Audio and Video Amplifiers Dealers

Preferably as a supplement for components with a wideband terrestrial input. • Ground clamp. • Protection class IP 20. Miscellaneous: • The devices are supplied with an energy - saving switched- mode power supply.

headphone amplifier 120V Rail headphone amplifier, preamplifier and monitor controller For all headphones with impedances >10Ohms (>40Ohms for balanced headphones) Innovative Phonitor Matrix: speaker-equivalent listening on headphones Laterality control: super-fine balance control Solo LR, Polarity ø LR, MonoStereo Volume remotely adjustable (learns any IR remote control) Maximum output power: 2 x 2W (1kHz300Ohm) Frequency response: 4Hz - 480kHz (-3dB) THD+N: 0.00091% (HP), 0.00085% (Line) Dynamic range: 133.62dB (HP), 134.37dB (Line)

Product Name Fiber Sensor Amplifier Part No FX-410 Series Brand Name panasonic Description Digital Dual Display Manual Setting Type

Features Great for personal conversations or small groups More compact than other waistband amplifiers Conveniently straps around your waist, or slings over the shoulder Filters out unwanted sound Improves perceived voice quality For use with a headset microphone (included) Built in Li battery (included) Technical Specifications Microphone : 1 x Gooseneck Mike , 1 x Handheld Cordless mike , 1 x Cordless Collar Mike, 1 x Headphone Mike Amplifier : Built- In Audio System consisting of Wireless Speaker , Wireless Microphone, Built-in Amplifier. USB/SD Card Slot for MP3 Audio .Built-in FM Radio.Built-in Battery back (Rechargeable) Speaker Power : 60W Loudspeaker : One Full Range 4 Ohm 6.5” Speaker Channel :Dual Channel Frequency range : VHF 165-256 MHz ( 98 group of option ) Sensitivity : 10Db u V (S/N:> 60Db above) Oscillating Mode : 0.005% Quartz oscillating locked. Service Range : 35 Meters Inputs : AUX x 1Output , AUX x 1Input, 6.5mm Wired Microphone Input x 23.5mm Wired Microphone Inputx1 LED Indicator : Power,DC 12V LED, DC8.4V, RF1/RF2,Mode,USB,SD,Play, Stereo.

We are offering Tower Mount Amplifier (TMA) Main characteristics •Single or double units for easy use with XPol antennas •Designed to support CWA, AISG 1.1 and AISG 2.0 •Gain Setting switchable from low level (default) to High level •Suitable for antenna RET control according to AISG/3GPP Standard Features •Built-in lightning protection •Low passive inter-modulation •Temperature stable performance •Redundant design LNA Attributes •Low Noise Figure design to be integrated in TMA •Flexible design to accommodate irregular shapes •Bias Via RF coax •By-pass mode switching •Selectable gain •Stable design.

Signal Force amplifiers, or shaker amplifiers, provide very high levels of efficiency with superior levels of performance. These amplifiers occupy little space and are suitable for driving shakers from all manufacturers, as well as other laboratory applications. While new shaker systems include matched amplifiers, Data Physics engineers can match our modern power amplifiers to any electrodynamic shaker. EMC has been a major factor in the design of the digital switching amplifiers. Full use has been made of Faraday cages, compartmentalization, filtered interconnections, segmented wiring, common mode chokes for symmetrical currents, mains filters, optical coupling of signals and screened cables. All amplifiers are also available CE marked. Linear amplifiers are available from 30 to 1000 VA and digital switching amplifiers are available from 1 kVA to 470 kVA. Switching amplifiers are used for medium and large shakers and are commonly replaced on very old shakers. Switching Amplifier Features: Up to 95% efficient Switches at >105 kHz 1 KVA, 5 KVA, and 10 KVA modules Includes field and degaussing supplies Safety interlocks Protection against over current and over temperature Remote and chamber interfaces

25mm neodymium soft dome tweeter. ATC hand built 3˝75mm soft dome mid driver. ATC hand built 7˝164mm carbon-paper cone bass driver. On-board grounded source 235W class AB 3-way amplifier. Compact size with high output and low cut-off frequency. 19˝ rack mountable. 6 year warranty

The SynAmps 2/RT is one of the most advanced and versa­tile ampli­fier, capa­ble of record­ing true DC poten­tials contained in cogni­tive poten­tials to the fastest ABRs.The SynAmps 2/RT is seam­lessly compat­i­ble with all of our other systems. This ampli­fier was designed with specific engi­neer­ing consid­er­a­tions to provide the best possi­ble record­ings in the MRI. The SynAmps 2/RT uses the same trig­ger connec­tor that the orig­i­nal SynAmps and NuAmps use, so there is no need to modify your exist­ing stim­u­lus protocols. • Each chan­nel has a dedi­cated 24 bit A-to-D converter, allow­ing high signal fidelity with low gain and a broad dynamic range. • The SynAmps 2/RT is a true DC ampli­fier, allow­ing acqui­si­tion of slow poten­tials with no high pass filtering. • Sampling rates up to 20,000Hz (synchro­nized across all chan­nels) all acqui­si­tion of activ­ity such as ABRs (maxi­mum low pass filter is 3500Hz). • Combine up to 4 head­boxes with a single system unit, creat­ing a 256 chan­nel system. • Exter­nal control of the ampli­fier clocks allows synchro­niza­tion of multi­ple system units, facil­i­tat­ing super-high density system up to 512 channels. • Exter­nal clock control also allows synchro­niza­tion with MRI scan­ner clocks allow­ing precise reduc­tion of gradi­ent arti­fact, with­out the need for fast sampling rates. • Active noise cancel­la­tion ensures accu­rate record­ings even in the most hostile elec­tro­mag­netic environments. • De-blocking Circuitry facil­i­tates record­ing of EEG during TMS and other high inten­sity stim­u­lati­on with­out compro­mis­ing the integrity of the data. • Input imped­ance of 10 GOhm. • Common Mode Rejec­tion Ratio of 110 dB.

We offer DPA-K Switching Power Amplifiers. Designed for use with water-cooled electrodynamic shakers, DPA-K amplifiers offer a maximum power output of 280kVA, providing optimum performance for your vibration test system and featuring economy mode and low harmonic distortion.