Metering Units Dealers

We are the perfect destination for the best quality Resin Cast Transformer in the market. These Resin Cast Transformers are made of resin cast substances that are fire and humidity resistant and non -polluting in nature. Our Polyester Resin Cast Transformer can endure higher impulse voltage and temperature making it more reliable than the usual power transformers. They are suitable for installation on high- rise building where fire safety is a concern. Features : Fire resistantHumidity resistantRust freeDurable Specifications System Voltage : Up to 11kV voltage classOther specifications available as per the requirement of the clients.

Our firm offers high quality BPC Flow Meter Unit. The BPC Flow Meter Unit comprises of a rotary pin valve to permit adjustment of the flow rate. The outlet at the bottom of the unit is fitted with a removable nipple. The flow accuracy remains unaffected by back pressure due to downstream pressure caused by humidifiers, nebulizers, etc. CharacteristicsHighly efficientAccurate readingReliableHigh resistance to corrosionLong operational lifeHigh durability Demanded ByHospitalsNursing homesResearch Centers

Intrans make Outdoor metering cubilcle consists of two Current Transformers and One Potential Transformers along with Test Terminal block and Fuses enclosed in a powder coated Galvanised Iron Enclosure confirming to IP54 Standards.

Flow Meters Demonstration Unit EXERCISES AND PRACTICAL POSSIBILITIES Some Practical Possibilities of the Unit : 1.- To demonstrate the important characteristics of fourteen types of flow meters used in the measurement of water flow through pipes or open channels. 2.- Comparing the use, application and limitations of different types of flowmeters. 3.- To study the application of Bernoulli’s Theorem. 4.- Understanding the principles on which various types of flow meters are based. 5.- Implications of performance, convenience, accuracy, head loss, etc. on flow meters selection. 6.- Effect of the air in the hydraulic stream on flow meter performance. 7.- To use manometers to measure pressure drop. 8.- Relating pressure drop across a flow meter to flow rate. 9.- Measure error determination using the venturimeter. 10.- Factor Cd determination in the venturi. 11.- Strangulation determination in the venturi. 12.- Measure error determination using the orifice plate. 13.- Factor Cd determination in the orifice plate. 14.- Effective area determination in the orifice plate. 15.- Measure error determination using the Pitot tube. 16.- Factor Cd determination in the Pitot tube. 17.- Measure error using the swinging flap meter. 18.- Measure error using the rotary piston meter. 19.- Measure error using the shunt gapmeter. 20.- Energy loss comparison in the different meters. 21.- Measure error using the helical rotary type flowmeter. 22.- Measure error using the inferential multistream type flowmeter. 23.- Broad crested weir. 24.- Crump weir. 25.- “H” flume. 26.- Washington flume.

11 KV and 33KV CT:PT Combined Metering Unit is an oil cooled system. This system can be made in 3 phase 3 wire and 3 phase 4 wire configurations. This is suitable to be mounted on single as well as double pole system.  A meter box (sold separately) can also be attached under the unit with the help of LT gland and G.I. pipe (also sold separately). This system is widely used across the country for metering and check-metering purposes.

Intrans make Outdoor metering cubilcle consists of two Current Transformers and One Potential Transformers along with Test Terminal block and Fuses enclosed in a powder coated Galvanised Iron Enclosure confirming to IP54 Standards.

Tarang module Based Pulse metering units mountable to any Gas meter for metering. The Most Economical Solution to enable the Wireless metering in to the Suvana RF GAS AMR is a wireless module which is specially designed for applications where the Pulse output of various metering devices need to be incorporated into a wireless network for creating the cost effective AMR solution. The Output of the GAS meter is directly connected to RF GAS AMR unit with enclosure of IP-65 unit. The running Pulse count will be stored in the local memory, the local total count will be transmitted in the Wireless Network at preset time interval to the Coordinator through Star/point-point network. An open, bi-directional & extensible infrastructure that uses low-cost devices to send the data from Gas meters. Secure, store, forward, acknowledge mechanism ensures high data reliability, easy to install, capable of handling expanding network of meters with minimal latency virtually maintenance free  FEATURES   RF frequency of 865MHz to 869MHz. Very Low Power, Battery operated. Spring Antenna. On Board Power Control. Built in Controller. Monitors and counts the meter Pulses Accurately. Internal Tamper Detection local log and immediate Reporting to DCU. On Board RTC and auto alignment with DCU time. Internal Backup of Count log data for 1week. Over the Air Download of the same. Over the Air Configuration of the metering Devices. Acknowledgement based point-to-point & multipoint communication with data hopping over repeaters. Settable channels, baud-rate, air-data rate and RF Transmit power. Operates on 865GHz Frequency at 256kbps. Operates on ½AA size, 3.6V battery. Retrofit table / Adaptable to any Meter make. Battery life more than 4 years.

Manufacturer, Exporter & Supplier of CT PT Metering Unit; we are a well-known name in this domain. We are staffed with dexterous team members and they design the Metering Unit using modern and upgraded machines along with the innovative technology; we use exceptional raw component for the same. We are working under the guidance of professionals; they make certain that the Units commensurate to Set Standards.

we are the reckoned as the chief manufacturers and exporters of transformer metering unit. It is an outdoor dry type unit up to 11kv and oil field paper or film insulated up to 33kv. Generally, these units are pole mounted and are available in three phase three wire or three phase four wire system. The transformer metering unit is used for single or double metering with tri vector meter and energy meter. These units are available in various designs: 03 nos. Single phase ct & 1 nose three phase pt 02 nos. Single phase ct & 3 nose three phase pt 03 nos. Single phase ct & 3 nose three phase pt features highly functional long service life precision design efficient performance

These are combination of Current & Potential Transformers units used for 3 Phase HT Metering purposes in Indoor or Outdoor applications, with accuracy upto 0.2S class. Used for HT Metering, Voltage Class: 11KV 22KV 33KV class, Manufacturing as per IS & IEC standards, Primary Current, Accuracy Class, Burden and Number of Secondary Cores Windings as Specified.

We are leaders in manufacturing and supplying quality CT-PT Metering Unit. We are offering CT-PT Metering Unit up to 33 KV. CT-PT Metering Unit is known for offering good performance. The CT-PT Metering Unit is used for both indoor and outdoor applications. The CT-PT Metering Unit is of dry type or oil immersed. Why Our CT-PT Metering Unit? Good quality componentsPerformance-orientedDiscounted price CT-PT Combined Unit Consists Of 02 nos. or 3nos. single phase CTs & 03 nos. single phase PTs02 nos. single phase CTs &01 no. three phase PT03 nos. single phase CTs & 01 no. three phase PT

Measuring Cup Metering Packaging Unit consists of a measuring cup metering machine and one VFS4000 vertical filling packaging machine. It is especially suitable for metering and packaging of fine particle material. It integrates the functions of automatic metering, bag-making, packaging, sealing, printing and counting. The operating interface adopts advanced touch screen. Technical Parameters: Model - VFS5000DS Bag size mm - (50~280)×(80~180) Metering range g - 100~500 Measuring accuracy - 1% Packaging speed bagsmin - 30~70 Remarks - Single-row unit (Other weight is customizable) Model - VFS5000DSS Bag size mm - (50~280)×(80~180) Metering range g - 1% Packaging speed bagsmin - 100~120 Remarks - Double-row unit

ITEM CT/PT METERING UNITS 33 KV, 22 KV, 11 KV APPLICATION POWER STATIONS & MAJOR POWER CONSUMERS WHO METER ENERGY CONSUMPTION MAXIMUM DEMAND ETC. SPECIFICATION INPUT : 33 KV, 11KV, 3PH 50 HZ A.C OUTPUT IN VOLTAGE : 110V-3 PH 40 HZ A.C CURRENT : 5 AMP. VA FOR VOLTAGE : PT - 100 VA FOR CURRENT : CT - 15 CLASS OF ACCURACY : 1% / 0.5% ERROR SYSTEM VOLTAGE : 12KV (11KV), 24KV (22KV) 36KV (33KV) INSULATION LEVEL : 28KV, 50KV, 75KV IMPULSE VOLTAGE : IMPULSE CURRENT : COOLING : AN ON BENIFITS COMPACT DESIGN, CONFIRMING TO RELEVANT STANDARD, LONG LIFE.