Test Probes Dealers

(77 products available)
  • Premium
    Am-09 Probe Holder

    Am-09 Probe Holder

    Get Price Quote

    • MOQ10 Piece
    • Country of OriginIndia
    • MaterialIron & Mild Steel
    • PatternPlain
    • Usage/ApplicationIndustrial
    • Pin Size8 mm
    • GradeManual
    • SurfacePaint Coated
    ...more
    www
  • Premium
    Renishaw Module tp2 Probe

    Renishaw Module tp2 Probe

    90,000 / ONE

    • Number Of FlowerProbe
    • ApplicationMachine Use
    • Packaging TypePolished
    • FeatureNon Breakable, High Tensile, Accuracy Durable
    • Country of OriginIndia
    • ConditionNew
    •  Reinshaw probe Medule   Tp 2.
    www
  • Switch Probes

    Switch Probes

    280 /

    • MaterialStainless Steel
    • BrandMicrofix
    • Pin Size8 mm
    • Frequency4 MHz
    • Usage/ApplicationIndustrial
    • PurposeSwitch probes
    ...more
  • Multi-parameter Probe MPS-D8Qualilog8

    Multi-parameter Probe MPS-D8Qualilog8

    Get Price Quote

    • MOQ1 piece
    • Brand NameSeba
    • Equipped with up to 12 sensors, by which 16 different water quality parameters can be measured, the SEBA multiparameter sensors provide reliable informations about the conditions at the measuring site. The multiparameter sensors MPS represent the consequent further development of the SEBA multiparameter product line. The calibration will be performed via user friendly software SEBAConfig. The Availability of high data quality is the base for proper evaluation of the hydrological enviroment. To display the measured values the MPS sensors can be combined with the SEBA electric contact meter (mainly for ground water) or with the SEBA MPSChecker (mainly for surface water). Continuously monitored measuring sites can be equipped with SEBA data loggers with or without data transmission (e.g. Unilog) or with integrated logger. Designed for robust use in the field the sensors perform under roughest conditions like e.g. in tropic, arid and arctic enviroments. Rugged and ready for all uses in the field they measure with optimum precision. SEBA sensors stand out due to high long-term stability (optical sensors) together with low maintenance requirements and can be used as stationary or mobile sensors.
    ...more
  • Single Crystal Normal Probes

    Single Crystal Normal Probes

    2,500 /

    • MOQ1 Piece
    • Country of Origin220V
    • MaterialSS
    • Accuracy98%
    • Frequency4 MHz
    ...more
  • Test Probe

    Test Probe

    Get Price Quote

    • FeatureRust-proof, Durable, Fine finish
    • Wire60/42 strands and O.D of wire: 3.8 mm
    • Insulation MaterialA.B.S. 1 m
    • Contact Materialbrass, nickel plated
  • Touch Probe +3

    Touch Probe

    4,000 - 15,000 / piece

    • MOQ4 Piece
    • ConditionNew
    • ApplicationIndustrial Use
    • Number Of Flower3d Touch Probe, Coordinate Measuring Machine
    • Accuracy1-2 Micron
    • Country of OriginIndia
    • MaterialSteel, Tungsten carbide , Ceramic, Carbon Fibre
    • Screen ShapeRound
    • CertificationAs per industry standards
    • Display TypeAnalogue
    • Storage Temperature0 To 60 Deg C
    • Service Type3D Touch Probe
    • SizeAll size of ball dia.
    • Usagefor CMM & Machine tools probe
    • ProductRuby ball tip , CMM tips
    • Usagefor all measuring instrument, CMM faro arms
    • ThreadM2, M3 , M4, M5
    • Complete range of styki for CMM, Machine tool Probe  Straight styli Star styli   Disc styli Steel, Tungesten Carbide, Ceramic,  Carbon Fibre,
    ...more
  • Multimeter Test Probe

    Multimeter Test Probe

    Get Price Quote

    • Current Rating –20 amps/10 KV
    • High quality Multimeter test probeInsulation – PolypropelenePin – BrassSpring – Phospherous Bronze
  • Premium
    Electric Flow Test Probe +5

    Electric Flow Test Probe

    Get Price Quote

    • Number Of FlowerTest Probes
    • ApplicationLaboratory
    • MaterialStainless Steel
    • Pin Size8 mm
    • Display TypeDigital
    • Automation GradeSemi - Automatic
    • ConditionNew
    • The Flow Probe incorporates the unique Turbo-Prop propeller sensor, which uses the most accurate positive displacement technique available for velocity sensing. The Turbo-Prop is designed to shed debris and is protected inside a 2 inch diameter housing. The probe housing may be placed directly on the bottom of a pipe or streambed for measuring low flows down to 2 inches in depth. The flow meter propeller rotates freely on its bearing shaft with no mechanical interconnections for minimal friction. Magnetic material in the propeller tip passes a pickup point in the water velocity meter handle producing electrical impulses that are carried to the readout display by an internal cable. The Turbo-Prop is easily removed for cleaning or replacement. NOTE: We recommend re-calibrating the water velocity computer every time the Turbo-Prob sensor is replaced. Contact our Technical Support department for more details. Water Velocity ComputerThe water velocity computer receives an electrical signal from the propeller, amplifies the signal, and converts the reading to feet per second (or meters per second, depending on programming). The large LCD screen displays average, minimum, and maximum water velocity readings. Up to 30 sets of minimum, maximum, and average data readings can be stored in the water velocity computer. These data points can be reviewed on the computer screen for later analysis. The water velocity computer has a water-resistant housing and incorporates a unique four-button operation for changing functions and resetting the display. The water velocity computer is powered by a non-replaceable battery that will last approximately five years with normal use. Low battery warnings will also display as appropriate. Flow Probe HandleThe Flow Probe handle can telescope from 3.7 feet to 6 feet in length (FP111), 5.5 feet to 15 feet (FP211), or 2.5 feet to 5.5 feet (FP311). The handle is constructed of anodised aluminum for light weight and long life. The 15 foot length of the FP211, Flow Probe, allows for measuring sewer flows from street level and measuring stream flows from low bridges. While the 2.5 foot collapsed length of the FP311, Flow Probe is ideal for carrying into remote flow monitoring areas. A 3-foot (1.7-feet for the FP311) mylar coated staff gauge (graduated in hundredths of a foot and centimeters) is attached to the lower section of the water velocity probe for instant water depth measurements and accurate propeller positioning. True Velocity AveragingThe Flow Probe can be used to measure the true average water velocity of a channel’s flow. As long as the turbo-prop sensor is in the water flow, the computer will average the water velocity. One reading is taken per second, and a continuous average water velocity is displayed. To obtain the true average velocity the flow probe should be slowly moved throughout the cross sectional area being measured. Once the reading becomes steady, the true average water velocity of the cross sectional area is obtained. This allows for highly accurate flow measurements, which average the differences in velocities that occur throughout a flow’s cross-section and with water surges over time. The average water velocity can be saved by pressing the SAVE button and reviewed later.
    ...more
    www
  • Articulating Probe System

    Articulating Probe System

    Get Price Quote

    • PurityEnables to reach virtually all angles via numerous positions, , Compact and multisensor configurations .
    • ApplicationIndustrial
    • Brand NameZEISS
    • Number Of FlowerArticulating Probe System
    • Power SourceElectric
    • Position Increments2.5 Degrees
    ...more
  • Lever Probes

    Lever Probes

    Get Price Quote

    • Hysteresis0,1
    • Electronic Length Measuring Equipment Lever Probes:Product Name: GT31 lever probes ± 0,3 mm, 0,7 mm measuring travel, inclinable lever.Description: GT 31 lever probe ± 0,3mm.
    ...more
  • GAITSU Magnetic Probe +2

    GAITSU Magnetic Probe

    Get Price Quote

    • Brand NameGaitsu
    • MaterialStainless Steel
    • Country of OriginBangalore  
    • BenefitsEasy to clean, Simple to use, Removes micron sized contaminants
    • Ideal forCarrying out inspection on any powder, granulate or liquids for ferrous & paramagnetic contamination
    • Temprature80 deegree
    • Size100,200,300 mm
    • GAITSU Magnetic Probe is a high intensity magnetic sampling probe that is ideal for carrying out inspection on any powder, granulate or liquids for ferrous and paramagnetic contamination. Also, it can be used for sample inspection of product at inward goods and at critical control points throughout the process line for batch testing. The Magnetic Probe that we offer is manufactured using stainless steel 304 that adds durability to it. It can work under temperature 80oC. We make available Magnetic Probe in different sizes such as 100, 200 and 300 mm.   Benefits : Easy to clean Simple to use Removes micron sized contaminants
    ...more
  • Rfet Probes

    Rfet Probes

    Get Price Quote

    The remote field probes are equipped with a preamplifier and feature enhanced wear resistance, a thicker casing, improved differential response, and better signal-to-noise ratio (SNR). Designed for detecting irregularities likepitting, corrosion, and erosion in ferromagnetic tubing, these probes are available in below mentioned configurations. Single Exciter ProbesFeatures:Features a robust 32 dBpreamplifier for enhanced signal clarity.Upgraded casing with increasedthickness for superior wear resistance.Optimized differential response for improved accuracy.Effectively detects defects like pitting, corrosion, and erosion in ferromagnetic tubing.  Dual Exciter ProbesFeatures:Integrated 32 dB preamplifier for enhanced signal amplification.Selectable single or dual exciter operation via the software interface.Optimized differential response and superior signal-to-noise ratio.Improved sensitivity to pitting when using dual exciter mode.Enhanced detection of irregularities near the support plate. 
    ...more
  • Test Probes

    Test Probes

    Get Price Quote

    • MaterialPVC
    • Length0-6 Inches, 6-12 Inches
    • ApplicationDiagnostic Centre, Hospital
    • Packaging TypeBox, Carton
    • Temperature Range-50- +50 Deg C, 100-200 Deg C, 200-400 Deg C, 50-100 Deg C
    • FeatureEasier Installation, Quality Approved, Smooth Performance
    • Total Carbohydrate1 Yr, 2 Yrs, 5 Yrs
    • We are the main supplier of this product.
  • Rigid Test Probe

    Rigid Test Probe

    Get Price Quote

    We are offering rigid test probe. reference standard:iec60035 application: a "rigid" version of the international test finger, model tfp-01, (see next page). Used for force applications on openings (i.e. Vents) as required by iec60335, en, ul1244 and csa standards. Handle made of plastic, rigid finger made of chrome plated steel. technical parameter: nodular finger length: 80 mm nodulal finger diameter: 12mm dam-board length: 100mm dam-board diameter: 50mm dam-board thickness: 20mm
    ...more
  • ACCESSIBILITY TEST PROBES

    ACCESSIBILITY TEST PROBES

    Get Price Quote

    Unjointed Finger Probe   This Probe is made for forceful insertion where the flexibility of the Jointed Finger Probe would be an obstruction. The handle is designed with a threaded hole for use with force gauges. To verify protection of persons against access to hazardous  live parts of hazardous mechanical parts, these are used.   Ball Accessibility Probe with Handle   The 50 mm. Impact Ball with Handle is used to test as per IEC 60529 Standard for protection against access to hazardous parts. Ball is made of chrome-plated hardened steel, and the rest is made of polyamide. It is for impact and access testing.   Test Pin Probe, 15 mm. Long   The Test Pin Probe is used to test for accessibility of small objects and meets IEC, CSA and UL requirements. The probe is made of stainless steel with an insulated handle as per IEC 60950 and 61032 Standards.   Test Rod Probes   The ball on all models is 35mm in diameter. All probe gauges are used for measuring the protection against access to hazardous parts. The rod is made of stainless steel and the stop face and handle are made of plolyamide. Handles are threaded to accept a force gauge.   Unregulated Power Source An Unregulated power source with current limiting circuit, Digital Voltmeter and fault indicator to be used with few test probes as per the standards test requirements
    ...more
  • Bifurcated Probe

    Bifurcated Probe

    104,000 / Unit

    • MOQ1 Piece
    • MaterialStainless Steel
    • Robustgreat for field and industrial use
    • ConnectorsSMA 905
    • TransmissionOptions for UV-Visible, Vis-NIR assemblies
    ...more
  • Coaxial Probe

    Coaxial Probe

    399 / Piece

    • MOQ100 Piece
    • Country of OriginIndia
    • Number Of FlowerCoaxial
    • MaterialMild Steel
    • CertificationISI Certified
    • ApplicationIndustrial
    • Packaging TypeGolden
    • Frequency2 MHz
    ...more
  • BETA-GAMMA Detector probe

    BETA-GAMMA Detector probe

    Get Price Quote

    • EfficiencyBetter than 5% with Beta Source (with Sr-90; Yt-90).
    • This probe is offered as a part of Beta-Gamma Radiation Survey Meter type RM703E. This uses a thin walled GM tube which is housed in a cylindrical shell made of Stainless steel. Detector probe has ‘cable gland’ arrangement with cable length being 1.0 meters. There is a rotating shutter arrangement made of SS shell, which is kept open for Beta measurement.
    ...more
  • SS Test Probe

    SS Test Probe

    6,000 / Piece

    • Country of OriginMade in India
    • MaterialStainless Steel
    • Length3"
    • Finish TypeChrome
    • Pack TypeBox
    ...more
  • Jointed Test Finger Probe +1

    Jointed Test Finger Probe

    14,500 / Piece

    • MOQ1 Piece(s)
    • Number Of FlowerTest Probes
    • MaterialPVC, Stainless Steel
    • ApplicationInstrument Testing
    • Test Finger TypeIP 2X Jointed Test Finger
    • Finger Diameter12 mm
    • Finger MaterialS.S. 304
    • Handle MaterialPP
    • QualityOptimum Quality
    • UsageFor Testing
    • This is the "International" test finger required by most IEC61032 test probe B, EN and CSA Standards, in addition to many UL Standards. The handle are made of P.P . Finger is made of stainless steel. All parts precision machined.
    ...more
  • Testing Probe

    Testing Probe

    1 / Piece

    • MaterialBrass,Aluminium, Metal alloy
    • FeatureQuality Tasted, High strength
    • UsageInstrument Testing
    • Line Width0-5Mm, 5-10Mm
    • CertificationISO Certified, 9001: 2008
    ...more
  • Test Probes

    Test Probes

    Get Price Quote

    We are offering different types of probes are available for nerve root, murphy ball tip probes and foraminal ball tip probe. They are manufactured with a smooth finish for easy finish and glide. The slight matted finish also prevents glare thus serving easy overall procedure during surgery.
    ...more
  • AFM Cantilevers for AFM-SPM

    AFM Cantilevers for AFM-SPM

    Get Price Quote

    • Colorwhite
    • ResolutionAtomic
    • Usageused to map surface topography, roughness
  • datron renishaw nc4-f115 test probe

    datron renishaw nc4-f115 test probe

    Get Price Quote

    • Number Of FlowerLaser Module
    • UsageTool Measurement And Breakage Detection On Turning Tool
    • FeaturesFast, Precise, Automatic, Contact-free Tool Measurement
    • Measurement Times ReductionUp To 90%
    • Reliable ManufacturingFully Automatic Location
    • SizeCompact
    • Compact laser module with integrated transmitter and receiver. Fast, precise and automatic, contact-free tool measurement and breakage detection on turning tool.The times for tool measurement can be reduced by up to 90%. The automatic tool breakage control ensures reliable manufacturing in fully automatic location.
    ...more
  • Electronic Probe

    Electronic Probe

    Get Price Quote

    • ApplicationUniversal
    • CategoriesELECTRONIC GAUGES, Electronic Probe
    • Measuring travel± 0.4 mm
    • Total travel1 mm
    • Linearity± 0.5% (of total measuring range)
    • Repeatability0.15 μm
    • Measuring force0.8 N
    • Pre-travelFixed
    • Environmental Protection (IEC 529)IP 64
    • Plunger guidePreloaded, caged linear ball bearing
    • Cable2 m., Polyurethane.
    • Cable support springN.A.
    • Connecting adaptor5–pin, Male DIN plug (240°)
    • Total length (with support spring)50
    • Probe bodyHardened and ground stainless steel (55HRC); Diameter 5h6
    • Reference temperature20°C
    • Contact tipTungsten carbide ball 4 mm Dia, M2 Thread.
    • Sealing bellowViton  
    ...more
  • Test Probe

    Test Probe

    Get Price Quote

    • Number Of FlowerTest Probes
    • ApplicationInstrument Testing
    • FeatureQuality Approved, Smooth Performance
    • Total Carbohydrate1 Yr
    • Standard Wire Length1 Metre
    • Test probe4mm
    ...more
  • Testing and Measuring Probes

    Testing and Measuring Probes

    9,775 / Piece

    • Country of OriginMax 10 kV
    • MaterialStainless Steel
    • BrandPB Statclean
    • Weight2.27 kg (5 Pound)
    • Power Supply Battery9 Volt Battery
    ...more
  • Precision High Current Test Pogo Pin

    Precision High Current Test Pogo Pin

    Get Price Quote

    • Country of OriginGuangdong, China (Mainland)
    • ModelPG-130122-P01
    • NamePogo Pin
    • Supply Ability10000 Piece/Pieces per Day
  • Ultrasonic Testing Accessories Probes

    Ultrasonic Testing Accessories Probes

    Get Price Quote

    Magworld is a leading Manufacturer, Supplier and Exporter of varied range of NDT products, having a wide national and global business network with the objective of providing NDT Products & Services with the level of quality, reliability and integrity demanded by various industries that rely on Non Destructive Testing methods. We are located in Hyderabad, Telanagana.
    ...more
Filter by City
top