Sandur Fluid Controls Pvt. Ltd. Yeshwanthpur, Bangalore, Karnataka

Agitator exclusively designed with 6 spouts, three of them radial with a centrifugal movement to produce a rotation of liquid, and three of them axial to stir the bottom. Dismountable turbine without edges, for greater security. Direct transmission shaft in stainless steel. Motor IP55 Three-phase230/400 V 50Hz 230/460 V 60Hz Single-phase230/460 V 60Hz 230V 50Hz 115/230V 60Hz 12V- DC12V DC Power-0.6 HP 12V DC 80W

FEATURES : Systems range from a basic single pump with manifold pipping on a base plate, to multiple tanks and pumps piped on a common skid with complete controls. Designs cover a wide range of capacities and materials to suit any application and industrial environment. DESIGN : Sandur Fluid Controls extensive experience in packaged systems. We can custom-build system to supplied specifications or assist with the design of a dependable, totally integrated package. DOCUMENTATION : Every system manufactured at Sandur Fluid Controls includes complete documentation. This encompasses custom system drawings produced using the latest design software, and can range from: OTHER ADVANTAGES: General Arrangement Fabrication Piping Electrical A portion of all custom system documentation pertains to inspection and testing, and this meets Sandur stringent quality assurance requirements.

The Electrofertic dosing pumps are motor driven piston pumps for dosing, made up of a worm gear reducer and one or two injection modules of 500, 750 or 1000 liter/hour with electronic regulation by means of a frequency Inverter. The dosing flow can be regulated from 10% to 100%. It is manufactured with materials which can resist any chemical. It is designed for all sorts of processes where it is necessary to dose a product into a hydraulic network, such as food, textile, chemical industry, water treatment, etc. MATERIALS Cylinder: P.P / AISI 316 / PVDF / PTFE Diaphragm: Elastomer base reinforced with fiber and P.T.F.E clothing Piston: Ceramic / PEUHMW Sealing: FPM Valve (body): P.P / AISI 316 / PVDF / PTFE Valve (ball): glass / glass borosilicate / AISI 316

Country of Origin : 230 / 400 Vac 3ph 50/60Hz

Availability : One module 48 kg (105 lb), Two modules 65 kg (143 lb)

DOSTEC-40 dosing pumps are heavy duty, high precession, motor driven diaphragm pumps for dosing liquid products. This series allows many injection possibilities depending on the head being chosen. The available heads are: 25, 50, 100, 200, 300 & 500 l/hr for the piston series, and 25, 50, 100, 200, 300 l/hr for the Diaphragm series.   DOSTEC-40 dosing pumps are manufactured with materials that can resist most chemicals. They are designed for all sorts of processes where it is necessary to dose a product into a hydraulic network, such as food, textile, chemical industry, water treatment etc. Aluminium Die-cast body Maintaince free 10% to 100% Stroke Length Adjustment Option for connect Variable Frequency Drive for providing 4-20 mA MATERIALS Cylinder: P.P / AISI 316 / PVDF / PTFE Diaphragm: Elastomer base reinforced with fiber and P.T.F.E clothingPiston: Ceramic / PEUHMW Sealing: FPMValve (body): P.P / AISI 316 / PVDF / PTFE Valve (ball): glass / glass borosilicate / AISI 316 Block: Aluminium cast

Country of Origin : 230 / 400 Vac 3ph 50/60Hz, 110/230 Vac 1ph 50/60Hz, 12/24Vd

Power : 0.37 Kw (0.5 Hp)

Metering pump There are no rotating parts in the pump and hence, no lubrication is needed. The wear and tear is negligible and the pump is virtually maintenance free.

Fertic® Hydraulic injector pump for the injection of liquid or soluble chemical into network. It is self contained, with no external parts other than the connection hoses, and with no water pressure lost in the pipes A controller can be connected that acts upon an electrical valve to start and stop the pump at the desired moment.

Electronic Dosing Pump metering pumps are solenoid driven and are controlled electronically by a PCB. The only moving part in the pump is the solenoid armature, with a maximum movement of 1.25 mm.

Sandur Electromagnetic Dosing / Metering Pumps are solenoid driven and are controlled electronically by a PCB. The only moving part in the pump is the solenoid armature, with a maximum movement of 1.25 mm. There are no rotating parts in the pump and hence, no lubrication is needed. The wear and tear is negligible and the pump is virtually maintenance free. The diaphragm is made up of high quality nylon fabric reinforced EPDM with moulded steel core and has layer of PTFE on the liquid contact area. High Quality Plastic pump body 0% to 100% Stroke frequency adjustment 10% to 100% stroke length adjustment Can accept pulse & 4-20mA signals 0.156 LPH to 11.40 LPH Capacity Maximum pressure of 20 Kgf/cm2 PRODUCT FEATURE *Compact Size *Double Ball Check Valves *High Quality, Long lasting re-inforced PTFE Diaphragm *Maximum stroke length of only 1.25mm, hence maintenance free *Nolubrication needed *Discharge Rage Accuracy ± 1% *Handles any chemical *Can accept Potential Free Pulses and 4-20 mA signals *Discharge Countdown Ratio of 1:250 *Suitable for single phase power supply of 230V (C). Pump heads are offered in PVC, PP, PTFE, Acrylic, MS & SS depending on the chemical to be handled. The shipping weights indicated above are for PVC, PP, PTFE & Acrylic pump heads and will vary for SS & MS. To select pump for specific application, following data is required. Chemical to be handled Capacity (litre/hr) Systems back pressure (bar) A wide range of accessories such as foot valve, dosing valve, check valve, pressure retaining valve, anti-siphon valve, pulsation dampener, level sensor, tank etc. are available on request to complete dosing system

Sandur electromagnetic dosing/metering pumps are solenoid driven and are controlled electronically by a PCB. The only moving part in the pump is the solenoid armature, with a maximum movement of 1.25 mm. There are no rotating parts in the pump and hence, no lubrication is needed. The wear and tear is negligible and the pump is virtually maintenance free. High Quality Plastic pump body 25%,50%&100% Stroke frequency adjustment 10% to 100% stroke length adjustment 0.54 LPH to 11.40 LPH Capacity Maximum pressure of 20 Kgf/cm2 *Compact Size *Double Ball Check Valves *High Quality, Long lasting re-inforced PTFE Diaphragm *Maximum stroke length of only 1.25mm, hence maintenance free *Nolubrication needed *Discharge Rage Accuracy ± 1% *Handles any chemical *Can accept Potential Free Pulses and 4-20 mA signals *Discharge Countdown Ratio of 1:250 *Suitable for single phase power supply of 230V (C). Pump heads are offered in PVC, PP, PTFE, Acrylic, MS & SS depending on the chemical to be handled. The shipping weights indicated above are for PVC, PP, PTFE & Acrylic pump heads and will vary for SS & MS. To select pump for specific application, following data is required. Chemical to be handled Capacity (litre/hr) Systems back pressure (bar) A wide range of accessories such as foot valve, dosing valve, check valve, pressure retaining valve, anti-siphon valve, pulsation dampener, level sensor, tank etc. are available on request to complete dosing system

n the E & B range of pumps, the frequency can be varied between 4% & 100% and the stroke length between 10% & 100%. Thus, pump can operate in the range of 0.4% to 100% of the rated capacity. While the frequency can be adjusted in steps of 25%, 50% and 100%, the stroke length can be varied from 10% to 100% in CC3 series. The pump also has an inbuilt facility for automatic control of dosing and can accept pulse signals or analogue signals of 0/4-20mA. The pump also has the additional feature for low-level indication in the dosing tank. The pump is suitable for a power supply of single phase, 230V (AC). Die-casting aluminium powder coated pump body 0% to 100% Stroke frequency adjustment 10% to 100% stroke length adjustment Can accept pulse & 4-20mA signals 0.44 LPH to 54.60 LPH Capacity Maximum pressure of 25 Kgf/cm2 *Compact Size *Double Ball Check Valves *High Quality, Long lasting re-inforced PTFE Diaphragm *Maximum stroke length of only 1.25mm, hence maintenance free *Nolubrication needed *Discharge Rage Accuracy ± 1% *Handles any chemical *Can accept Potential Free Pulses and 4-20 mA signals *Discharge Countdown Ratio of 1:250 *Suitable for single phase power supply of 230V (C).

Power Source : Gasoline

Power : 0.37 Kw (0.5 Hp)

Availability : 10 kg (22lb)

The demand for safe drinking water is increasing day by day due to burgeoning population and industrial growth. The portability of water from natural sources has become questionable owing to various types of contamination. The quality of water from underground sources on which most of the Indian population depends, is determined by the geological structure of the site and varies widely. The contamination of water with fluoride has been identified in ground water from major parts of India. Because of this, the people in over 15 states have fallen victims. Excess of fluoride over 1.5 ppm (mg/l) in drinking water causes Fluorosis (Dental & Skeletal) and it has become essential to take remedial measures to solve this mammoth problem. Today's process of Defluoridation is being done by using Activated Alumina or by Reverse Osmosis methods, both of which result in further contamination of ground water due to wastages. Hence the need of the hour is not just Defluoridation but also to prevention of wastages getting into ground. MAIN ADVANTAGES : No addition of any chemical to remove fluoride No pre of post treatment of water Electrochemically generated aluminium hydroxide is more active Helps in charge neutralisation of other colloidal impurities Automatic removal of other contaminants such as Ca, Mg, HCO3-, Fe2+ etc to certain extent METHOD: The system involves a simple mechanism of ELECTROCHEMICAL PROCESS, hence there is no necessity of addition of any chemical. It is a combination of electro-precipitation, electro-coagulation and electro-flotation. OTHER ADVANTAGES: No usage of chemical for regeneration (as in case of Activated Alumina) No chemical cleaning of Electrodes No further ground water contamination (as in case of Reverse Osmosis) No wastage of water (as in case of Reverse Osmosis) The cheapest method No special training required and can be operated by unskilled persons Most efficient, reliable and simple system Automatic removal of hardness to certain extent No change in pH value Highly reliable and proven technology Community model, hence simple logistics to supply fluoride-free water to villages

Controller, according to pH/ conductivity/ flow/ external signals, controls the network through automatic regulation of a MULTIFERIC dosing pump with several heads by means of an inverter.

Number Of Flower : Automatic

Country of Origin : 220V

Display Type : Digital

Frequency : 50Hz

Driven Type : Electric

Certificate : CE Certified

Current Type : AC, DC

Chemical dosing pumps a maximum movement of 1.25 mm. There are no rotating parts in the pump and hence, no lubrication is needed. The wear and tear is negligible and the pump is virtually maintenance free.

We are leading manufacturer, supplier and exporter of huge range of skid mounted dosing system in India.

We are offering turbine agitator controllers. Agitator exclusively designed with 6 spouts, three of them radial with a centrifugal movement to produce a rotation of liquid, and three of them axial to stir the bottom. Dismountable turbine without edges, for greater security. Direct transmission shaft in stainless steel. Motor ip55 three-phase 230400 v 50hz 230460 v 60hz single-phase 230460 v 60hz 230v 50hz 115230v 60hz 12v dc 12v dc power 0.6 hp 12v dc 80w

Hydraulic piston dosing pumps hydraulically driven. Flows from 25 lh to 500 lh with working pressures from 1 to 12 bar. Manufactured in plastic materials resistant to most chemical products used in applications for agriculture, livestock and water treatment.

Main Advantages : No addition of any chemical to remove fluoride No pre of post treatment of water Electrochemically generated aluminium hydroxide is more active Helps in charge neutralisation of other colloidal impurities Automatic removal of other contaminants such as Ca, Mg, HCO3-, Fe2+ etc to certain extent Method: The system involves a simple mechanism of ELECTROCHEMICAL PROCESS, hence there is no necessity of addition of any chemical. It is a combination of electro-precipitation, electro-coagulation and electro-flotation. Other Advantages: No usage of chemical for regeneration (as in case of Activated Alumina) No chemical cleaning of Electrodes No further ground water contamination (as in case of Reverse Osmosis) No wastage of water (as in case of Reverse Osmosis) The cheapest method No special training required and can be operated by unskilled persons Most efficient, reliable and simple system Automatic removal of hardness to certain extent No change in pH value Highly reliable and proven technology Community model, hence simple logistics to supply fluoride-free water to villages

DOSTEC-40 dosing pumps are heavy duty, high precession, motor driven diaphragm pumps for dosing liquid products.

Country of Origin : India

Number Of Flower : Dosing Pumps

Application : Water Supply

DOSTEC-50 dosing pumps are heavy duty, high precession, motor driven diaphragm pumps for dosing liquid products.

Country of Origin : India

Number Of Flower : Dosing Pumps

Application : Water Supply

Availability : 10-20kg, 20-30kg, 30-40kg