PIR Sensor Dealers

5 in 1 Stagnant Occupant Sensor, Bus Enabled, Energy Pilot, with Ultrasonic Cali ratable Distance sensor for occupancy, LUX, PIR, Security, and Energy Saving Distributed intelligence, for both automation and security use, (PIR Detection Angle = 110 Degrees, PIR Adjustable detection. Range 10 Meters diameter), (Ultrasonic Distance Adjustable 1-4 meters)

Walnut Innovations PIR Motion sensor Switch This PIR Motion Sensor is a new type of Energy-Saving light control switch. It works by detecting heat rays emitted by the human body. Auto switching of lights or other fixtures based on human occupancy in residential and commercial buildings. Security systems for triggering of Buzzers or switching on CameraDVR when human motion is detected. TECHNICAL DETAILS : Operating voltage: AC 220-250V 50Hz-60Hz Operating temperature: -20C~+50C PRODUCT INSTALLATION : 1. In order to achieve effective Sensing distance, please keep the switch 1.5 meters high from the ground. 2. The light, such as incandescent lamp which emits high heat should be kept from the switch, at least one meter 3.During installation first time, the switch' initialization will take 30-50 sec. It's natural for the switch to turn onoff voluntarily. 4. When you install the switch on daytime, adjusted to SUN (max), it will work day and night, & when adjusted to MOON (min) it will be work only in the ambient light less than 3LUX means work only in night time or in dark .

DESCRIPTION:- A PIR-based motion detector is used to sense movement of people, animals, or other objects. They are commonly used in burglar alarms and automatically-activated lighting systems. They are commonly called simply "PIR", or sometimes "PID", for "passive infrared detector".

PIR Sensor with Ceiling Lamp, Occupancy Sensors, Magic Light Sensors, Security Light Sensors, sell quality products that are cost effective (not cheap),

* The PIR detects human movement and temperature of monitored area.* When movement is detected the PIR Sensor will send a signal to the main unit triggering an alarm.* It has a long battery life and very easy to install and maintain.* Batteries can be changed within 1 min without any hassle of removing the covers and screws.  

A NEGAVEEZ PIR Occupancy Sensor offers security and convenience in the areas that they cover. Occupancy sensor is an intelligent device which detects IR Rays emitted by Human Being and controls the ON-OFF operation of electrical loads. Electrical Loads can be Lights, Fans, AC for Energy Saving Application or Siren, Buzzer, Feedback to Home Automation Controller along with Lights for Security Application. This highly sensitive Sensor Element detects human movement within its detection area and automatically turns the load ON. The Loads are kept ON till the Human Movement persists in the room. The Loads are turned OFF after preset time delay if no movement is detected within the set time It has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn ON artificial light only when the ambient light condition (LUX Level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient system along with security.   Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection DC 12 V/24 V versions are also available*** PIR Sensor: Highly Sensitive Quad Element Pyro Electric Sensor TIME Setting: Built in Re-triggerable Timer setting between 30 sec to 30 minutes from the last movement detection LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control of electrical loads during DAY Light, PARTIAL Light and NIGHT condition. Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load, For AC Control Use Additional Contactor of Suitable Rating Sensor warm-up time: 1 Minute Sensing angle: 360 degrees Sensing distance: 4-5 Meters Operating Temperature: -10oC to 50oC Protection class: IP25 Enclosure is protected from environmental conditions that are water and dust. EMI protection: Protection against electromagnetic interference noise caused by cell phones, TV, tuners, audio players. Over Current & Short Circuit Protection by an external replaceable fuse In built Protection circuit for lighting loads Provision for Dry Contact Output Terminal available RELAY- NO/NC/COMMON Contact available outside***

We are offering Outdoor Pir Motion Sensor. We are engaged in manufacturing and supplying superior quality Outdoor PIR Motion Sensor. The Outdoor PIR Motion Sensor offered by us possesses matchless features including excellent detection range, less power consumption, high range of ambient light, and various others. Widely appreciated for quality richness and hi-tech features, our Outdoor PIR Motion Sensor is extensively demanded for both residential as well as commercial establishments. Outdoor PIR Motion Sensor Specifications Power source : 220-240V/AC, 100-130V/ACRated load : 100W (max.)Detection distance : 8m (max.