Cyclone Separators Dealers

We are an eminent manufacturer and supplier of Dust Cyclone Separator based in Sidhpur, Gujarat. The machine we offer has a good performance, is compactly and robustly built and is resistant to corrosion. The separator is durable and consumes less energy. This machine is manufactured using good quality components and is in compliance with all norms and standards set by the industry.   Application : In general, cyclones are used to remove dust and other product streams from processing operations. There are many factors that directly affect the efficiency of a cyclone. Tests have shown that, in general, the longer the cone the higher the efficiency. However, physical limitations on site sometimes limit the height available. Aysha engineers performed extensive testing to determine cone lengths that maximize efficiency yet keep plant restrictions in mind. The manner in which the air and product enters the cyclone also affects its efficiency. Nice pioneered the concept of keeping the inlet centerline tangent to the outside edge of the cyclone. This smooth introduction reduces turbulence and increases efficiency of Nice cyclones. The smoother the inside surface, the more efficient the cyclone. Along the same lines, perfect roundness maximizes efficiency. Nice employs state-of-the-art cutting and rolling equipment to ensure that Nice cyclones are perfectly round and symmetrical with smooth interior surfaces. Most importantly, Aysha engineers have the experience and know-how to properly size and apply Nice cyclones. Air volume, density, temperature, humidity along with product characteristics sometimes create complicated sets of criteria. Nice's experience in designing systems along with its expert craftsmanship provide our customers with highly efficient cyclone applications.

Backed with industrious professionals, we keep a stern check on the products to ensure that the range is commensurate to international norms. Our team of experts is capable of entertaining the voluminous orders in shortest time possible.

We are engaged in manufacturing performance oriented range of cyclone separators which are highly appreciated among our valued clients. In the cyclone separator the dusty air is introduced at the top of the separator through the pipe. Thus, the peripheral vertex is formed from downward gases which give rise to the centrifugal force. This force throws the dust particles on the wall and then move downwards towards the hopper. Then cyclone separator is removed through the draw off pipe which facilitate in lowering the industrial pollution. These are manufactured in accordance with client specifications and can be delivered within stipulated time frame. Following are its noteworthy features : low resistance to flow simplicity and reliability no moving parts low maintenance requirements

We are a well-reckoned Manufacturer and Supplier of Cyclone Separator in Maharashtra, India. Cyclonic separation is a method of removing particulates from the air, gas or liquid stream, without the use of filters, through vortex separation. Rotational effects and gravity are used to separate mixtures of solids and fluids. The method can also be used to separate fine droplets of liquid from a gaseous stream. Our deft professionals thoroughly examine it against the stringent quality parameters before forwarding it to our clients.

We are An ISO-9001:2015 certified company & air pollution control device cyclone separator manufacturers in Delhi India. Centrifugal collectors use cyclonic action to separate dust particles from the gas stream. In a typical cyclone, the dust gas stream enters at an angle and is spun rapidly. The centrifugal force created by the circular flow throws the dust particles toward the wall of the cyclone. After striking the wall, these particles fall into a hopper located underneath. The most common types of centrifugal, or inertial, collectors in use today are: Single-cyclone : separators They create a dual vortex to separate coarse from fine dust. The main vortex spirals downward and carries most of the coarser dust particles. The inner vortex, created near the bottom of the cyclone, spirals upward and carries finer dust particles.   Multiple-cyclone : separators Also known as multiclones®, consist of a number of small-diameter cyclones, operating in parallel and having a common gas inlet and outlet, as shown in the figure. Multiclones® operate on the same principle as cyclones—creating a main downward vortex and an ascending inner vortex. Multiclones® are more efficient than single cyclones because they are longer and smaller in diameter. The longer length provides longer residence time while the smaller diameter creates greater centrifugal force. These two factors result in better separation of dust particulates. The pressure drop of multiclone® collectors is higher than that of single-cyclone separators. Cyclone systems consist of the following components: Ductwork and fan system A Inlet chamber Conical Shape Rotary Air Lock Outlet Duct We Provided Complete System for following Industry Steel Induction Furnace Steel Re-rolling Mill Industry Sponge Iron Plant (DRI) Boiler (Heating process & Power Palnt) Lead Recycling Plant Aluminium Recycling Plant Copper Recycling Plant Dross Recycling Plant Slag Processing Unit Process Furnace Chemical Process Plant Casting Units Rice Mill Industry Wire (Binding) Industry Plywood Industry Paper Mill Lime Kiln Cement Kiln Textile Mill Fertilizer Plant

We are instrumental in offering superior quality Cyclone Separator Manufacturer, Exporter and Supplier in Coimbatore, Tamil Nadu. This Cyclone Separator is used for separating solid particles from the liquid entering into seal chamber by centrifugal force. Clean liquid (about 80%) is sent to seal chamber and solid particles with very little liquid (about 20%) is sent back to suction of the pump. Our Cyclone Separators are made with the use of superior quality components and are extremely durable. Moreover, these Cyclone Separators can be obtained at market leading prices.