors 3. Frequency inverter control system 4. Sensors to stop Hoist and G travelling 5. Enclosed Conducting System (Bus Bar) 6. Over-weight protection 7. Remote Control 8. Cable Reeling system

We offer a wide range E. O. T. Cranes, which is thoroughly checked on different parameters for their high quality. These cranes are provided in superior running conditions and in different designs as per the demands of the clients. Our cranes function using a wire rope hoist, which travels on the bottom flange of the grinder. We have attached a push button pendant to control it from the floor itself.   The main features of these cranes are as follows :   Low maintenance Sturdy construction High efficiency Durable   Our latest E. O. T. Cranes have low dead weight and greater floor coverage as compared to the traditional cranes.

Single Girder EOT cranes have high rigidity and low self-weight, which keeps the load on the gantry & railings low resulting in economical design of the complete industrial structure on which the crane has to operate.  Salient Features of Pegasus Single Girder EOT Cranes Crane girder is computer-optimized RSJ Section / Plate Built Box Section End carriages of suitable sections welded and Plate Built Box construction Travel wheels are Heat Treated & Hardened for longer life Control pendant suspended on dedicated C-railingson the cranegirder, for better operational advantage, optionally radio remote control push button pendant can be provided Option of Providing Shrouded Bus Bar for supply cables in LT in-lieu of standard Cable Festooning

With the constant support of our expert team, we are engaged in offering a great range of EOT Cranes to our customers. TheseEOT/HOT Cranes are available from 1000 kgs to 25,000 kgs. Our EOT Crane range is extremely popular due to its unique qualities such as robust structure, trouble free operation and optimal functionality. The EOT Cranes are used for various kinds of application in numerous industries including automobiles, engineering etc. These easy to use cranes adhere to international quality standards and thereby deliver superior performance. Each and every range is precisely engineered using quality tested raw materials as per the national as well as international quality standards. Widely appreciated for its load bearing capacity, application specific design and consistent performance, this range has made us win huge accolades all over.

Railway workshops Used in glass handling Manufacturing units such as paint shops, machine shops, and other single plate lifting Mechanical industries for steel stock holding Boat manufacturing industries Container lifting For lifting structure steels in construction sites

Our single grid overhead cranes have a proven track record of quality, performance and sustainability for a longer duration of time. It has a single box girder with the hoist unit running on the lower flange. Our EOT Cranes are dimensionally accurate and used in diverse industrial applications for material handling purposes. These cranes have the capacity range from 0.5 ton to 50 tons.

Tantragna cranes are manufactured as per latest is and with optimum design Capacity ranging from 5 Tonne to 60 Tonne 360 degree approach for design, manufacture and supply of cranes from Tantragna team Machined Wire Rope Drum made of quality steel and deep-grooved with a rope guide to help ensure the rope stays in the grooves. Cranes are manufactured with customer friendly, state of the art designing and world class manufacturing process Product spares are by highly reputed manufacturer / supplier having considerable experience in the line Most of the purchased items used in cranes are of standard supplier and of standard features, which lessens the spare cost and spares dependability on manufacturer for customers In single girder cranes YALE / OWN make electrical hoists will be supplied Cranes girder are of beam / box type made of steel plates SG cranes are with two number platforms on drive side of the crane and electrical panel is mounted on platform for ease in maintenance

We are offering eot cranes. eot cranes are highly acclaimed by our clients for their operational efficiency, dimensional accuracy and longer service life. Our single eot cranes have a wire rope hoist which travels on the bottom flange of the girder and controls floor operation through push button pendant.

Electric Operated Jib Crane, AC High Lifting Scisso

Underslung Cranes, Double Girder EOT Crane, Single Girder EOT Cran