Fuel System Dealers

Dual fuel burners can be used in applications wherein the fuel can be either gas or oil.  

our fuel monitoring & vehicle tracking solution is one of the best telematics solutions in india.fuel monitoring is time tested for less than 1% error in fuel level detection in vehicles. It has been deployed in various trucks, cranes, diesel generators & storage tanks.

DIFMACS is designed using Micro Controller to monitor fuel levels in real-time. It interfaces with Level sensor through 4-20mA signal and compute the fuel level accurately. The system can also be programmed for tanks of various shapes and profiles. The tank profile information can be programmed through the keyboard interface provided on the console. It communicates the measured values in litres to external devices through the built-in communication port. This facilitates remote monitoring of Fuel levels from a central site. The built-in 7segment LED display assists is monitoring the fuel level locally. The system is designed in with 3 relay outputs for alarm indication for High Medium Low fuel levels.Built-in key pad for programming tank profiles after password validation.

The Apsis Remote Fuel Monitoring System (ARFMS) provides real-time monitoring and management of monitoring Diesel/Petrol in Vehicle Fuel Tank,Mobile Tankers Ferrying Fuel Oil and Power Generator Sets providing alerts and notifications,and offers easy-to-use vehicle and DG real time information.The Apsis Remote Fuel Monitoring System (ARFMS) provides reliable, real time cost-effective, fuel consumption monitoring and management. Combining GSM/GPRS wireless communication with an easy-to-use web-based management application, the Apsis Remote Fuel Monitoring System (ARFMS) ensures constant, on-demand access to Fuel present / consumed information at any time, from any place.    

Cummins Fuel System products enable precise injection of highly pressurized fuel for efficient combustion in mid-range, heavy duty and high horsepower engine markets. They also enable our customers to meet increasingly stringent emission requirements while maximizing fuel-economy and performance. CFS is a pioneer in the field with many firsts in technology like the 2600 bar common rail-fuel system.

Wesman's standard assembled Gas Train is supplied either for inlet gas pressure of 1 bar, 2 bar or 4 bar. The gas train is compiled with safety system and constant pressure regulating system as per universal safety regulation. - Standard gas train range up to 585 Nm3hr Natural Gas flow. - Special gas train ranges up to 2000 Nm3hr Natural Gas flow. - Constant gas pressure regulation required for burner application. - Safety Valve to protect the downstream equipments in case of any abnormality. - Mechanical Relief Valve to vent out the over pressurized gas to safe the system. - Block and bleed valve with pressure switches for safe operation.

These electronic sensors are mounted on the fuel tank of the vehicle and integrated with Tracer - Real Time Vehicle Tracking System. These sensors do not interfere with fuel line and does not affect the engine operations. Our Fuel level sensor provide reliable, more accurate and stable fuel level even under extreme conditions. Tracer fuel level sensor can be used to measure real time fuel level in the vehicle fuel tanks and storage tanks.

Fuel handling systems from Off-loading Pump sets to final Delivery Pumps and ElectricSteam heater sets are readily available with SSE&S . In addition to design advantages, SSE&S use only those components that measure up to SSE&S high engineering standards.

Fuel monitoring system gives you an easy and cost-effective way to reduce fuel costs and increase productivity. Now you will be able to see and calculate the exact fuel consumption.

Project: Fuel Handling System System Scope: – Husk Handling System – Mechanical Ash Conveying System for handling Husk Ash Client: Uthong Location: Thailand

MEDIA:-NAPHTA AND HSD PRESSURE:-UPTO 35KG/CM FLOW UPTO:-50 CUBIC METER PER HOUR  

fuel monitoring system And last but not least Accurate Fuel level monitoring system with our advanced Ultrasonic Fuel sensors Accurate fuel level in the vehicle Fuel Theft indicationalarms

we are offering fuel monitoring system.green ark’s –fuel monitoring system is used for the real time monitoring of the fuel level in the dg tank features: -capacitive level sensing technology fuel level measurement: in height (mm), in volume(liters) and in percentage of total tank capacity -detection of refill, consumption and pilferages of fuel from tank -detection of dg start and stop through vibration sensing. -provision for adjustment of the length of sensor using a flange -designed to power from dg battery voltage(12v) -completely sealed to prevent any fuel ingress into the sensor electronics benefits: -minimizing dependency on human intervention and control over the same -measure and alert the no. Of liters of fuel consumed, pilfered and refilled -end to end fuel audit -detects and alerts pilferages and refueling with date and time stamp via sms and e-mail parameters obtained: -fuel level(liters) -dg onoff status -dg startstop time -dg run time -fuel consumption per hour -fuel re-fill startstop time -fuel re-fill(liters) -fuel theft startstop time -fuel theft(liters)

This system is designed to familiarize the students to the basics of an fuel cell system. The trainer will demonstrates the operation of a PEM fuel cell systems. Extensive experimenting capabilities and comprehensive and revised instruction material with predefined experiments make it a complete instruction package. All components of the fuel cell system are displayed individually. Integrated displays for operating parameters support the instruction. The Fuel Cell Trainer modularity allows to easily adapt the difficulty level. 

This system is suitable to control the fuel (diesel) temperature within the range of +40 oC to +45 oC (6 oC higher than cooling tower water temperature) throughout the test, at the engine inlet. For lower temperature range chiller is provided. Fuel from the in-cell tank is passed through a heat exchanger, which is made of SS sheet metal.  The water controlled at specific desired temperature is used to remove heat from fuel flowing through the heat exchanger. It is observed that the temperature of fuel is maintained with ± 1 oC. The system comprises:Digital Temperature Indicating Controller For HeaterA heaterBosch Fuel PumpAir Separator A sight flow indicator is provided in the fuel circuit for visual flow indication. Following Auto functions are provided: Auto priming module for fuel Auto venting valve with interlock Auto fuel draining (Suction type)

The Variable Speed Governor (VSG), an innovative product from MSG’s R&D is a product as a result of end user feedback on needs for automatic multiple speed adaptation in the same product for different speed zones (City Highway etc.). Using the VTS, the vehicle can be tracked anywhere in India world. The product is fully compatible with the MSG Electronic Speed Governor thus delivering the benefits of Speed Control, Variable Speed Control & Vehicle Tracking.

Automating compliance while optimizing operations. Problem solved. Veeder-Root is the most experienced provider of fuel tank monitoring systems in the world. We do more than just automate your compliance and fuel monitoring; we protect your business investment. We’ll help you assess your total operations. Then we’ll tailor a tank monitoring system that provides timely access to the information you need to prevent losses to your product, your profits, and your reputation. Because Veeder-Root is the world’s number-one supplier of automated tank gauges, there’s virtually no problem we haven’t solved, no advantage we haven’t engineered.

Interested buyers can contact us anytime for placing orders; we ensure timely delivery of the same. To ensure quality of the products, we conduct diverse quality tests at all stages and thus our products are quality assured.

This is a unique modular constructed organic fuel system which works on the principle of a biological reaction process involving use of specifically and finely cultured microbial ecosystem for aerobic and an-aerobic digestion of organic feedstock.

The TraceTek® Leak Detection and Locating System was developed by the international material science manufacturing company Raychem in the early 1980s and Raychem products are in use in tens of thousands of leak detection applications worldwide.The key is quick detection and accurate location at the source of the leak. TraceTek sensor cable and monitoring systems let you do that, because if offers you: Reliable and accurate fl uid leak detection systems for pipelines, tanks, wharfs and airports, pumps and valves. 

SCOPE OF USE: Rotoflow used for emptying the silos that store flour, cereal, bran and other grains.Exit hole is connected to the main body by steel joints and which hole is vibrated byvibro motor. So the product in the silos can easily over the tube screw and conveyor. Itassembles to the concrete and steel silos.   Strong body and high efficiencyEasy montage and demontageNoiseless vibration and operationLong life and durabilityMaximum quality andNo erratic flow in dischargeApplication to the existing silos available