A complete program of wire electrodes and filler wire/rods for welding of austenitic stainess steels, duplex stainless steels and nickel alloys. For most Sandvik welding wire standard grades there are variants with both normal and high silicon content to suit different welding methods.
A complete program of wire electrodes and filler wire/rods for welding of austenitic stainess steels, duplex stainless steels and nickel alloys. For most Sandvik welding wire standard grades there are variants with both normal and high silicon content to suit different welding methods.
Welding flux for a variety of welding methods and a wide range of applications.
The Sandvik program includes flux for:
Submerged arc welding (SAW)
Electroslag welding (ESW)
Joining of plates with wire electrodes
Stainless steel, high-alloy steels and nickel alloys
Previous designation Material Safety Data Sheets (MSDS)
When choosing a welding flux for a given combination of strip/wire electrode and parent metal, the welding parameters also have to be considered to obtain the desired composition of the weld metal.
Welding flux for a variety of welding methods and a wide range of applications.
The Sandvik program includes flux for:
Submerged arc welding (SAW)
Electroslag welding (ESW)
Joining of plates with wire electrodes
Stainless steel, high-alloy steels and nickel alloys
Previous designation Material Safety Data Sheets (MSDS)
When choosing a welding flux for a given combination of strip/wire electrode and parent metal, the welding parameters also have to be considered to obtain the desired composition of the weld metal.
The new TransSteel 2500 Compact MIG/MAG multivoltage power source has been designed as the perfect answer to the needs of the steel market: it boasts a compact and robust construction, 250 amperes, wire diameter of up to 1.2 mm, proven Steel Transfer Technology inside and is EN 1090-compliant.
The TransSteel 2500 is capable of running on either 3 phase power or single phase. A welding torch specially developed for this power category, a power limitation function and a wirespool viewing window complete the package.
The new TransSteel 2500 Compact MIG/MAG multivoltage power source has been designed as the perfect answer to the needs of the steel market: it boasts a compact and robust construction, 250 amperes, wire diameter of up to 1.2 mm, proven Steel Transfer Technology inside and is EN 1090-compliant.
The TransSteel 2500 is capable of running on either 3 phase power or single phase. A welding torch specially developed for this power category, a power limitation function and a wirespool viewing window complete the package.
The fully digitised and microprocessor-controlled MIG/MAG power source for short circuit, spray and pulsed arcs enables the best weld properties in every respect, and reproducible results time and time again. With an output of 500 A, the TransPuls Synergic 5000 meets the highest demands of the automobile and component supply industry, equipment construction, chemical plant construction, machine and tracked vehicle manufacturing, and in shipyards. The multiprocess power source is suitable for MIG/MAG, TIG and electrode welding, as well as manual or robotic applications.
The fully digitised and microprocessor-controlled MIG/MAG power source for short circuit, spray and pulsed arcs enables the best weld properties in every respect, and reproducible results time and time again. With an output of 500 A, the TransPuls Synergic 5000 meets the highest demands of the automobile and component supply industry, equipment construction, chemical plant construction, machine and tracked vehicle manufacturing, and in shipyards. The multiprocess power source is suitable for MIG/MAG, TIG and electrode welding, as well as manual or robotic applications.
The Fronius TransPocket 2500 is a fully digitally controlled manual electrode power source with resonant intelligence. The ideal characteristic ensures the arc is always stable, even for example at mains voltages of up to 100 metres, or with fluctuating mains voltages (340 to 506 V) and during generator operation.
The Fronius TransPocket 2500 is a fully digitally controlled manual electrode power source with resonant intelligence. The ideal characteristic ensures the arc is always stable, even for example at mains voltages of up to 100 metres, or with fluctuating mains voltages (340 to 506 V) and during generator operation.
TIME 5000 Digital, a digitised high-performance welding process with all the associated benefits: 100 % reproducible welding results, modular system principle, digital microprocessor control and outstanding weld properties.
TIME 5000 Digital, a digitised high-performance welding process with all the associated benefits: 100 % reproducible welding results, modular system principle, digital microprocessor control and outstanding weld properties.
Sandvik’s root flux is used for root protection when joining tubes and pipes where it is impractical to use a shielding gas or access is limited. However, the root flux does not give the same degree of protection. It can, therefore, only be used when the parent metal has enough margin of corrosion resistance for the actual application.
The use of root flux reduces the risk of porosity, surface oxides and burn through and is always better than no root protection.
Root flux is a powder, which is mixed with water or methanol to form a paste. It is brushed on to the root side, about 20 mm (0.787 in.) on each side of the joint. During welding the paste reacts with the heat of welding, forming a thin protective slag.
The slag is washed away by the process medium when the pipe is taken into service.
The root flux, which can be used for root passes made by the MMA, TIG or MIG welding methods, is available in plastic bottles containing 0.5 kg (1.1 lbs), sufficient for about 50 m (164 ft) of root weld.
Sandvik’s root flux is used for root protection when joining tubes and pipes where it is impractical to use a shielding gas or access is limited. However, the root flux does not give the same degree of protection. It can, therefore, only be used when the parent metal has enough margin of corrosion resistance for the actual application.
The use of root flux reduces the risk of porosity, surface oxides and burn through and is always better than no root protection.
Root flux is a powder, which is mixed with water or methanol to form a paste. It is brushed on to the root side, about 20 mm (0.787 in.) on each side of the joint. During welding the paste reacts with the heat of welding, forming a thin protective slag.
The slag is washed away by the process medium when the pipe is taken into service.
The root flux, which can be used for root passes made by the MMA, TIG or MIG welding methods, is available in plastic bottles containing 0.5 kg (1.1 lbs), sufficient for about 50 m (164 ft) of root weld.
The Fronius TransTig 2200 is a TIG-DC power source, and has an output of 220 A. It is both light and robust, self-explanatory in operation, completely digitised and delivers maximum power from a 230 V mains. The power source is also ideally suited to chemical, container, machine and plant construction, installation firms, metal construction, maintenance and repair companies, and for pipeline construction
The Fronius TransTig 2200 is a TIG-DC power source, and has an output of 220 A. It is both light and robust, self-explanatory in operation, completely digitised and delivers maximum power from a 230 V mains. The power source is also ideally suited to chemical, container, machine and plant construction, installation firms, metal construction, maintenance and repair companies, and for pipeline construction
The Fronius MagicWave 5000 is a fully digitally controlled TIG AC/DC power source with ActiveWave technology, and is characterised by the softest possible yet highly stable arc. It has an output of 500 A, is both light and robust and self-explanatory in operation. The power source can be used in many different fields: chemical, container, machine and plant construction, pipeline construction, automotive and tracked vehicle manufacturing, aerospace industry and shipbuilding, as well as by all types of installation, maintenance and repair companies.
The Fronius MagicWave 5000 is a fully digitally controlled TIG AC/DC power source with ActiveWave technology, and is characterised by the softest possible yet highly stable arc. It has an output of 500 A, is both light and robust and self-explanatory in operation. The power source can be used in many different fields: chemical, container, machine and plant construction, pipeline construction, automotive and tracked vehicle manufacturing, aerospace industry and shipbuilding, as well as by all types of installation, maintenance and repair companies.
Sandvik’s flux cored wire electrodes are of rutile type and have an austenitic stainless steel sheath. They are available in a variety of grades and sizes for flat, horizontal and all-position welding.
Previous designation Material Safety Data Sheets (MSDS)
Sandvik’s flux cored wire electrodes are of rutile type and have an austenitic stainless steel sheath. They are available in a variety of grades and sizes for flat, horizontal and all-position welding.
Previous designation Material Safety Data Sheets (MSDS)
Covered electrodes of rutile and basic type for manual metal arc (MMA)/SMAW welding. Sandvik’s large range of covered electrodes includes electrodes for welding stainless steels, duplex stainless steels and nickel alloys.
Most grades of Sandvik’s covered electrodes are approved by internationally recognized organizations such as CE, TÜV, DNV, CWB and DB.
Covered electrodes of rutile and basic type for manual metal arc (MMA)/SMAW welding. Sandvik’s large range of covered electrodes includes electrodes for welding stainless steels, duplex stainless steels and nickel alloys.
Most grades of Sandvik’s covered electrodes are approved by internationally recognized organizations such as CE, TÜV, DNV, CWB and DB.
Reviews & Ratings
Write a Review
Post Free Ad
