Heat Exchangers Dealers in Guindy, Chennai (31 products available)

The contact point inside plate gap is almost negligible. The plates contour move in parallel with each other and do not meet. This unit is unit in fluids, where either Viscosity is very high or % solid and fibrous material is very high. Free flow nature of plate help in passing of fibrous and highly viscous material without hindrance. The plates finish confirms to 3A standards. Plate gap range from 5 mm to 12 mm – all throughout - Free flow. The gasket material used are Nitrile rubber, EPDM The plate material used, SS316 etc. The PHE size in this range varies from 4” connection size to a maximum of 14” connection

As one of the leading manufacturers and suppliers, we are offering a wide range of Shell and Tube Heat Exchangers. Extensively demanded by various industries, our offered heat exchangers are manufactured in adherence with the industry set norms and guidelines. Perfectly suits the needs of clients, our offered heat exchangers are developed under the guidance of our professionals. Being one of the most trusted and reliable companies in the market for manufacturing and supplying of Stainless Steel Heat Exchangers. Customized as per the variegated requirements of our clients, these heat exchangers are manufactured in adherence with the industry set norms and guidelines. Precision-engineered, these heat exchangers find their application in different industries.

Our enterprise is positioned at the apex in the list of most preeminent Hot Plates exporters and suppliers in India. The electric hot plates are of excellent quality and thus exhibit unquestionable performance. The laboratory hot plates are also provided with an indicator and a regulator to manage the temperature according to the requirement. Specification Top Plate : Either made of thick mild steel heavy gauge plate (or) stainless steel of thick plate. Outer Chamber : With stainless steel (or) mild steel. Available Shape : Round, Square & Rectangular Temperature Control : By Energy regulator (or) by Mechanical Capacity Thermostat Ranges from 500C to 3000C Voltage Supply : 230 Volts AC Supply Optional Spares : 1) with 3 Heat Switch Thermometer : With 4000C Thermometer Cylinder Size Dial : 8 Inches 1000 WattsDial : 3 Inches 1000 WattsDial : 12 Inches 1500 Watts Rectangular Size 10 Inches x 16 Inches 1500 Watts12 Inches x 18 Inches 2000 Watts18 Inches x 24 Inches 4000 Watts

Brazed plate Heat Exchanger is constructed of a series of Pressed corrugated plates in stainless steel. These plates are stacked one over other with copper foil in between for Joining and kept in oven for brazing together. The plates are stacked in such a way that flow passage one side primary fluid and another channel secondary fluid passage. Features: Small Footprint Lower Hold-up Volume No Gaskets to Replace High and Low Temperaturesv BPHE plates and channel types Certain BPHEs are available with different types of channel plates where the herringbone pattern varies. The benefit of different herringbone patterns is that the hydraulic and thermal characteristics of the BPHE can be modified. For example, two BPHEs can have the same pressure drop on both sides despite different flow rates. The fluids can pass through the heat exchanger in different ways. For parallel flow BPHEs, there are two different flow configurations: co-current or counter-current There are several different versions of the channel plate packages. Examples include: Dual-circuit BPHEDual-circuit BPHE Two-pass BPHE, which corresponds to two units connected in series. Dual-over-two-pass BPHE Material combinations There are different BPHE product categories depending on material combinations and design pressures. The standard plate materials are AISI 316 stainless steel, S, vacuum-brazed with a pure copper filler, C, or a nickel-based filler, N. For demanding applications, the plates can be made of SMO 254, a stainless steel with a higher content of molybdenum.

• Plate Heat Exchanger Type: Brazed Plate, Fusion-bonded Plate, Gasketed Plate and Frame, Welded Plate and Block, Welded Plate and Frame
• Application: Heater, Cooler, Vaporizer, Condenser
• Max Output Flow rate (m3/hr): 50-100

• Height: 1000 mm
• Material: Aluminum body with acrylic frame
• Size: 250 x 250 mm
• Product Code: ELSHADDAI R/AC - 003

• Effective width: 1800mm
• Steam temperature: 100-200°
• Steam pressure: 0.8-1.3 MPa.
• Work power: 440V 50HZ.
• Motor power: 440V 50HZ.

1.Preheat cylinders conform to class of pressure vessel with national standards, and the pressure vessel and certificate of inspection certificates. 2.Preheating cylinder and each roller grinding pins by precision after finishing grinding and hard chromium plating processing, improving the finish reduced friction and durable. 3.Angle adjustment using electric adjustment, Angle range in 60-270 °arbitrary adjustment, which can effectively adjust paper of heated area. 4.Preheat urns adopt wing sealing head design, it can improve the cylinder block of artesian performance; Features steam heating,Ensure base paper heated evenly. 5.Angle electromotor adopt planets cycloid motor, has the good self-locking performance.The electrical components centralized control, can greatly improve the production efficiency.

Brazed Plate Heat Exchanger (BHE): By brazing the heat transfer plates, the BHE offers improved operating temperature and durability as well as being lightweight and compact body. The simple configuration with fewer parts allows a large amount of production, contributing to mass production and utilization of the customers' devices.

A shell and tube heat exchanger is a class of heat exchanger designs. It is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. As its name implies, this type of heat exchanger consists of a shell (a large pressure vessel) with a bundle of tubes inside it. Shell & Tube heat exchanger One fluid runs through the tubes, and another fluid flows over the tubes (through the shell) to transfer heat between the two fluids. The set of tubes is called a tube bundle, and may be composed by several types of tubes: plain, longitudinally finned, etc. One phase heat exchanger Heat exchangers with only one phase (liquid or gas) on each side can be called one-phase or single-phase heat exchangers. Two phase heat exchanger Two-phase heat exchangers can be used to heat a liquid to boil it into a gas (vapor), sometimes called boilers, or cool a vapor to condense it into a liquid (called condensers), with the phase change usually occurring on the shell side. U-Type There can be many variations on the shell and tube design. Typically, the ends of each tube are connected to plenums (sometimes called water boxes) through holes in tube sheets. The tubes may be straight or bent in the shape of a U, called U-tubes. 1-pass straight-tube heat exchangers Surface condensers in power plants are often 1-pass straight-tube heat exchangers. 2-pass straight-tube heat exchangers 2-pass designs are common because the fluid can enter and exit on the same side. This makes construction much simpler.

• Dia: 1000mm, Height : 1800mm
• Motor: 0.5HP
• Fan Blade: 500mm
• Product Code: SAMS MTL - 002

Cooling Tower  

We offer Heat Exchanger in wide range, which we are offering in a wide range. demanded by various industries, our offered heat exchangers are designed as per the client’s requirements. type : fixed tuberemovable bundle“u” tube type features : precicol provides well conceived and optimum design to suit o.e. applicationsdesigned and constructed as per is, din or tema std variants : heat transfer capacities : 1000 k.cal / hr to 10,00,000 k.cal / hrheat transfer area : 1 m2 to 500 m2shell :m.s.s.sc.stubes :m.s.s.sc.sbrasscupro-nickelcopper in plainintegrally finned profilebaffle plates :m.s.s.sc.sbrasscopperpoly propylenenylontie rods & spacers : m.s.s.sc.sbrasscopperpoly propylene facility : precicol is having state of the art in house facility for manufacture of these heat exchangers with latest technology equipments like : cnc turret punching machines for mfg of baffle platescnc 3 axis jig boring m/c, nc vertical turret milling m/c and double column radial drilling m/c for mfg of tube sheetswattage based torque controlled automatic tube expander for uniform tube expansionserration / grooving tool for tube sheet manufacturing for proper bonding of tube to tube sheetseal / seam welding m/c for high-pressure heat transfer products used with : dg setair compressorshydraulic oilquench oilcoolant oilspindle oiledible oillube oilmoldingpower plantpower plant chemicalscastingfurnaceair conditioningrefrigerationbrine chillingglycol chillingquench watercoolant waterdm waterprocesssteamair and gas applications : fertilizer plantschemical and petrochemical plantsdairies and defense factoriesautomobile industrycement and sugar industriesmachine tools manufacturing unitfurnaces manufacturing unitdiesel gen-set manufacturing unitair gas compressors manufacturing unit

• Features: Easy installation, Durability, High utility

• Features: Easy installation, Durability, High utility

• Material: Stainless Steel
• Type: Air-Cooled
• Medium used: Water
• Warranty: 12 months
• Length: Upto 12 Meters
• Heat Transfer Area: 5-500 square meters

• Type: Hot Plates
• Shape: Rectangular, Round
• Application: Cooking, Laboratory Use
• Color: Blue, Brown, Grey, Red, White
• Voltage: 110V, 220V, 380V
• Condition: New, Used
• Automatic Grade: Manual, Semi Automatic
• Power Source: Electric
• Feature: Auto Cut, Energy Saving Certified, Fast Heating, Long Life, Low Maintenance, Rust Resistance
• Warranty: 1year, 2years

The Counter Flow Cooler works on the principle of cool air flowing upwards through hot pellets moving down wards, and suction of hot air by a blower. It consists of an inlet rotary feeder, cooling hood, product distributor, unloader gate and an outlet hopper. A pneumatic suction system for extracting hot air from top is provided separately. The capacity range is made to match with the Pellet Mill capacity.

• Application: Geysers, Industrial Ovens, Heaters
• Shape: Round
• Material: Stainless Steel
• Voltage (V): 240 V
• Power (W): 1000 watt - 2500 watt
• Compatible Power: 230 V A.C
• Size: 8''

We are the leading exporters and supplier of this products.

• Type: Heat Exchangers
• Certification: ISO 9001:2008 Certified
• Weight: 100-1000kg
• Grade: AISI
• Voltage: 110V, 220V
• Condition: New
• Automatic Grade: Automatic
• Power: 3-6kw, 6-9kw
• Warranty: 1 Year
• Driven: Electric

frp cooling tower fills, lovibond tintometer, Metal Pipes, metal tins

Plate Heat Exchangers

Spiral Wound Finned Tube

gas coolers, hydraulic pneumatic systems, Pressure Vessel, Steam Boilers

Air conditioner, Freezer, Chilling Plants, Refrigeration Equipment

Cooling Towers, Plastic Scrap Grinder, mould chilling plants

Plate Heat Exchangers, water chemical, welding plates

PHE & LSS

Cooling Tower, cooling systems, Chilling Plants

Scraped Surface Heat Exchanger, steel Products, Value Test Rig

Cooling Towers