Gasifier Dealers

Biomass Gasifier specially developed for industrial heating applications having a heat output of 12,50,000 KcalHr. Suited for Boilers, Rotary melting furnaces etc.,

Agricultural activities generate large amounts of biomass residues. Crop residue, traditionally considered as “ trash’or agricultural waste, is increasingly being viewd as a valuable resources. Corn stalks, corn cobs, wheat staw, and other leftovers from grain production can be used as feedstock in our biomass gasifier system.

We offer coal gasifier. Case coal gasifier works on the principle of partial combustion of coal thus producing primarily carbon mono oxide called producer gas. We guarantee for optimum design, manufacturing and performance. We have successfully installed over 200 gasifiers in steel industry. The application being majorly for reheating furnaces for rolling mills. We have successfully replaced fuels previously used like furnace oil, pulverised coal, direct fed coal, propane etc.

We are offering Biomass Gasifier. Biomass Gasifier is an excellen Solution for Community Cooking. It Works on firewood and Briquettes with thermal Efficiency in the range of 40-50 %. Smoke only at start, just for 5-10 minutes. Once clean flame is achieved, it can be run for any number of hours without constant attention, so more time for other activities. It can be used for Roti making, Boiling, Frying etc. Minimum Maintenance i.e cleaning of tar from gas pipe once in 2-3 months. Available in two burners design also. Payback period is approx.500 hours(2-6 months). Life is approximately 10 years. As Briquettes are made from waste biomass; hence it helps for waste management too. Thermal Efficiency in the range of 40-50 % Smoke only at start, just for 5-10 minutes Used for Roti making, Boiling, Frying etc. Minimum Maintenance Payback period is approx.500 hours(2-6 months) Life is approximately 10 years

Gasifier structure: wholly water-jacketed structure, self-produced steam with a pressure of 49 Kpa can be used as gasifying agent and steam seal for probing fire. Feeding mechanism: bucket hoisting and manual double bell jar feeding mechanism is adopted which is easy to operate and can prevent gas leakage efficiently. Slag discharge mechanism: wet slag discharge is made from both sides with ratchet wheel and detent of hydraulic drive. This gasifier has advanges of easy operation, steady production, convenient adjustment and reliable running. 

Cooking gasifier is an alternate for diesel bhatty and lpg cooking. Convenient and occupy little space. Can replace lpg upto 4 kgshr or diesel upto 5 ltrshr. Save fuel cost by 50% compared to diesellpg.

We are offering thermal gasifiers. Biomass gasification technology is an eco-friendly alternate energy source that can help organizations gain a competitive advantage. In fact, gasification is the cleanest, most efficient combustion method known. Biomass gasification is the process of conversion of solid biomass into gaseous form. In simple terms, this uses the easily available biomass and converts it into energy.

In updraft gasifiers, gas is drawn out of the gasifier from the top of the fuel bed while the gasification reactions take place near the bottom. As the producer gas passes through the fuel bed, it picks-up volatile matter (tars) and moisture from the fuel. Therefore, the gas from the updraft gasifier contains condensable volatiles. The design and operation of the gasifiers is such that the gas comes out at 200-400 C temperature. At this temperature, most of the volatile hydrocarbons are in vapor form, which add to the energy content of the gas.

It is a continuous which operates on DC power supply mode it's a big size downdraft gasifier stove used in commercial kitchens, schools, etc. and available in customized form i.e. (single, double or more burners). ⇒ 25D (For 100-200 People)

Most biomass materials like Wood , Charcoal , Rice Husk etc can be converted into a gaseous fuel known as producer gas, which comprises carbon monoxide, hydrogen, carbon dioxide, methane, and nitrogen. This gas has a lower calorific value (1000–1200 kcalnm3) compared to natural gas or liquefied petroleum gas, but can be burnt directly with high efficiency and good degree of control without emitting smoke. The producer gas flame temperature can be as high as 1100 oC. Each kilogram of air-dry biomass (10% moisture content) yields about 2.5 nm3 of producer gas. In energy terms, the conversion efficiency of the biomass gasifier process is in the range of 80%–90%.

Nath Motors provides clean energy generation through biomass gasification.Biomass Gasifier is a thermo-chemical reactor where Biomass gasification takes place which is a conversion of solid fuels(Wood & Agricultural waste etc) into a combustible gas mixture normally called "Producer gas".Due to rapid industrialization and the burning of fossil fuels all over the world lead to emission of CO2. Contributes 50% of green gas emission One of the remedies to limit the rising content of CO 2 in the atmosphere is energetic use of biomass fuel. Biomass is basically an organic material, which includes wood, crop residues, solid waste, animal wastes, sewage, and waste from food processing. Biomass is Your browser may not support display of this image. made up of mainly carbon and hydrogen.    Advantage GasificationIn this process, biomass is converted into a mixture of gases through a thermo-chemical reaction called producer gas consisting of combustible gases mainly hydrogen, carbon mono oxide and methane, non-combustible gases nitrogen, carbon dioxide and water vapor. The essence of gasification process is the conversion of solid carbon fuels into carbon monoxide by thermo chemical process. The gasification of solid fuel is accomplished in air sealed, closed chamber, under slight suction or pressure relative to ambient pressure This technology enables you to directly treat Green Wood / Biomass having moisture content of 10-15% without using a drying process. Biomass gasification is completed in many stages that elaborated and explained with a flow diagram given below    Drying : Biomass fuels consist of moisture ranging from 5 to 35%. At the temperature above 100 o C, the water is removed and converted into steam. In the drying, fuels do not experience any kind of decomposition. Pyrolysis : Pyrolysis is the thermal decomposition of biomass fuels in the absence of oxygen. Pyrolysis involves release of three kinds of products such as solid, liquid and gases. The ratio of products is influenced by the chemical composition of biomass fuels and the operating conditions. The heating value of gas produced during the pyrolysis process is low (3.5 - 8.9 MJ/m 3 ). It is noted that no matter how gasifier is built, there will always be a low temperature zone, where pyrolysis takes place, generating condensable hydrocarbon. Oxidation : Introduced air in the oxidation zone contains, besides oxygen and water vapors, inert gases such as nitrogen and argon. These inert gases are considered to be non-reactive with fuel constituents. The oxidation takes place at the temperature of 700-2000oc. Heterogeneous reaction takes place between oxygen in the air and solid carbonized fuel, producing carbon monoxide. Plus and minus sign indicate the release and supply of heat energy during the process respectively C + O 2 = CO 2 + 406 [ MJ/kmol] In reaction 12.01 kg of carbon is completely combusted with 22.39 m3 of oxygen supplied by air blast to yield 22.26 m 3 of carbon dioxide and 393.8 MJ of heat. Hydrogen in fuel reacts with oxygen in the air blast, producing steam . H 2 + ½ O 2 = H 2 O + 242 [ MJ/kmol] Reduction In reduction zone, a number of high temperature chemical reactions take place in the absence of oxygen. The principal reactions that takes place in reduction are mentioned below. Boudouard reaction - CO 2 + C = 2CO - 172.6 [MJ/kmol] Water-gas reaction - C + H2 O = CO + H 2 - 131.4 [MJ/kmol]Water shift reaction - CO 2 + H 2 = CO + H 2 O + 41.2 [MJ/kmol]Methane production reaction - C + 2H 2 = CH 4 + 75 [MJ/kmol] From above thermo-chemical reaction it may be understood that heat generated in pyrolysis is absorbed in reduction process. Hence, the temperature of gas which is very high in the beginning goes down as it passes through various stages. If complete gasification takes place, all the carbon is burned or reduced to carbon monoxide, a combustible gas and some other mineral matter is vaporized. The remains are ash and some char (unburned carbon).  Advantage Gasification It saves upto 73% of fuel cost when compared to conventional fuel options Low initial investment and cost of power production Applied over a range of output ratings (5KWe to 2Mwe) with flexuble process control Range of ApplicationsPower Generation: Round the clock Power Generation Pumping and Irrigation Village electrification Captive power(industries) Grid -fed power from energy plant installed on wastelands Thermal Applications Hot Air Generators Dryers Boilers Thermic Fluid Heaters Ovens Furnaces & Kilns Gasification for Energy Supply Rural areas in the developing countries India are characterized by disperse population and a lack of infrastructure. Energy is the basic mean in improving the living standard and productivity. Energy is required in household for lighting and running electrical apparatus such as TV and Radio. Energy is also demanded in agriculture for operating irrigation pumps and other machinery such as thresher.

CASE CFBC Gasification is presently rated as the most economical, environmental friendly, operational ease and latest technology in coal gasification. in this technology, coal fines (

It is a product which is used for drying any type of Biomass Dryer material, such as, wood, wood-waste, corn wastes, coconut shell, rice husks, agriculture residue, etc. The purpose of this dryer is to reduce moisture content of the biomass material to a minimum level, so as enable the cleaner, efficient and controlled combustion of the biomass with high calorific value, when fed into the Gasifier for the gasification process.

We provide our clients with good quality Biomass Gasifier. It undertakes the process of converting solid biomass fuel into combustible gas through thermo-chemical reactions. It is efficient for biomass gasification process and is highly reliable for their working. Use The gas produced is low heating value fuel; possessing calorific value of 1000-1200 Kcal/Nm3. 1 kg of air-dried biomass produces 2.5-3 Nm3 of gas through gasification. Gas Composition Carbon monoxide -20-22%Hydrogen (H2O)-15-20%Methane(CH4)-2-3%Carbon dioxide (CO2)-9-11%Nitrogen(N2)-45-54%Water vapor (H2O)-10-15%Heavy hydrocarbon-0.2-0.4%  Used In OvensBoilersKilnsHot air generatorThermic fluid heaters for thermal applications Features Appropriate designGood conversion efficiencyBetter control on burningProduction of clean flue gases in the exhaustLow investmentReduction in deforestationReduction in Diesel/Kerosene/Furnace Oil/ LDO costCapable of withstanding high temperatures up to 1860 degree centigradeNet zero CO2 emission

Biomass materials are used since millennia for meeting myriad human needs including energy. Main sources of biomass energy are trees, crops and animal waste. Among the biomass energy sources, wood fuels are the most prominent. Presently, the biomass sources contribute 14% of global energy and 38% of energy in developing countries. Biomass gasification has some better advantages over other alternative energy sources. The technology's conversion efficiency is high. It can be applied over a wide range of output metrics with only a small variation in overall efficiency and investment.

Damodar is associated with 'Ankur' Scientific Energy Technologies for marketing, installation and after sales services of Biomass Gasifier. Damodar also undertakes long term O&M contracts for these plants. Till date Damodar has installed more than 90 Gasifiers across the country.

These Biomass Gasifiers are power efficient and have the higher performance rate. Place an order with us for acquiring top-of-the-line quality Biomass Gasifier in retail or bulk. We are supported by a well-structured warehouse that assists us wholly in keeping the lot safe and meeting urgent requirements at a time. Also, we keep it updated on regular basis.