Strip Heaters Dealers

Anupam's Ceramic Strip heater provides the ability to withstand higher temperatures . Anupam's Strip heaters, often considered component heaters, are a simple way of using surface area to transfer heat effectively. A fairly inexpensive way of heating surfaces or small areas, strip heaters are an excellent solution to meet any budget. If strip heaters are used as a radiant heater, they have can have fins to maximize surface area and heat transfer to the air. Our Ceramic Strip Heaters are dependable and reliable flat heating elements – designed to provide efficient heat to flat surfaces from common to industrial applications. The seamless sheath design of Ceramic Strip Heaters makes them ‘dimensionally’ stable in milled slots. Construction Ceramic Strip Heaters are constructed with ceramic insulation that quickly conducts heat from the resistance wire to the sheath resulting in low internal temperatures and long heater life in the most demanding applications. Precise placement of the resistance wire provides uniform sheath temperature across the width and along the entire heated length. This is an extremely rugged construction capable of high temperatures and high watt densities. The inner construction consists of wound nichrome resistance coil. The inner flexible wire is strung through ceramic insulator pieces. The coils are attached to the screw terminals, or high temperature lead wires, for a positive connection. MgO (magnesium oxide) is used to fill and pack open areas surrounding the coils. The MgO material helps increase the elements thermal conductivity and dielectric strength. FEATURES High heat transfer rates and fast heat up Ceramic construction for higher temperatures Long life Large selection of lengths, sizes and terminations Low expansion characteristics Distributed wattage available MOUNTING SUGGESTIONS Ceramic Strip heaters must be clamped securely along a smooth metal surface (along their complete length). When a Ceramic Strip Heater is supported by mounting tabs, ensure that the terminal is secured firmly, and that the opposite end remains loose to allow for expansion. Do not over-tighten nuts when installing, as over-torquing terminals will create internal heater damage. Ovens Hot Plates Dropping resistors Dies Molds Drying Melting Baking Incubators Platens Food Warmers Welding Preheating Air Heating Sealing Bars Thermoforming

Finned strip heaters are with locked on finns for fast heat transfer to air by larger heating surface area. It is required for convection heating.   Uses For Mounting Across Air Stream With forced air Ducts Blower Units

CAST STRIP HEATERS AND CAST PLATE HEATERS are tubular heaters cast in aluminum or bronze alloy.   Application   Extrusion dies Flat machinery parts Sealing applications Platens   Features   Contamination proof Rugged construction 10-32 screw terminals 1” thick .440 tubular heater  

Leveraging on our rich industry experience, we are reckoned among the preeminent Manufacturers, Exporters and Suppliers of Mica Strip Heater. Our range of heaters is in strong development for air, process heating and refrigeration. These are available in  electro plated steel or stainless steel. One can obtain these at reasonable rates from us. Details The heaters are a fantastic decision for surface contact heating. Various mounting screws are utilized at the ends as a part of the centre of the heater to prevent separation because of thermal expansion. We have some expertise in offering an extensive variety of Finned Strip Heaters to our clients.

Strip Heaters (Mica Refractory Insulated) are made from Kanthal make wire element supported on Mica Sheet or in Fluted Refractory, which is sheathed in rust resisting steel. End-tab holes are provided for mounting. Applications: Provides black heat in ovens, Industrial and commercial heating chambers converters & panel boards. Finned Strip Heaters are basically Heavy Duty Refractory insulated strip heaters with locked on fins for fast transfer of heat to air. Application: In forced air ducts, blowers units, ovens, dryers etc

Specifications-: We manufacture wide range of strip heaters. Our range of strip heaters are made using high quality materials like aluminum, steel and zinc-coated steel. The insulation is made up of different materials like: Magnesium oxide (MgO) Mica Fiberglass The different types of mounting styles of our strip heaters are: Mounting tabs with holes Mounting…

These Strip Heaters are made up of high quality Nichrome ribbon wire that is insulated in fluted refractory. Specially selected Mica strip providing the heat distribution for maximum heater life. Mica of proper thickness is used to insulate the windings, providing excellent thermal conductivity and dielectric strength. The elements are encased in specially treated rust- resistant steel / stainless steel casing to provide physical strength and good thermal conductivity for sheath temperature upto 3000 C Type 304 Stainless Steel Sheath provides resistance to high temperature and corrosion, dependable at sheath temperatures of up to 5500 C .

Electron's mica strip heaters are constructed with the highest quality material available. A resistance element is wound around a sheet of mica, insulated on both sides with mica, and then a sheet of coated steel is folded around the composite layers of mica. Strip heaters are used in a wide variety of industrial applications. The most frequent use is to heat metal parts (such as dies and platens) by clamping one of the flat surfaces on the metal part. They are sometimes used as heaters for hoppers and other containers to heat the liquid or solid containers.

These heaters get their shape from square porcelain beads arranged to suit required dimensions & specifications.  These heaters are supplied in M.S. or S.S sheaths available in different connections.  They are also available with M.S./S.S fins for efficient heat transfer.  Used in dyes, moulds, ovens, plastic forming and sealing, air heating, baking etc.

Typical Applications   Duct Heating   Drying Ovens   Shrinking Tunnels   Heat Curing   Space Heaters   Food Warmers   Air Heating   Dehumidifier Design Features   Rugged Durable Construction   G.P Sheath Fins   Galvanised Plated Sheath   Various Terminations   Made to Customers Specifications   Trouble Free Installations Emkay Finned strip Heaters are designed foroptimum operating efficiency and performance EMKAY FINNED STRIP HEATERS are extremely efficient and dependable as a heat source for hundreds of industrial and commercial applications. Used for mounting across air stream with forced-air ducts, or to heat by convection. Galvanised plated fins are mounted to the rectangular tubing. The fins have been specially designed to provide maximum surface contact for good heat dissipation into the finned Cross Sections, thus resulting in rapid heat transfer to air. EMKAY FINNED STRIP heaters are manufactured in a full line of standard sizes, electrical ratings and terminations or made to your specifications. Products Heaters : Mica Band Heater | Ceramic Band Heater | Ceramic Strip Heater | Ceramic Finned Strip Heater | Tubular Heater | Tubular Heater Finned Type | Cartridge Heater(HD & LD) | Sealed Nozzle Heater | Mica Insulated Strip Heater Heat Controllers & Accessories : Thermostat Heat Controllers 20A | Thermostat Heat Controllers 15A | Simmerstat Energy Regulator | Limit Switches Energy Power Saver : Ceramic Jacked Heater | Mica Jacketed Heater | ISO-Thermal PadOther Products : Emkay Counting Meter | Emkay Welding Torch | Emkay Heat Tracers 

• A Mica Strip heater is a device which is mounted on a surface and used to heat the surface or air. • Available in various lengths and configurations. • Mica strip heaters are constructed by winding of Nickel Chrome ribbon around mica insulation and encapsulated in stainless steel sheath. • They are available in an extensive variety of sizes and shapes with option for hole, notches and cut-outs. • These heaters mostly used in plastic processing applications and for anywhere heat is needed on curved or flat surface.

TECHNICAL DATA : Generally available from 0.5 kw to 3.5 kw, 240 Volt Ac50 Hz single phase. Operates upto 400° F. Spl. heater can also be made according to specification,avoid the leakage of current and to ensure the long life of the heaters. Finns *(3”x1.5”), **(3.5”x1.5”) which increase the output of heat to the maximum dissipation and having screw type terminals on one end for proper connection.

We Manufacture and Export strip Heaters of High Quality. the Strip Heaters are Available in Ss Sheathed Design with a Working Temperature of 350c. the Strip Heaters have a " U" Type Design. These Heaters have a Long Life. We Offer Strip Heaters E in Various Sizes. Spark Enterprise also Offers Elements Type Heaters and Refectory.