Cyclone Separators Dealers

We are a well-reckoned Manufacturer and Supplier of Cyclone Separator in Maharashtra, India. Cyclonic separation is a method of removing particulates from the air, gas or liquid stream, without the use of filters, through vortex separation. Rotational effects and gravity are used to separate mixtures of solids and fluids. The method can also be used to separate fine droplets of liquid from a gaseous stream. Our deft professionals thoroughly examine it against the stringent quality parameters before forwarding it to our clients.

With the support of our advance infrastructural unit and diligent workforce, we are offering a customized assortment of Cyclone Separator to the clientele. Our Cyclone Separator is working smoothly with great capacity.

A high speed rotating (air)flow is established within a cylindrical or conical container called a cyclone. Air flows in a spiral pattern, beginning at the top (wide end) of the cyclone and ending at the bottom (narrow) end before exiting the cyclone in a straight stream through the center of the cyclone and out the top. Larger (denser) particles in the rotating stream have too much inertia to follow the tight curve of the stream and strike the outside wall, falling then to the bottom of the cyclone where they can beremoved. In a conical system, as the rotating flow moves towards the narrow end of the cyclone the rotational radius of the stream is reduced, separating smaller and smaller particles.   Applications General applications include: _ oil refineries to separate oils and gases _ cement industry _vacuum cleaners   Features Required: High efficiency over a broad flow range Flow-optimized design Low pressure drop resulting in energy savings High safety during operation under pressure Long-term corrosion protection    

Cyclone separators remove liquids, fine mists and solids from the compressed air.   Cost-efficient use of BOGE cyclone separators Directly downstream from the compressor   if no compressed air receiver is fitted if compressed air receiver is a long distance away if the compressed air pipeline rises vertically  Flow capacity: 2,20 - 65,63 m3/min

As a quality-oriented organization, we are focused to provide our clients an excellent quality cyclone separator. The offered cyclone separator is perfectly designed with using top grade factor input and advance technology. The offered cyclone separator is availed in different related specifications, in order to fulfill the spotted expectations of our dear client. Our given cyclone separator is rigorously tested by the expert’s team. Additionally, our customers can take this cyclone separator from us in modified options and at affordable rates. SPECIFICATION: As per the customers requirement APPLICATIONS: Cyclonic separator is used to remove particulates from an air, gas or liquid stream, without the use of filters, through vortex separation. It can be used in all kind of industries.

Gas Cyclone Technical Description One area of application of gas cyclones is the pre-filtration of solids from gases. Gas cyclones have no moving parts, and so are low-maintenance systems. They can also be used in conjunction with high gas temperatures. For these reasons they are in widespread use. This trainer was developed in cooperation with the Institute for Solids Process Engineering and Particle Technology at TU Hamburg-Harburg. A disperser is used to disperse the feed material (quartz powder recommended) finely in an airflow. The airflow laden with solid material (raw gas) in this way is fed tangentially into the cyclone at the top. In the cyclone, the airflow moves downwards as a rotating primary vortex. At the bottom of the cyclone the vortex is reversed. In the middle of the cyclone it moves as a secondary vortex back up towards the immersion tube, where the cleaned gas emerges from the cyclone. The main separation process takes place in the primary vortex. Owing to the centrifugal forces and the difference in density between the air and the solid, the coarse solid particles move towards the wall. They slide down the wall and are collected in a tank at the bottom of the cyclone. No complete separation of the entire solid material takes place. The fine particles which are smaller than the separation size are ideally discharged from the immersion tube at the top with the secondary vortex. This fine material is separated out of the air flow by a filter. The separation size defines the theoretical boundary between the fine and coarse material. The solid content of the raw gas can be adjusted by means of the disperser and an airflow control valve. To prevent loading of the airflow with particles upstream of the disperser, the drawn-in room air is filtered. An air suction fan generates the airflow. Pressure measurement points at the relevant positions in the trainer enable to determine the pressure loss. For particle size analyses of the feed and the coarse material, a balance and a screening machine are recommended.

Cyclone Separators   • Cyclone separator is used for collection of coarse dust particles • We are manufacturer of the efficient and durable cyclones • Product ranges from adequate to coarse dust content gas (100 to 100,000 fts/min) • Due to whirling motion gases & dust particles are separated • Cyclone separator used for control of coarse dust of high concentration • Multi cyclones are also provided • Our cyclones have high collecting efficiency

They are contraptions that makes use of centrifugal forces along with tiny quantities of pressure by way of a turning movement to divide dust particles into categories. The entire process of the cyclone and how the separators function is quite interesting. The selected substance is pushed at elevated levels into the pipe entering the device. The robust form of the filter makes the incoming substance spin into a vortex. Bigger more textured particles are swept towards the outer barriers of the cyclone. Then it is spun in the air as heavy particles are pushed into another section. The thinner particles are released at the top. The process taken by the model uses a constant flow.